scholarly journals Structural organization of actin in the sea urchin egg cortex: microvillar elongation in the absence of actin filament bundle formation

1982 ◽  
Vol 93 (1) ◽  
pp. 24-32 ◽  
Author(s):  
DA Begg ◽  
LI Rebhun ◽  
H Hyatt
Keyword(s):  
Sea Urchin ◽  
Actin Filament ◽  
Actin Filaments ◽  
Calcium Ionophore ◽  
Ionophore A23187 ◽  
Acid Activation ◽  
Cytoplasmic Ph ◽  
Sea Urchin Egg ◽  
Filament Bundles ◽  
Filament Bundle

We have investigated the relationship between the formation of actin filament bundles and the elongation of microvilli (MV) after fertilization in sea urchin eggs. In a previous study (1979, J Cell Biol. 83:241-248) we demonstrated that increased pH induced the formation of actin filaments in isolated sea urchin egg cortices with the concomitant elongation of MV. On the basis of these results we suggested that increased cytoplasmic pH after fertilization causes a reorganization of cortical actin, which in turn provides the force for MV elongation. To test this hypothesis, we compared the morphology of microvilli in eggs activated with and without the release of fertilization acid. Activation of eggs in normal sea water with the calcium ionophore A23187 causes the release of fertilization acid and the elongation of MV containing core bundles of actin filaments. Eggs activated with A23187 in NA(+)-free water do not undergo normal fertilization acid release but develop elongated, flaccid MV. These MV contain an irregular network of actin filaments rather than the parallel bundles of filaments found in normal MV. The addition of 40 mM NaCl to these eggs results in the release of H(+) and the concomitant conversion of flaccid MV to erect MV containing typical core bundles of actin filaments. Identical results are obtained when 10 mM NH(4)Cl is substituted for NaCl. The induction of cytoplasmic alkalinization in unactivated eggs with NH(4)Cl does not cause either MV elongation or the formation of actin filament bundles . These results suggest that: (a) the elongation of MV is stimulated by a rise in intracellular free Ca(++) concentration; (b) actin filament bundle formation is triggered by an increase in cytoplasmic pH; and (c) the formation of actin filament bundles is not necessary for MV elongation but is required to provide rigid support for MV.

scholarly journals Drosophila singed, a fascin homolog, is required for actin bundle formation during oogenesis and bristle extension.

1994 ◽  
Vol 125 (2) ◽  
pp. 369-380 ◽  
Author(s):  
K Cant ◽  
B A Knowles ◽  
M S Mooseker ◽  
L Cooley
Keyword(s):  
Sea Urchin ◽  
Actin Filament ◽  
Nurse Cell ◽  
Structural Integrity ◽  
Molar Ratio ◽  
Cell Nuclei ◽  
Cytoplasmic Actin ◽  
Filament Bundles ◽  
Filament Bundle

Drosophila singed mutants were named for their gnarled bristle phenotype but severe alleles are also female sterile. Recently, singed protein was shown to have 35% peptide identity with echinoderm fascin. Fascin is found in actin filament bundles in microvilli of sea urchin eggs and in filopodial extensions in coelomocytes. We show that Drosophila singed is required for actin filament bundle formation in the cytoplasm of nurse cells during oogenesis; in severe mutants, the absence of cytoplasmic actin filament bundles allows nurse cell nuclei to lodge in ring canals and block nurse cell cytoplasm transport. Singed is also required for organized actin filament bundle formation in the cellular extension that forms a bristle; in severe mutants, the small disorganized actin filament bundles lack structural integrity and allow bristles to bend and branch during extension. Singed protein is also expressed in migratory cells of the developing egg chamber and in the socket cell of the developing bristle, but no defect is observed in these cells in singed mutants. Purified, bacterially expressed singed protein bundles actin filaments in vitro with the same stoichiometry reported for purified sea urchin fascin. Singed-saturated actin bundles have a molar ratio of singed/actin of approximately 1:4.3 and a transverse cross-banding pattern of 12 nm seen using electron microscopy. Our results suggest that singed protein is required for actin filament bundle formation and is a Drosophila homolog of echinoderm fascin.

scholarly journals Actin filaments elongate from their membrane-associated ends

1981 ◽  
Vol 90 (2) ◽  
pp. 485-494 ◽  
Author(s):  
LG Tilney ◽  
EM Bonder ◽  
DJ DeRosier
Keyword(s):  
Plasma Membrane ◽  
Actin Filament ◽  
Actin Filaments ◽  
The Other ◽  
Dense Material ◽  
Thin Sections ◽  
Vacuole Membrane ◽  
Filament Bundles ◽  
Filament Bundle

