scholarly journals Characteristics of Cantilever Retaining Wall Composed of Upper Wall and Lower Wall by Physical Testing

2021 ◽  
Vol 2083 (2) ◽  
pp. 022063
Author(s):  
Yaming Zhang ◽  
Dongsheng Chen ◽  
Jinlong Liu ◽  
Lei Zhu
Keyword(s):  
Free Surface ◽  
Slip Surface ◽  
Lateral Displacement ◽  
Retaining Wall ◽  
Earth Pressure ◽  
Lower Wall ◽  
The Finite Element Method ◽  
Slip Surfaces ◽  
Physical Testing ◽  
Vertical Earth Pressure

Abstract Based on the finite element method, the earth pressure and deformation of the cantilever retaining wall composed of upper wall and lower wall are compared and analyzed. The results show that the maximum lateral displacement of the fill occurs near the top of the upper wall, the lower wall has the tendency of overturning to the free surface, while the upper wall has a certain deviation from the free surface. The vertical earth pressure acting on the heel plate of the upper wall and the lower wall presents non-linear characteristics. When the cantilever retaining wall composed of upper wall and lower wall is unstable, there are two slip surfaces in the filling. The first slip surface runs through the filling based on the heel plate root of the lower wall, and the second slip surface runs through the upper filling based on the heel plate root of the upper wall.

Study on the applicability of a retaining wall using batter piles in clay

2016 ◽  
Vol 53 (8) ◽  
pp. 1195-1212 ◽  
Author(s):  
Minsu Seo ◽  
Jong-Chul Im ◽  
Changyoung Kim ◽  
Jae-Won Yoo
Keyword(s):  
Lateral Displacement ◽  
Retaining Wall ◽  
Earth Pressure ◽  
Integrated System ◽  
Element Analysis ◽  
Test Execution ◽  
The Earth ◽  
National University ◽  
Clay Ground ◽  
Batter Piles

A retaining wall using batter piles has been developed and studied to improve existing earth-retaining structures at Pusan National University. The earth-retaining method is a temporary excavation method using an integrated system of front supports and batter piles. The batter piles connected to the front supports significantly reduce the earth pressure acting on the front supports by distributing it to batter piles to increase structural stability. In this study, the existence of batter piles, the fixity of the tips of front supports or batter piles, the spacing between batter piles, and the verticality of front supports are varied across model tests. The lateral displacement of the earth-retaining wall decreased by approximately 40% and 15% for the existence and fixity of batter piles, respectively. The applicability of the earth-retaining method using batter piles has been verified with finite element analysis and field test execution in clay ground.

Upper Bound Limit Analysis of Passive Earth Pressure of Cohesive Backfill on Retaining Wall

2013 ◽  
Vol 353-356 ◽  
pp. 895-900 ◽  
Author(s):  
Xin Rong Liu ◽  
Ming Xi Ou ◽  
Xin Yang
Keyword(s):  
Upper Bound ◽  
Limit Analysis ◽  
Slip Surface ◽  
Retaining Wall ◽  
Earth Pressure ◽  
Friction Angle ◽  
Cohesive Soil ◽  
Passive Earth Pressure ◽  
Simple Method ◽  
Upper Bound Limit Analysis

In view of the shortage of using classical earth pressure theories to calculating passive earth pressure of cohesive soil on retaining wall under complex conditions. Based on the planar slip surface and the back of retaining wall was inclined and rough assumption, the calculation model of passive earth pressure of cohesive backfill under uniformly distrubuted loads was presented, in which the upper bound limit analysis was adopted. Meanwhile it was proven that the prevailing classical Rankine’s earth pressure theory was a special example simlified under the condition of its assumptions. For it’s difficult to determine the angle of slip surface , a relatively simple method for calculating the angle was proposed by example. And the influence of angle of wall back , friction angle of the interface between soil and retaining wall, cohesion force and internal friction angle of backfill soil to planar sliding surface and passive earth pressure were analyzed. Some good calculation results were achieved, these analysis can provide useful reference for the design of retaining wall.

scholarly journals Calculation of Active Earth Pressure for Narrow Backfill with a Curved Slip Surface

2019 ◽  
Vol 2019 ◽  
pp. 1-10
Author(s):  
Zhihui Wang ◽  
Aixiang Wu ◽  
Yiming Wang
Keyword(s):  
Equilibrium Equation ◽  
Slip Surface ◽  
Limit Equilibrium ◽  
Retaining Wall ◽  
Earth Pressure ◽  
Failure Surface ◽  
Friction Angle ◽  
Force Balance ◽  
Vertical Force ◽  
The Earth

