scholarly journals Investigating the effects of a non - uniform magnetic field on heat and flow characteristics of a ferrofluid

2021 ◽  
Vol 2116 (1) ◽  
pp. 012035
Author(s):  
Shubham Dalvi ◽  
Theo H. Van Der Meer ◽  
Mina Shahi
Keyword(s):  
Magnetic Field ◽  
Uniform Magnetic Field ◽  
Numerical Study ◽  
Flow Characteristics ◽  
Flow Distribution ◽  
Heat Transfer Mechanism ◽  
Field Equations ◽  
Circular Annulus ◽  
Energy Equations ◽  
A Current

Abstract A numerical study is performed to investigate the effect of a non - uniform magnetic field from a current carrying wire on the ferrofluid flow. The analysis is carried out for a semi circular annulus with three different locations of wire relative to it, by solving coupled set of flow field equations, energy equations and the Maxwell’s magnetostatics equations. Results from the present study offers better insight about the ferrofluid behaviour and heat transfer mechanism. It also explains the dependency of flow distribution on the location of the electric wire and the magnitude of current flowing through it.

Circulation control in magnetohydrodynamic rotating flows

2017 ◽  
Vol 829 ◽  
pp. 328-344 ◽  
Author(s):  
V. D. Borisevich ◽  
E. P. Potanin ◽  
J. Whichello
Keyword(s):  
Magnetic Field ◽  
Boundary Layer ◽  
Exact Analytical Solution ◽  
External Rotation ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Rotating Cylinder ◽  
Rotating Disc ◽  
Angular Velocities ◽  
Energy Equations

A model of a laminar viscous conducting flow, near a dielectric disc in a uniform magnetic field and in the presence of external rotation, is considered, where there is a uniform suction and an axial temperature gradient between the flow and the disc’s surface. It is assumed that the parameters of the suction or the magnetohydrodynamic (MHD) interaction are such that the nonlinear inertial terms, related to the circulation flow, are negligible in the differential equations of the MHD boundary layer on a rotating disc. Analysis of the motion and energy equations, taking the dependence of density on temperature into account, is carried out using the Dorodnitsyn transformation. The exact analytical solution for the boundary layer and heat transfer equations is obtained and analysed, neglecting the viscous and Joule dissipation. The dependence of the flow characteristics in the boundary layer on the rate of suction and the magnetic field induction is studied. It is shown that the direction of the radial flow in the boundary layer on a disc can be changed, not only by variation of the ratio between the angular velocities in the external flow and the boundary layer, but also by changing the ratio of the temperatures in these two flows, as well as by varying the hydrodynamic Prandtl number. The approximate calculation of a three-dimensional flow in a rotating cylinder with a braking disc (or lid) is carried out, demonstrating that a magnetic field slows the circulation velocity in a rotating cylinder.

scholarly journals Numerical Study of Bleed Slot Flow Characteristics Using Magneto-Aerodynamics

2021 ◽  
Author(s):  
Szym on Buhajczuk
Keyword(s):  
Magnetic Field ◽  
Boundary Layer ◽  
High Speed ◽  
Numerical Study ◽  
Flow Characteristics ◽  
Past Research ◽  
Charge Generation ◽  
High Speed Engine ◽  
Displacement Thickness ◽  
Sonic Flow

A numerical study into magneto-aerodynamic bleed control systems has been undertaken with the intent of improving the shock swallowing ability of high speed engine intakes. Past research has shown that bleed slots effectively remove sufficient mass flow of air from the system to permit shocks to be swallowed. A magnetic field's influence on a charged boundary layer creates a possibility of sealing a bleed slot when not needed. 2D bleed slots were modeled using structured grids for use with the FLUENT CFD solver. User defined functions were written to simulate charge generation and magnetic field forces. Solutions revealed that bleed slot angles, free stream Mach numbers, pressure ratios, boundary layer displacement thickness, field strength and field position all affect how the system performs. Results have shown that a properly positioned magnetic field can reduce sonic flow coefficients up to 88%, thus justifying further research and investment in wind tunnel experiments.