In limulus sperm an actin filament bundle 55 mum in length extends from the acrosomal vacuole membrane through a canal in the nucleus and then coils in a regular fashion around the base of the nucleus. The bundle expands systematically from 15 filaments near the acrosomal vacuole to 85 filaments at the basal end. Thin sections of sperm fixed during stages in spermatid maturation reveal that the filament bundle begins to assemble on dense material attached to the acrosomal vacuole membrane. In micrographs fo these early stages in maturation, short bundles are seen extending posteriorly from the dense material. The significance is that these short, developing bundles have about 85 filaments, suggesting that the 85-filament end of the bundle is assembled first. By using filament bundles isolated and incubated in vitro with G actin from muscle, we can determine the end "preferred" for addition of actin monomers during polymerization. The end that would be associated with the acrosomal vacuole membrane, a membrane destined to be continuous with the plasma membrane, is preferred about 10 times over the other, thicker end. Decoration of the newly polymerized portions of the filament bundle with subfragment 1 of myosin reveals that the arrowheads point away from the acrosomal vacuole membrane, as is true of other actin filament bundles attached to membranes. From these observations we conclude that the bundle is nucleated from the dense material associated with the acrosomal vacuole and that monomers are added to the membrane-associated end. As monomers are added at the dense material, the thick first-made end of the filament bundle is pushed down through the nucleus where, upon reaching the base of the nucleus, it coils up. Tapering is brought about by the capping of the peripheral filaments in the bundle.

scholarly journals The changes in structural organization of actin in the sea urchin egg cortex in response to hydrostatic pressure.

1983 ◽  
Vol 97 (6) ◽  
pp. 1795-1805 ◽  
Author(s):  
D A Begg ◽  
E D Salmon ◽  
H A Hyatt
Keyword(s):  
Hydrostatic Pressure ◽  
Sea Urchin ◽  
Actin Filament ◽  
Structural Organization ◽  
Cleavage Furrow ◽  
Cortical Actin ◽  
Cleavage Division ◽  
Sea Urchin Egg ◽  
Filament Bundles ◽  
Egg Cortex

We have used hydrostatic pressure to study the structural organization of actin in the sea urchin egg cortex and the role of cortical actin in early development. Pressurization of Arbacia punctulata eggs to 6,000 psi at the first cleavage division caused the regression of the cleavage furrow and the disappearance of actin filament bundles from the microvilli. Within 30 s to 1 min of decompression these bundles reformed and furrowing resumed. Pressurization of dividing eggs to 7,500 psi caused both the regression of the cleavage furrow and the complete loss of microvilli from the egg surface. Following release from this higher pressure, the eggs underwent extensive, uncoordinated surface contractions, but failed to cleave. The eggs gradually regained their spherical shape and cleaved directly into four cells at the second cleavage division. Microvilli reformed on the egg surface over a period of time corresponding to that required for the recovery of normal egg shape and stability. During the initial stages of their regrowth the microvilli contained a network of actin filaments that began to transform into bundles when the microvilli had reached approximately 2/3 of their final length. These results demonstrate that moderate levels of hydrostatic pressure cause the reversible disruption of cortical actin organization, and suggest that this network of actin stabilizes the egg surface and participates in the formation of the contractile ring during cytokinesis. The results also demonstrate that actin filament bundles are not required for the regrowth of microvilli after their removal by pressurization. Preliminary experiments demonstrate that F-actin is not depolymerized in vitro by pressures up to 10,000 psi and suggest that pressure may act indirectly in vivo, either by changing the intracellular ionic environment or by altering the interaction of actin binding proteins with actin.

scholarly journals αE-catenin actin-binding domain alters actin filament conformation and regulates binding of nucleation and disassembly factors

2013 ◽  
Vol 24 (23) ◽  
pp. 3710-3720 ◽  
Author(s):  
Scott D. Hansen ◽  
Adam V. Kwiatkowski ◽  
Chung-Yueh Ouyang ◽  
HongJun Liu ◽  
Sabine Pokutta ◽  
...  
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Binding Domain ◽  
Actin Binding ◽  
Filamentous Actin ◽  
Filament Structure ◽  
Actin Binding Domain ◽  
Filament Bundles ◽  
Underlying Mechanisms ◽  
Cell Cell

The actin-binding protein αE-catenin may contribute to transitions between cell migration and cell–cell adhesion that depend on remodeling the actin cytoskeleton, but the underlying mechanisms are unknown. We show that the αE-catenin actin-binding domain (ABD) binds cooperatively to individual actin filaments and that binding is accompanied by a conformational change in the actin protomer that affects filament structure. αE-catenin ABD binding limits barbed-end growth, especially in actin filament bundles. αE-catenin ABD inhibits actin filament branching by the Arp2/3 complex and severing by cofilin, both of which contact regions of the actin protomer that are structurally altered by αE-catenin ABD binding. In epithelial cells, there is little correlation between the distribution of αE-catenin and the Arp2/3 complex at developing cell–cell contacts. Our results indicate that αE-catenin binding to filamentous actin favors assembly of unbranched filament bundles that are protected from severing over more dynamic, branched filament arrays.