A method was proposed to calculate the earth pressure from a cohesionless backfill with a high aspect ratio (ratio of height to width of retaining wall). An exponential equation of slip surface was proposed first. The proposed nonlinear slip surface equation can be obtained once the width and height of the backfill as well as the internal friction angle of the backfill were given. The failure surface from the proposed formula agreed well with the experimental slip surface. Then, the earth pressure was calculated using a simplified equilibrium equation based on the proposed slip surface. It is assumed that the minor principal stress of the backfill near the wall and at its corresponding slip surface where the depth is the same is the same. Thus, based on the vertical force balance of the horizontal backfill strip, assuming the wall-soil interface and the slip surface is in the limit equilibrium state, defined by the Mohr–Coulomb criterion, the differential equilibrium equation was obtained and numerically solved. The calculated results agreed well with the test data from the published literature.

Experimental Research on Earth Pressure of Double-Sided Reinforced Earth Retaining Wall

2011 ◽  
Vol 368-373 ◽  
pp. 1572-1576
Author(s):  
Jun Su ◽  
Hong Guang Chen
Keyword(s):  
Experimental Research ◽  
Retaining Wall ◽  
Earth Pressure ◽  
Retaining Walls ◽  
Test Results ◽  
Filling Height ◽  
Reinforced Earth ◽  
Vertical Earth Pressure

According to a highway expansion project, this paper makes field obversations on earth pressrue of double-sided reinforcement retaining walls and studies distribution of it. Test results show earth pressure on the back of double-sided reinforcement retaining walls grows with increase of filling height during construction and the distribution is nonlinear along with height of the wall, the maximum is at the base. Measured values of vertical earth pressure are lower than theoretical ones. And this structure of double-sided reinforcement retaining walls has low requirement on bearing pressure of foundations. The results can be used as a reference for further application in future.

Model Test of Mechanical Characteristics of Cantilever Retaining Wall with Mutual Anchor

2011 ◽  
Vol 90-93 ◽  
pp. 508-513
Author(s):  
Hong Bo Zhang ◽  
Xiu Guang Song ◽  
Jian Hong Jiang ◽  
Ya Nan Zang ◽  
Zhi Gang Dou
Keyword(s):  
Model Test ◽  
Mechanical Characteristics ◽  
Lateral Displacement ◽  
Retaining Wall ◽  
Earth Pressure ◽  
Lateral Earth Pressure ◽  
Force Characteristics

In order to analysis force characteristics and changes of the anchor tension during the process of filling soil of the pull cantilever retaining wall, a model test is designed for research. The test mainly monitors basal earth pressure, lateral earth pressure of the retaining wall, anchor shaft force, lateral displacement of the retaining wall.

scholarly journals Ecological Retaining Wall for High-Steep Slopes: A Case Study in the Ji-Lai Expressway, Eastern China

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Peng Jiang ◽  
Jin Li ◽  
Shen Zuo ◽  
Xin Zhuang Cui
Keyword(s):  
Field Experiments ◽  
Lateral Displacement ◽  
Retaining Wall ◽  
Eastern China ◽  
Earth Pressure ◽  
Horizontal Displacement ◽  
Steep Slope ◽  
Protection Scheme ◽  
Steep Slopes

Research on the retaining structures for high-steep slopes is extremely significant because of its real-world applications and far-reaching implications. A flexible geocell-reinforced ecological retaining wall as a high-steep slope protection scheme was developed and applied to the slope protection project of the Ji-Lai Expressway by analyzing the reinforcement mechanism of the geocell used. The lateral displacement and Earth pressure distribution on the flexible ecological retaining wall applied to the high-steep slope were studied using finite element numerical simulations and verified using field experiments. Results reveal that the wall maximum horizontal displacement is 2/3 H away from the wall toe because of the replacement of the upper part of soil. There is an obvious bucking effect on the active Earth pressure around the stiffened site, and the flexible deformation of the retaining wall helped effectively release some of the Earth pressure. Consequently, the measured value is lower than the theoretical value. Through this case study, it is demonstrated that the flexible ecological retaining wall as a slope protection technology can be successfully applied to steep slopes with a height of more than 15 m. Moreover, it brings significant advantages for protecting the ecological environment and improving the highway landscape.

