Crystal melting processes of propylene carbonate and 1,3-propanediol investigated by the reed-vibration mechanical spectroscopy for liquids

2019 ◽  
Vol 28 (9) ◽  
pp. 096401
Author(s):  
Li-Na Wang ◽  
Xing-Yu Zhao ◽  
Heng-Wei Zhou ◽  
Li Zhang ◽  
Yi-Neng Huang
2020 ◽  
Vol 167 (4) ◽  
pp. 040509 ◽  
Author(s):  
J. Atik ◽  
S. Röser ◽  
R. Wagner ◽  
D. Berghus ◽  
M. Winter ◽  
...  

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 785
Author(s):  
Tai-Feng Hung ◽  
Tzu-Hsien Hsieh ◽  
Feng-Shun Tseng ◽  
Lu-Yu Wang ◽  
Chang-Chung Yang ◽  
...  

Rational design and development of the electrodes with high-mass loading yet maintaining the excellent electrochemical properties are significant for a variety of electrochemical energy storage applications. In comparison with the slurry-casted electrode, herein, a hierarchically porous activated carbon (HPAC) electrode with higher mass loading (8.3 ± 0.2 mg/cm2) is successfully prepared. The pouch-type symmetric device (1 cell) with the propylene carbonate-based electrolyte shows the rate capability (7.1 F at 1 mA/cm2 and 4.8 F at 10 mA/cm2) and the cycling stability (83% at 12,000 cycles). On the other hand, an initial discharge capacitance of 32.4 F and the capacitance retention of 96% after 30,000 cycles are delivered from a pouch-type symmetric supercapacitor (five cells). The corresponding electrochemical performances are attributed to the fascinating properties of the HPAC and the synergistic features of the resulting electrode.


2021 ◽  
Vol 867 ◽  
pp. 158880
Author(s):  
J. Ibáñez-Pérez ◽  
M.L. Nó ◽  
M. Oehring ◽  
H. Clemens ◽  
J.M. San Juan

2021 ◽  
Vol 12 (12) ◽  
pp. 1776-1786
Author(s):  
Zhou Wang ◽  
Ying Mu

Stereoregular poly(propylene carbonate)s and poly(propylene succinate-block-carbonate)s were synthesized with new chiral salenCo(iii) catalysts carrying bulky substituents.


2012 ◽  
Vol 184 ◽  
pp. 416-421 ◽  
Author(s):  
H. Mizubayashi ◽  
I. Sakata ◽  
H. Tanimoto

For hydrogenated amorphous silicon (a-Si:H) films deposited at temperatures between 423 K and 623 K (a-Si:H423Kand so on), the light-induced changes in the internal friction between 80 K and 400 K were studied. The internal friction is associated with H2motion in microvoid networks, and shows the mild temperature dependence between about 80 K and 300 K (Q-180-300K) and the almost linear increase above 300 K (Q-1>300K). BothQ-180-300KandQ-1>300Kdecrease with increasing the deposition temperature, and show the mild temperature dependence ina-Si:H623K. The white light soaking with 100 mW/cm2(WLS100and so on) below 300 K caused a change inQ-180-300Kand no changes inQ-1>300K, respectively, and the light-induced changes inQ-180-300Krecovered after annealing at 423 K. The wide distribution of activation energies for H2motions between microvoids indicate that most of neighboring microvoids are connected through windows, i.e., the microvoid networks are existing ina-Si:H, and the spatially loose or solid structures are responsible for the low or high activation energies for the H2motion between microvoids, respectively. Furthermore, the light-induced hydrogen evolution (LIHE) was observed for WLS200to WLS400in a vacuum between 400 and 500 K, resulting in the disappearance of the internal friction due to the H2motion in the microvoid network.


1977 ◽  
Vol 55 (13) ◽  
pp. 2499-2503 ◽  
Author(s):  
Mark Salomon

The complex solubilities of AgCl, AgBr, and AgI have been measured in several mixed solvents containing propylene carbonate and bis(trifluoroethyl)sulfite. The results indicate that a large inductive effect destabilizes the solvation of silver ions whereas the halide ions appear to be stabilized by coordination with the sulfinyl sulfur. Several physio-chemical properties of pure bis(trifluoroethyl)sulfite are reported.


Sign in / Sign up

Export Citation Format

Share Document