scholarly journals Platelet-activating factor both stimulates and "primes" human polymorphonuclear leukocyte actin filament assembly

Blood ◽  
1987 ◽  
Vol 70 (6) ◽  
pp. 1921-1927 ◽  
Author(s):  
M Shalit ◽  
GA Dabiri ◽  
FS Southwick
Keyword(s):  
Actin Filament ◽  
Polymorphonuclear Leukocyte ◽  
Actin Polymerization ◽  
Platelet Activating Factor ◽  
Calcium Ionophore ◽  
Leukotriene B4 ◽  
Calcium Ionophore A23187 ◽  
Optimal Concentration ◽  
Ionophore A23187 ◽  
Filament Assembly

Abstract The phospholipid inflammatory mediator, platelet-activating factor (PAF), can stimulate polymorphonuclear leukocyte (PMN) chemotaxis. Conversion of cytoplasmic actin from monomers to filaments is associated with PMN motile functions. Using the fluorescent actin filament stain nitrobenzodiaxole phallicidin, we have investigated PAF's effects on human PMN actin polymerization. Concentrations of PAF between 1 x 10(-11) to 1 x 10(-6) mol/L induced actin filament (F- actin) assembly. An optimal concentration of PAF (1–5 x 10(-8) mol/L) induced a significantly lower rise in relative F-actin content (1.72 +/- 0.07 SEM) than an optimal concentration (5 x 10(-7) mol/L) of the chemotactic peptide FMLP (2.21 +/- 0.06). Unlike FMLP (F-actin content: 1.25 +/- 0.04 at five seconds), PAF stimulation was associated with a delay of more than five seconds (1.04 +/- 0.01 at five seconds) before an increase in F-actin could be detected. F-actin concentration reached maximum levels by 30 to 60 seconds. Prolonged stimulation (20 minutes) with PAF was associated with two phases of polymerization and depolymerization. Like FMLP, the initiation of actin filament assembly by PAF required receptor occupancy, this reaction being totally blocked by the PAF receptor inhibitor, SKI 63–441. As evidenced by the lack of inhibition by nordihydroguaiaretic acid (5 to 20 mumol/L), the production of leukotriene B4 was not required for the PAF-induced changes in F-actin. Like FMLP, PAF's ability to stimulate PMN actin polymerization was inhibited by pertussis toxin (.05 to 2.5 micrograms/mL) but not impaired by the addition of EGTA and/or the calcium ionophore A23187. Preincubation with 1 x 10(-11) to 1 x 10(-8) mol/L PAF for 2 to 60 minutes enhanced the rise in F-actin content induced by low concentrations of FMLP (5 x 10(-12) to 1 x 10(-10) mol/L) indicating that this phospholipid was capable of “priming” the PMN actin polymerization response.

scholarly journals F-actin bundles in Drosophila bristles are assembled from modules composed of short filaments.

1996 ◽  
Vol 135 (5) ◽  
pp. 1291-1308 ◽  
Author(s):  
L G Tilney ◽  
P Connelly ◽  
S Smith ◽  
G M Guild
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Modular Design ◽  
Thin Sections ◽  
Actin Bundle ◽  
Actin Bundles ◽  
Phalloidin Staining ◽  
Filament Bundles ◽  
End To End ◽  
As If

The actin bundles in Drosophila bristles run the length of the bristle cell and are accordingly 65 microns (microchaetes) or 400 microns (macrochaetes) in length, depending on the bristle type. Shortly after completion of bristle elongation in pupae, the actin bundles break down as the bristle surface becomes chitinized. The bundles break down in a bizarre way; it is as if each bundle is sawed transversely into pieces that average 3 microns in length. Disassembly of the actin filaments proceeds at the "sawed" surfaces. In all cases, the cuts in adjacent bundles appear in transverse register. From these images, we suspected that each actin bundle is made up of a series of shorter bundles or modules that are attached end-to-end. With fluorescent phalloidin staining and serial thin sections, we show that the modular design is present in nondegenerating bundles. Decoration of the actin filaments in adjacent bundles in the same bristle with subfragment 1 of myosin reveals that the actin filaments in every module have the same polarity. To study how modules form developmentally, we sectioned newly formed and elongating bristles. At the bristle tip are numerous tiny clusters of 6-10 filaments. These clusters become connected together more basally to form filament bundles that are poorly organized, initially, but with time become maximally cross-linked. Additional filaments are then added to the periphery of these organized bundle modules. All these observations make us aware of a new mechanism for the formation and elongation of actin filament bundles, one in which short bundles are assembled and attached end-to-end to other short bundles, as are the vertical girders between the floors of a skyscraper.

Sign in / Sign up

Export Citation Format

Share Document