Flow Characteristics in a Three-Dimensional Rectangular Channel With a Pair of Ribs Placed Symmetrically at the Channel Walls

2000 ◽  
Author(s):  
M. Singh ◽  
P. K. Panigrahi ◽  
G. Biswas
Keyword(s):  
Heat Transfer ◽  
Large Scale ◽  
Numerical Study ◽  
Rectangular Channel ◽  
Turbine Blades ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Navier Stokes ◽  
Complex Flow ◽  
Energy Equations

Abstract A numerical study of rib augmented cooling of turbine blades is reported in this paper. The time-dependent velocity field around a pair of symmetrically placed ribs on the walls of a three-dimensional rectangular channel was studied by use of a modified version of Marker-And-Cell algorithm to solve the unsteady incompressible Navier-Stokes and energy equations. The flow structures are presented with the help of instantaneous velocity vector and vorticity fields, FFT and time averaged and rms values of components of velocity. The spanwise averaged Nusselt number is found to increase at the locations of reattachment. The numerical results are compared with available numerical and experimental results. The presence of ribs leads to complex flow fields with regions of flow separation before and after the ribs. Each interruption in the flow field due to the surface mounted rib enables the velocity distribution to be more homogeneous and a new boundary layer starts developing downstream of the rib. The heat transfer is primarily enhanced due to the decrease in the thermal resistance owing to the thinner boundary layers on the interrupted surfaces. Another reason for heat transfer enhancement can be attributed to the mixing induced by large-scale structures present downstream of the separation point.

Computational investigation of non-uniform magnetic field on thermal characteristic of nanofluid stream inside 180∘ elbow pipe

2021 ◽  
pp. 2150157
Author(s):  
Yu-Ming Chu ◽  
Rasoul Moradi ◽  
Amir Musa Abazari
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Average Nusselt Number ◽  
Uniform Magnetic Field ◽  
Thermal Characteristic ◽  
Flow Characteristics ◽  
Heat Rate ◽  
Magnetic Intensity ◽  
Computational Investigation ◽  
Major Focus

The thermal efficiency of the heat exchanger is substantial in chemical and mechanical systems. The presence of the non-homogeny magnetic field considerably enhances the heat rate of nanofluid stream. In this exploration, the presence of the non-uniform magnetic intensity on the heat rate of nanofluid stream is noted inside the 180[Formula: see text] elbow pipe. FVM is used to model the flow characteristics and temperature distribution through the 180[Formula: see text] elbow pipe. Our major focus is to demonstrate the main influences of the non-uniform FHD on flow stream and heat transfer of nanofluid in various inlet velocities and magnetic intensities. Achieved outcomes display that growing the magnetic intensity from 1e + 6 to 4e + 6 enhances the average Nusselt number about 30%. Our findings show that increasing the inlet velocity to Re = 100 decreases the magnetic effects about 17% on the heat transfer growth.

Construction of a Cost Effective Current Balance for Physics Teaching

2013 ◽  
Vol 770 ◽  
pp. 374-377
Author(s):  
Apichart Sankote ◽  
Kheamrutai Thamaphat ◽  
Supanee Limsuwan
Keyword(s):  
Magnetic Field ◽  
Uniform Magnetic Field ◽  
Magnetic Force ◽  
Magnetic Field Direction ◽  
Horizontal Segment ◽  
Applied Current ◽  
Copper Sheet ◽  
Physics Teaching ◽  
The Magnetic Field ◽  
A Current

In this work, a method to measuring the magnitude of a uniform magnetic field in space using current balance was described. A simple experimental set was designed and constructed using low-cost materials. This constructed current balance consists of copper sheet, weight pan, and acrylic sheet. A copper sheet was cut into a U-shape and attached at the end of acrylic balance arm. A weight pan was hanged in the opposite side of the balance arm with high sensitivity to a small torque. The horizontal segment of the U-shaped copper sheet, which the length l was 3 cm, was located inside the influence of an uniform magnetic field produced by two parallel bar magnets with opposite poles facing each other. The magnetic field direction was perpendicular to the horizontal segment. When a current was supplied to the copper sheet, the magnetic force acting on a horizontal segment of length l carrying a current I in a magnetic field B was given by. In the experiment, the current was varied from 0 1 A. For each value of applied current, the magnetic force on a thin straight sheet of length l was measured by adding masses to the pan until the balance arm moved to the equilibrium between opposing gravitational and magnetic forces. The results showed that the magnetic force increased linearly with increasing applied current. By plotting a linear graph of magnetic force versus applied current, the magnetic field B can be calculated from . The calculated and actual values of B were 100.32 and 100.13 mT, respectively. This constructed current balance is an excellent tool for high school and undergraduate fundamental physics courses. Students will be excited when they see the balance arm rising or going down due to magnitude and direction of current flowing in a conductor wire.

Sign in / Sign up

Export Citation Format

Share Document