Matrix-addressable, active electrode arrays for neural stimulation using organic semiconductors—cytotoxicity and pilot experimentsin vivo

2007 ◽  
Vol 5 (1) ◽  
pp. 68-74 ◽  
Author(s):  
Dara Feili ◽  
Martin Schuettler ◽  
Thomas Stieglitz
2015 ◽  
Vol 17 (6) ◽  
Author(s):  
Vasiliki Giagka ◽  
Andreas Demosthenous ◽  
Nick Donaldson

2021 ◽  
Vol 23 (1) ◽  
pp. 351
Author(s):  
Jae Sik Kim ◽  
Seong Woo Choi ◽  
Yun-Gwi Park ◽  
Sung Joon Kim ◽  
Chang Heon Choi ◽  
...  

Cardiac radioablation is emerging as an alternative option for refractory ventricular arrhythmias. However, the immediate acute effect of high-dose irradiation on human cardiomyocytes remains poorly known. We measured the electrical activities of human induced pluripotent stem cell-derived cardiomyocytes (iPSC-CMs) upon irradiation with 0, 20, 25, 30, 40, and 50 Gy using a multi-electrode array, and cardiomyocyte function gene levels were evaluated. iPSC-CMs showed to recover their electrophysiological activities (total active electrode, spike amplitude and slope, and corrected field potential duration) within 3–6 h from the acute effects of high-dose irradiation. The beat rate immediately increased until 3 h after irradiation, but it steadily decreased afterward. Conduction velocity slowed in cells irradiated with ≥25 Gy until 6–12 h and recovered within 24 h; notably, 20 and 25 Gy-treated groups showed subsequent continuous increase. At day 7 post-irradiation, except for cTnT, cardiomyocyte function gene levels increased with increasing irradiation dose, but uniquely peaked at 25–30 Gy. Altogether, high-dose irradiation immediately and reversibly modifies the electrical conduction of cardiomyocytes. Thus, compensatory mechanisms at the cellular level may be activated after the high-dose irradiation acute effects, thereby, contributing to the immediate antiarrhythmic outcome of cardiac radioablation for refractory ventricular arrhythmias.


2021 ◽  
pp. 108425
Author(s):  
Daniele De Seta ◽  
Hannah Daoudi ◽  
Renato Torres ◽  
Evelyne Ferrary ◽  
Olivier Sterkers ◽  
...  

Lab on a Chip ◽  
2012 ◽  
Vol 12 (21) ◽  
pp. 4397 ◽  
Author(s):  
Dries Braeken ◽  
Danny Jans ◽  
Roeland Huys ◽  
Andim Stassen ◽  
Nadine Collaert ◽  
...  

Author(s):  
Mathieu Vanden Bulcke ◽  
Kris Baert ◽  
Eric Beyne ◽  
Mario Gonzalez ◽  
Christophe Winters ◽  
...  

ACS Nano ◽  
2018 ◽  
Vol 12 (1) ◽  
pp. 148-157 ◽  
Author(s):  
Dong-Wook Park ◽  
Jared P. Ness ◽  
Sarah K. Brodnick ◽  
Corinne Esquibel ◽  
Joseph Novello ◽  
...  

2021 ◽  
Vol 7 (2) ◽  
pp. 359-362
Author(s):  
Lena Hegel ◽  
Andrea Kauth ◽  
Karsten Seidl ◽  
Sven Ingebrandt

Abstract Flexible Multi Electrode Arrays (MEAs) for neural interfacing reduce the mechanical mismatch between the soft brain tissue and the electrode arrays allowing accurate signal recordings and neural stimulation while reducing inflammatory responses. Many standard manufacturing processes of MEAs are designed for planar structures and the production of three-dimensional structures is challenging. In the present study, shaft structures with one to two circular gold microelectrodes (10 - 20 μm), each on a base polyimide (PI) substrate, were investigated. We describe a fabrication method, with which shafts made from bi-layer PI flip into the third dimension, which is a first step towards spontaneous assembly of electrodes in flexible 3D MEAs for neuroelectronic applications. A lift-up of the shafts was achieved by the contraction of a second PI layer and a steady nitrogen flow during polycondensation. This shrinking PI was structured in pits with a width of 5 - 600 μm. We achieved liftup angles of up to 42 degrees. The shaft structures can be hardened and later be used for neural implantation experiments.


Author(s):  
Mathieu Vanden Bulcke ◽  
Kris Baert ◽  
Eric Beyne ◽  
Mario Gonzalez ◽  
Christophe Winters ◽  
...  

2016 ◽  
Vol 2 (1) ◽  
pp. 83-86
Author(s):  
Martin Deckert ◽  
Michael Lippert ◽  
Kentaroh Takagaki ◽  
Andreas Brose ◽  
Frank Ohl ◽  
...  

AbstractThe microfabrication and packaging of novel, three-dimensional, polyimide-based, highly flexible, microscale electrocorticography multi-electrode arrays for enhanced epicortical recording of local field potentials is presented. A polyimide foil embeds metallic structures relating to 32 taper-type electrode sites, contact pads as well as interconnecting conductor paths which are integrated in the planar portion of the electrode substrate material. Circular exposed and, thus, active electrode sites are 50 μm in diameter and employed center-to-center pitches range from 250 μm to 1 mm, respectively. As-fabricated 3D-μECoG-MEAs provide taper heights of approximately 4 μm as well as 59 μm being distinguished by characteristic impedances of about 368.9 kΩ at 1 kHz measured in saline electrolyte. The applied packaging strategies favor flip-chip bonding and vapor phase soldering of the polymer substrates to customized printed circuit boards.


Sign in / Sign up

Export Citation Format

Share Document