Soil Pressure Test and Numerical Analysis on Reinforced Earth Retaining Wall of Green Gabion

2014 ◽  
Vol 644-650 ◽  
pp. 5039-5045
Author(s):  
Xiao Yang ◽  
Guo Lin Yang
Keyword(s):  
Numerical Analysis ◽  
Field Test ◽  
Retaining Wall ◽  
Earth Pressure ◽  
Wall Surface ◽  
Soil Pressure ◽  
Reinforced Earth ◽  
Earth Pressures ◽  
Flexible Wall ◽  
Vertical Earth Pressure

Based on reinforced earth retaining wall of green gabion which is built at the site of seventh project Shaoxing-Zhuji Expressway, the research for soil pressure in a cross section which locate at the site of K38+398kmare made by field test and numerical analysis. The horizontal and vertical earth pressure are studied in the construction, The pressures between field test and numerical analysis which depend on FLAC3D are rough similar. With increased of height in filling soil, the earth pressures on the wall toe in 3 direction such as horizon , vertical, 45°are increased ,and then gradually come to stability after construction. With increased of height in filling soil, the vertical earth pressures is increased, but the distribution for earth pressure at the same height is non-uniform. The horizontal earth pressure on the back of wall surface increases fast at first then decreases a little, which is a single peak-shaped, it distributes along the wall height in non-linear form, the maximum occurs at 1/3H. The result between field test and numerical model are different, because the flexible wall surface has a great affection on unload.

Study of Seismic Design Method for Slope Supporting Structure of Soil Nailing

2013 ◽  
Vol 353-356 ◽  
pp. 2073-2078
Author(s):  
Tian Zhong Ma ◽  
Yan Peng Zhu ◽  
Chun Jing Lai ◽  
De Ju Meng
Keyword(s):  
Seismic Design ◽  
Calculation Method ◽  
Retaining Wall ◽  
Earth Pressure ◽  
Calculation Model ◽  
Soil Nailing ◽  
Case Record ◽  
Analysis And Design ◽  
Supporting Structure ◽  
Earthquake Action

Slope anchorage structure of soil nail is a kind of economic and effective flexible slope supporting structure. This structure at present is widely used in China. The supporting structure belong to permanent slope anchorage structure, so the design must consider earthquake action. Its methods of dynamical analysis and seismic design can not be found for the time being. The seismic design theory and method of traditional rigidity retaining wall have not competent for this new type of flexible supporting structure analysis and design. Because the acceleration along the slope height has amplification effect under horizontal earthquake action, errors should be induced in calculating earthquake earth pressure using the constant acceleration along the slope height. Considering the linear change of the acceleration along the slope height and unstable soil with the fortification intensity the influence of the peak acceleration, the earthquake earth pressure calculation formula is deduced. The soil nailing slope anchorage structure seismic dynamic calculation model is established and the analytical solutions are obtained. The seismic design and calculation method are given. Finally this method is applied to a case record for illustration of its capability. The results show that soil nailing slope anchorage structure has good aseismic performance, the calculation method of soil nailing slope anchorage structure seismic design is simple, practical, effective. The calculation model provides theory basis for the soil nailing slope anchorage structure of seismic design. Key words: soil nailing; slope; earthquake action; seismic design;

scholarly journals Landslide geometry and activity in Villa de la Independencia (Bolivia) revealed by InSAR and seismic noise measurements

Landslides ◽  
2021 ◽  
Author(s):  
Chuang Song ◽  
Chen Yu ◽  
Zhenhong Li ◽  
Veronica Pazzi ◽  
Matteo Del Soldato ◽  
...  
Keyword(s):  
Time Series ◽  
Seismic Noise ◽  
Slip Surface ◽  
Inversion Method ◽  
Subsurface Structures ◽  
Slip Surfaces ◽  
Landslide Volume ◽  
Noise Measurements ◽  
Landslide Body

AbstractInterferometric Synthetic Aperture Radar (InSAR) enables detailed investigation of surface landslide movements, but it cannot provide information about subsurface structures. In this work, InSAR measurements were integrated with seismic noise in situ measurements to analyse both the surface and subsurface characteristics of a complex slow-moving landslide exhibiting multiple failure surfaces. The landslide body involves a town of around 6000 inhabitants, Villa de la Independencia (Bolivia), where extensive damages to buildings have been observed. To investigate the spatial-temporal characteristics of the landslide motion, Sentinel-1 displacement time series from October 2014 to December 2019 were produced. A new geometric inversion method is proposed to determine the best-fit sliding direction and inclination of the landslide. Our results indicate that the landslide is featured by a compound movement where three different blocks slide. This is further evidenced by seismic noise measurements which identified that the different dynamic characteristics of the three sub-blocks were possibly due to the different properties of shallow and deep slip surfaces. Determination of the slip surface depths allows for estimating the overall landslide volume (9.18 · 107 m3). Furthermore, Sentinel-1 time series show that the landslide movements manifest substantial accelerations in early 2018 and 2019, coinciding with increased precipitations in the late rainy season which are identified as the most likely triggers of the observed accelerations. This study showcases  the potential of integrating InSAR and seismic noise techniques to understand the landslide mechanism from ground to subsurface.

Sign in / Sign up

Export Citation Format

Share Document