Damage quantification of aluminum plates using SC-DTW method based on Lamb waves

Author(s):  
Daiping Wei ◽  
Xiaofeng Liu ◽  
Bangxin Wang ◽  
Zhi Tang ◽  
Lin Bo

Abstract Lamb waves were utilized to quantify micro-crack damage in aluminum plates, and the scattering and mode conversion of Lamb waves passing through cracks were analyzed. The dynamic time warping (DWT) method was used to match and compare each Lamb wave time series that represented different damage degrees. The matching difference between the damaged plate and undamaged plate was taken as a marker to measure the damage degree of the workpiece. At the same time, due to the pathological alignment of traditional DTW methods, the shape context (SC) profile recognition method was introduced to optimize the algorithm for calculating the distance between sampling points in the DTW method and solve the pathological alignment problem. Finally, the SC-DTW method based on Lamb waves was verified by the finite element simulation model and bending test of aluminum plates. The results showed that the method was feasible for quantifying the damage degree of aluminum plates and had a great advantage in the analysis and processing of time series in low-sampling frequency and high-noise scenarios.

2019 ◽  
Vol 24 (2) ◽  
pp. 320-326 ◽  
Author(s):  
Wen-Fa Zhu ◽  
Hai-Yan Zhang Zhang ◽  
Meng-Yun Xu ◽  
Guo-Peng Fan

The study investigates the feasibility of the Lamb wave topological imaging method for detecting multiple blindholes in an isotropic plate. The topological imaging method is performed based on the computations of two wave fields, a forward and an adjoint, in the defect-free reference medium using different emitting sources. The image is computed by multiplying the forward and adjoint wave fields together and integrating them over time or frequency. The interferences of multimode aliasing and the scattering effect can thus be eliminated at the defectfree positions with an improved image resolution. To investigate the physical mechanism, the refocusing process of the multimode Lamb waves at the defect positions is presented by a face-to-face comparison between the snapshots of the forward and adjoint wave fields using the finite element simulation. The Lamb wave topological imaging method is numerically and experimentally verified to identify multiple blind-holes in an isotropic aluminium plate. The results demonstrate that the topological imaging method enables the suppression of the sartefacts resulting from the mode conversion and achieve high-resolution imaging of the blind defects


2020 ◽  
Author(s):  
Hsiao-Ko Chang ◽  
Hui-Chih Wang ◽  
Chih-Fen Huang ◽  
Feipei Lai

BACKGROUND In most of Taiwan’s medical institutions, congestion is a serious problem for emergency departments. Due to a lack of beds, patients spend more time in emergency retention zones, which make it difficult to detect cardiac arrest (CA). OBJECTIVE We seek to develop a pharmaceutical early warning model to predict cardiac arrest in emergency departments via drug classification and medical expert suggestion. METHODS We propose a new early warning score model for detecting cardiac arrest via pharmaceutical classification and by using a sliding window; we apply learning-based algorithms to time-series data for a Pharmaceutical Early Warning Scoring Model (PEWSM). By treating pharmaceutical features as a dynamic time-series factor for cardiopulmonary resuscitation (CPR) patients, we increase sensitivity, reduce false alarm rates and mortality, and increase the model’s accuracy. To evaluate the proposed model we use the area under the receiver operating characteristic curve (AUROC). RESULTS Four important findings are as follows: (1) We identify the most important drug predictors: bits, and replenishers and regulators of water and electrolytes. The best AUROC of bits is 85%; that of replenishers and regulators of water and electrolytes is 86%. These two features are the most influential of the drug features in the task. (2) We verify feature selection, in which accounting for drugs improve the accuracy: In Task 1, the best AUROC of vital signs is 77%, and that of all features is 86%. In Task 2, the best AUROC of all features is 85%, which demonstrates that thus accounting for the drugs significantly affects prediction. (3) We use a better model: For traditional machine learning, this study adds a new AI technology: the long short-term memory (LSTM) model with the best time-series accuracy, comparable to the traditional random forest (RF) model; the two AUROC measures are 85%. (4) We determine whether the event can be predicted beforehand: The best classifier is still an RF model, in which the observational starting time is 4 hours before the CPR event. Although the accuracy is impaired, the predictive accuracy still reaches 70%. Therefore, we believe that CPR events can be predicted four hours before the event. CONCLUSIONS This paper uses a sliding window to account for dynamic time-series data consisting of the patient’s vital signs and drug injections. In a comparison with NEWS, we improve predictive accuracy via feature selection, which includes drugs as features. In addition, LSTM yields better performance with time-series data. The proposed PEWSM, which offers 4-hour predictions, is better than the National Early Warning Score (NEWS) in the literature. This also confirms that the doctor’s heuristic rules are consistent with the results found by machine learning algorithms.


