scholarly journals Mg2+ Modulates Voltage-Dependent Activation in Ether-à-Go-Go Potassium Channels by Binding between Transmembrane Segments S2 and S3

2000 ◽  
Vol 116 (5) ◽  
pp. 663-678 ◽  
Author(s):  
William R. Silverman ◽  
Chih-Yung Tang ◽  
Allan F. Mock ◽  
Kyung-Bong Huh ◽  
Diane M. Papazian
Keyword(s):  
Potassium Channels ◽  
Binding Site ◽  
Voltage Sensor ◽  
Wild Type ◽  
Activation Kinetics ◽  
Fast Kinetics ◽  
K Channels ◽  
Transmembrane Segments ◽  
Acidic Residues ◽  
Voltage Dependent

Extracellular Mg2+ directly modulates voltage-dependent activation in ether-à-go-go (eag) potassium channels, slowing the kinetics of ionic and gating currents (Tang, C.-Y., F. Bezanilla, and D.M. Papazian. 2000. J. Gen. Physiol. 115:319-337). To exert its effect, Mg2+ presumably binds to a site in or near the eag voltage sensor. We have tested the hypothesis that acidic residues unique to eag family members, located in transmembrane segments S2 and S3, contribute to the Mg2+-binding site. Two eag-specific acidic residues and three acidic residues found in the S2 and S3 segments of all voltage-dependent K+ channels were individually mutated in Drosophila eag, mutant channels were expressed in Xenopus oocytes, and the effect of Mg2+ on ionic current kinetics was measured using a two electrode voltage clamp. Neutralization of eag-specific residues D278 in S2 and D327 in S3 eliminated Mg2+-sensitivity and mimicked the slowing of activation kinetics caused by Mg2+ binding to the wild-type channel. These results suggest that Mg2+ modulates activation kinetics in wild-type eag by screening the negatively charged side chains of D278 and D327. Therefore, these residues are likely to coordinate the bound ion. In contrast, neutralization of the widely conserved residues D284 in S2 and D319 in S3 preserved the fast kinetics seen in wild-type eag in the absence of Mg2+, indicating that D284 and D319 do not mediate the slowing of activation caused by Mg2+ binding. Mutations at D284 affected the eag gating pathway, shifting the voltage dependence of Mg2+-sensitive, rate limiting transitions in the hyperpolarized direction. Another widely conserved residue, D274 in S2, is not required for Mg2+ sensitivity but is in the vicinity of the binding site. We conclude that Mg2+ binds in a water-filled pocket between S2 and S3 and thereby modulates voltage-dependent gating. The identification of this site constrains the packing of transmembrane segments in the voltage sensor of K+ channels, and suggests a molecular mechanism by which extracellular cations modulate eag activation kinetics.

scholarly journals Interfacial gating triad is crucial for electromechanical transduction in voltage-activated potassium channels

2014 ◽  
Vol 144 (5) ◽  
pp. 457-467 ◽  
Author(s):  
Sandipan Chowdhury ◽  
Benjamin M. Haehnel ◽  
Baron Chanda
Keyword(s):  
Potassium Channels ◽  
Conformational Changes ◽  
Electromechanical Coupling ◽  
Structural Integrity ◽  
Voltage Sensor ◽  
Amino Acid Residues ◽  
Kv Channel ◽  
Electromechanical Transduction ◽  
Voltage Dependent ◽  
Graph Theoretical Approach

Voltage-dependent potassium channels play a crucial role in electrical excitability and cellular signaling by regulating potassium ion flux across membranes. Movement of charged residues in the voltage-sensing domain leads to a series of conformational changes that culminate in channel opening in response to changes in membrane potential. However, the molecular machinery that relays these conformational changes from voltage sensor to the pore is not well understood. Here we use generalized interaction-energy analysis (GIA) to estimate the strength of site-specific interactions between amino acid residues putatively involved in the electromechanical coupling of the voltage sensor and pore in the outwardly rectifying KV channel. We identified candidate interactors at the interface between the S4–S5 linker and the pore domain using a structure-guided graph theoretical approach that revealed clusters of conserved and closely packed residues. One such cluster, located at the intracellular intersubunit interface, comprises three residues (arginine 394, glutamate 395, and tyrosine 485) that interact with each other. The calculated interaction energies were 3–5 kcal, which is especially notable given that the net free-energy change during activation of the Shaker KV channel is ∼14 kcal. We find that this triad is delicately maintained by balance of interactions that are responsible for structural integrity of the intersubunit interface while maintaining sufficient flexibility at a critical gating hinge for optimal transmission of force to the pore gate.

scholarly journals R1 in the Shaker S4 occupies the gating charge transfer center in the resting state

2011 ◽  
Vol 138 (2) ◽  
pp. 155-163 ◽  
Author(s):  
Meng-chin A. Lin ◽  
Jui-Yi Hsieh ◽  
Allan F. Mock ◽  
Diane M. Papazian
Keyword(s):  
Charge Transfer ◽  
Binding Site ◽  
Resting State ◽  
Slow Component ◽  
Maximum Amplitude ◽  
Voltage Sensor ◽  
Shaker Channels ◽  
Gating Charge ◽  
Voltage Dependent ◽  
Arginine Residues

During voltage-dependent activation in Shaker channels, four arginine residues in the S4 segment (R1–R4) cross the transmembrane electric field. It has been proposed that R1–R4 movement is facilitated by a “gating charge transfer center” comprising a phenylalanine (F290) in S2 plus two acidic residues, one each in S2 and S3. According to this proposal, R1 occupies the charge transfer center in the resting state, defined as the conformation in which S4 is maximally retracted toward the cytoplasm. However, other evidence suggests that R1 is located extracellular to the charge transfer center, near I287 in S2, in the resting state. To investigate the resting position of R1, we mutated I287 to histidine (I287H), paired it with histidine mutations of key voltage sensor residues, and determined the effect of extracellular Zn2+ on channel activity. In I287H+R1H, Zn2+ generated a slow component of activation with a maximum amplitude (Aslow,max) of ∼56%, indicating that only a fraction of voltage sensors can bind Zn2+ at a holding potential of −80 mV. Aslow,max decreased after applying either depolarizing or hyperpolarizing prepulses from −80 mV. The decline of Aslow,max after negative prepulses indicates that R1 moves inward to abolish ion binding, going beyond the point where reorientation of the I287H and R1H side chains would reestablish a binding site. These data support the proposal that R1 occupies the charge transfer center upon hyperpolarization. Consistent with this, pairing I287H with A359H in the S3–S4 loop generated a Zn2+-binding site. At saturating concentrations, Aslow,max reached 100%, indicating that Zn2+ traps the I287H+A359H voltage sensor in an absorbing conformation. Transferring I287H+A359H into a mutant background that stabilizes the resting state significantly enhanced Zn2+ binding at −80 mV. Our results strongly support the conclusion that R1 occupies the gating charge transfer center in the resting conformation.

scholarly journals Dihydropyridine Action on Voltage-dependent Potassium Channels Expressed in Xenopus Oocytes

1997 ◽  
Vol 109 (2) ◽  
pp. 169-180 ◽  
Author(s):  
Vladimir Avdonin ◽  
Erwin F. Shibata ◽  
Toshinori Hoshi
Keyword(s):  
Ion Channels ◽  
Potassium Channels ◽  
Xenopus Oocytes ◽  
K Channels ◽  
Open Time ◽  
Voltage Dependent ◽  
Ca2 Channels

Dihydropyridines (DHPs) are well known for their effects on L-type voltage-dependent Ca2+ channels. However, these drugs also affect other voltage-dependent ion channels, including Shaker K+ channels. We examined the effects of DHPs on the Shaker K+ channels expressed in Xenopus oocytes. Intracellular applications of DHPs quickly and reversibly induced apparent inactivation in the Shaker K+ mutant channels with disrupted N- and C-type inactivation. We found that DHPs interact with the open state of the channel as evidenced by the decreased mean open time. The DHPs effects are voltage-dependent, becoming more effective with hyperpolarization. A model which involves binding of two DHP molecules to the channel is consistent with the results obtained in our experiments.

scholarly journals Modulation of the Voltage Sensor of L-type Ca2+ Channels by Intracellular Ca2+

2004 ◽  
Vol 123 (5) ◽  
pp. 555-571 ◽  
Author(s):  
Dmytro Isaev ◽  
Karisa Solt ◽  
Oksana Gurtovaya ◽  
John P. Reeves ◽  
Roman Shirokov
Keyword(s):  
Intracellular Calcium ◽  
Calcium Binding ◽  
Voltage Dependence ◽  
Voltage Sensor ◽  
Charge Movement ◽  
Wild Type ◽  
Calcium Binding Site ◽  
Gating Charge ◽  
Voltage Dependent ◽  
Charge Movements

Both intracellular calcium and transmembrane voltage cause inactivation, or spontaneous closure, of L-type (CaV1.2) calcium channels. Here we show that long-lasting elevations of intracellular calcium to the concentrations that are expected to be near an open channel (≥100 μM) completely and reversibly blocked calcium current through L-type channels. Although charge movements associated with the opening (ON) motion of the channel's voltage sensor were not altered by high calcium, the closing (OFF) transition was impeded. In two-pulse experiments, the blockade of calcium current and the reduction of gating charge movements available for the second pulse developed in parallel during calcium load. The effect depended steeply on voltage and occurred only after a third of the total gating charge had moved. Based on that, we conclude that the calcium binding site is located either in the channel's central cavity behind the voltage-dependent gate, or it is formed de novo during depolarization through voltage-dependent rearrangements just preceding the opening of the gate. The reduction of the OFF charge was due to the negative shift in the voltage dependence of charge movement, as previously observed for voltage-dependent inactivation. Elevation of intracellular calcium concentration from ∼0.1 to 100–300 μM sped up the conversion of the gating charge into the negatively distributed mode 10–100-fold. Since the “IQ-AA” mutant with disabled calcium/calmodulin regulation of inactivation was affected by intracellular calcium similarly to the wild-type, calcium/calmodulin binding to the “IQ” motif apparently is not involved in the observed changes of voltage-dependent gating. Although calcium influx through the wild-type open channels does not cause a detectable negative shift in the voltage dependence of their charge movement, the shift was readily observable in the Δ1733 carboxyl terminus deletion mutant, which produces fewer nonconducting channels. We propose that the opening movement of the voltage sensor exposes a novel calcium binding site that mediates inactivation.