2020 ◽  
Author(s):  
Hsiao-Ko Chang ◽  
Hui-Chih Wang ◽  
Chih-Fen Huang ◽  
Feipei Lai

BACKGROUND In most of Taiwan’s medical institutions, congestion is a serious problem for emergency departments. Due to a lack of beds, patients spend more time in emergency retention zones, which make it difficult to detect cardiac arrest (CA). OBJECTIVE We seek to develop a Drug Early Warning System Model (DEWSM), it included drug injections and vital signs as this research important features. We use it to predict cardiac arrest in emergency departments via drug classification and medical expert suggestion. METHODS We propose this new model for detecting cardiac arrest via drug classification and by using a sliding window; we apply learning-based algorithms to time-series data for a DEWSM. By treating drug features as a dynamic time-series factor for cardiopulmonary resuscitation (CPR) patients, we increase sensitivity, reduce false alarm rates and mortality, and increase the model’s accuracy. To evaluate the proposed model, we use the area under the receiver operating characteristic curve (AUROC). RESULTS Four important findings are as follows: (1) We identify the most important drug predictors: bits (intravenous therapy), and replenishers and regulators of water and electrolytes (fluid and electrolyte supplement). The best AUROC of bits is 85%, it means the medical expert suggest the drug features: bits, it will affect the vital signs, and then the evaluate this model correctly classified patients with CPR reach 85%; that of replenishers and regulators of water and electrolytes is 86%. These two features are the most influential of the drug features in the task. (2) We verify feature selection, in which accounting for drugs improve the accuracy: In Task 1, the best AUROC of vital signs is 77%, and that of all features is 86%. In Task 2, the best AUROC of all features is 85%, which demonstrates that thus accounting for the drugs significantly affects prediction. (3) We use a better model: For traditional machine learning, this study adds a new AI technology: the long short-term memory (LSTM) model with the best time-series accuracy, comparable to the traditional random forest (RF) model; the two AUROC measures are 85%. It can be seen that the use of new AI technology will achieve better results, currently comparable to the accuracy of traditional common RF, and the LSTM model can be adjusted in the future to obtain better results. (4) We determine whether the event can be predicted beforehand: The best classifier is still an RF model, in which the observational starting time is 4 hours before the CPR event. Although the accuracy is impaired, the predictive accuracy still reaches 70%. Therefore, we believe that CPR events can be predicted four hours before the event. CONCLUSIONS This paper uses a sliding window to account for dynamic time-series data consisting of the patient’s vital signs and drug injections. The National Early Warning Score (NEWS) only focuses on the score of vital signs, and does not include factors related to drug injections. In this study, the experimental results of adding the drug injections are better than only vital signs. In a comparison with NEWS, we improve predictive accuracy via feature selection, which includes drugs as features. In addition, we use traditional machine learning methods and deep learning (using LSTM method as the main processing time series data) as the basis for comparison of this research. The proposed DEWSM, which offers 4-hour predictions, is better than the NEWS in the literature. This also confirms that the doctor’s heuristic rules are consistent with the results found by machine learning algorithms.


Entropy ◽  
2021 ◽  
Vol 23 (6) ◽  
pp. 731
Author(s):  
Mengxia Liang ◽  
Xiaolong Wang ◽  
Shaocong Wu

Finding the correlation between stocks is an effective method for screening and adjusting investment portfolios for investors. One single temporal feature or static nontemporal features are generally used in most studies to measure the similarity between stocks. However, these features are not sufficient to explore phenomena such as price fluctuations similar in shape but unequal in length which may be caused by multiple temporal features. To research stock price volatilities entirely, mining the correlation between stocks should be considered from the point view of multiple features described as time series, including closing price, etc. In this paper, a time-sensitive composite similarity model designed for multivariate time-series correlation analysis based on dynamic time warping is proposed. First, a stock is chosen as the benchmark, and the multivariate time series are segmented by the peaks and troughs time-series segmentation (PTS) algorithm. Second, similar stocks are screened out by similarity. Finally, the rate of rising or falling together between stock pairs is used to verify the proposed model’s effectiveness. Compared with other models, the composite similarity model brings in multiple temporal features and is generalizable for numerical multivariate time series in different fields. The results show that the proposed model is very promising.


Author(s):  
Aleksandra Rutkowska ◽  
Magdalena Szyszko

AbstractThis study provides an application of dynamic time warping algorithm with a new window constraint to assess consumer expectations’ information content regarding current and future inflation. Our study’s contribution is the novel application of DTW for testing expectations’ forward-lookingness. Additionally, we modify the algorithm to adjust it for a specific question on the information content of our data. The DTW overcomes constraints of the standard tool that examines forward-lookingness: DTW does not impose assumptions on time series properties. In empirical study we cover seven European counties and compare the DTW outcomes with the results of previous studies in these economies using a standard methodology. The research period covers 2001 to mid-2018. Application of DTW provides information on the degree of expectations’ forward-lookingness. The result, after standardization, are similar to the standard parameters of hybrid specification of expectations. Moreover, the rankings of most forward-looking consumers are replicated. Our results confirm the economic intuition, and they do not contradict previous studies.


Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 4024
Author(s):  
Krzysztof Dmytrów ◽  
Joanna Landmesser ◽  
Beata Bieszk-Stolorz

The main objective of the study is to assess the similarity between the time series of energy commodity prices and the time series of daily COVID-19 cases. The COVID-19 pandemic affects all aspects of the global economy. Although this impact is multifaceted, we assess the connections between the number of COVID-19 cases and the energy commodities sector. We analyse these connections by using the Dynamic Time Warping (DTW) method. On this basis, we calculate the similarity measure—the DTW distance between the time series—and use it to group the energy commodities according to their price change. Our analysis also includes finding the time shifts between daily COVID-19 cases and commodity prices in subperiods according to the chronology of the COVID-19 pandemic. Our findings are that commodities such as ULSD, heating oil, crude oil, and gasoline are weakly associated with COVID-19. On the other hand, natural gas, palm oil, CO2 allowances, and ethanol are strongly associated with the development of the pandemic.


Sign in / Sign up

Export Citation Format

Share Document