scholarly journals Trapping of Organic Blockers by Closing of Voltage-dependent K+ Channels

1997 ◽  
Vol 109 (5) ◽  
pp. 527-535 ◽  
Author(s):  
Miguel Holmgren ◽  
Paula L. Smith ◽  
Gary Yellen
Keyword(s):  
Quaternary Ammonium ◽  
Organic Molecules ◽  
Slow Phase ◽  
Channel Blockers ◽  
Wild Type ◽  
Squid Axon ◽  
Small Organic Molecules ◽  
K Channels ◽  
Voltage Dependent ◽  
Ammonium Compounds

Small organic molecules, like quaternary ammonium compounds, have long been used to probe both the permeation and gating of voltage-dependent K+ channels. For most K+ channels, intracellularly applied quaternary ammonium (QA) compounds such as tetraethylammonium (TEA) and decyltriethylammonium (C10) behave primarily as open channel blockers: they can enter the channel only when it is open, and they must dissociate before the channel can close. In some cases, it is possible to force the channel to close with a QA blocker still bound, with the result that the blocker is “trapped.” Armstrong (J. Gen. Physiol. 58:413–437) found that at very negative voltages, squid axon K+ channels exhibited a slow phase of recovery from QA blockade consistent with such trapping. In our studies on the cloned Shaker channel, we find that wild-type channels can trap neither TEA nor C10, but channels with a point mutation in S6 can trap either compound very efficiently. The trapping occurs with very little change in the energetics of channel gating, suggesting that in these channels the gate may function as a trap door or hinged lid that occludes access from the intracellular solution to the blocker site and to the narrow ion-selective pore.

scholarly journals Two Separate Interfaces between the Voltage Sensor and Pore Are Required for the Function of Voltage-Dependent K+ Channels

PLoS Biology ◽  
2009 ◽  
Vol 7 (3) ◽  
pp. e1000047 ◽  
Author(s):  
Seok-Yong Lee ◽  
Anirban Banerjee ◽  
Roderick MacKinnon
Keyword(s):  
Voltage Sensor ◽  
K Channels ◽  
Voltage Dependent

scholarly journals AKT2/3 Subunits Render Guard Cell K+ Channels Ca2+ Sensitive

2005 ◽  
Vol 125 (5) ◽  
pp. 483-492 ◽  
Author(s):  
Natalya Ivashikina ◽  
Rosalia Deeken ◽  
Susanne Fischer ◽  
Peter Ache ◽  
Rainer Hedrich
Keyword(s):  
Guard Cell ◽  
Guard Cells ◽  
Inward Rectifier ◽  
Hek293 Cells ◽  
K Channel ◽  
Dependent Manner ◽  
Wild Type ◽  
K Channels ◽  
Isolation And Characterization ◽  
Voltage Dependent

Inward-rectifying K+ channels serve as a major pathway for Ca2+-sensitive K+ influx into guard cells. Arabidopsis thaliana guard cell inward-rectifying K+ channels are assembled from multiple K+ channel subunits. Following the recent isolation and characterization of an akt2/3-1 knockout mutant, we examined whether the AKT2/3 subunit carries the Ca2+ sensitivity of the guard cell inward rectifier. Quantification of RT-PCR products showed that despite the absence of AKT2 transcripts in guard cells of the knockout plant, expression levels of the other K+ channel subunits (KAT1, KAT2, AKT1, and AtKC1) remained largely unaffected. Patch-clamp experiments with guard cell protoplasts from wild type and akt2/3-1 mutant, however, revealed pronounced differences in Ca2+ sensitivity of the K+ inward rectifier. Wild-type channels were blocked by extracellular Ca2+ in a concentration- and voltage-dependent manner. Akt2/3-1 mutants lacked the voltage-dependent Ca2+ block, characteristic for the K+ inward rectifier. To confirm the akt2/3-1 phenotype, two independent knockout mutants, akt2-1 and akt2::En-1 were tested, demonstrating that the loss of AKT2/3 indeed affects the Ca2+ dependence of guard cell inward rectifier. In contrast to AKT2 knockout plants, AKT1, AtKC1, and KAT1 loss-of-function mutants retained Ca2+ block of the guard cell inward rectifier. When expressed in HEK293 cells, AKT2 channel displayed a pronounced susceptibility toward extracellular Ca2+, while the dominant guard cell K+ channel KAT2 was Ca2+ insensitive. Thus, we conclude that the AKT2/3 subunit constitutes the Ca2+ sensitivity of the guard cell K+ uptake channel.

Sign in / Sign up

Export Citation Format

Share Document