scholarly journals An ecological sediment treatment technology based on zero emission and 4R concept

Author(s):  
J Liu ◽  
X X Wang ◽  
N She ◽  
L Y Wu ◽  
Z W Bu
Author(s):  
N. S. Tsarev ◽  
V. I. Aksenov ◽  
I. I. Nichkova

To neutralize the waste pickling solutions and rinsing water, resulting from cleaning metal products s surface of rust by acids solutions, lime is used. Being cheap, this method of sewage neutralization has considerable drawbacks. Forming in the technological pipes strong gypsum depositions and low specific productivity of the equipment for sediment dewatering are most significant of them. Characteristic of aggressive industrial sewage, formed at pickling of ferrous metals presented. Methods of elimination of drawbacks of industrial sewage neutralization by lime considered, including stabilization of neutralized industrial sewage and control of properties of the sediment formed. It was noted, that stability of the circulating water can be provided by accelerating of crystallization of the forming gypsum sediments by introducing in it fine priming powder and heating the neutralized water up to 65-70 °С followed by thermal softening of a part of circulating water, removed out of the circulating system. It was shown, that the heating of the water and the ongoing changes of the composition and properties of the sediment result in decrease of filtration resistance 2-3 folds, increase of deposition speed 3-4 folds and decrease the sediment volume 1.5-2 folds comparing with lime neutralization in cold water. Calculated dozes of lime at the heating were taken the same as at the regular lime neutralization. Elimination of the circulating water oversaturation by bi-water gypsum can be reached also by addition into the water of powder-like gypsum pulp - priming powder for microcrystals of the gypsum, followed by aeration during 30-40 min. This method was tested under industrial conditions. Technological properties of the forming sediment can be improved by sediment treatment by flocculants and preliminary heating of the neutralized water up to 65-70 °С. Control of technological properties of the sediment is done by addition of flocculants and heating of the neutralized water. Recommendations for improving operation of the neutralization facilities presented with indicating particular technological parameters of the equipment operation for sewage and sediment treatment. 


2018 ◽  
Vol 6 (3) ◽  
Author(s):  
Arie Herlambang

Clean water to poor communities who live in crowded municipal area is stillexpensive and a luxury. This condition is evidenced by the number of people whouse ground water for their daily water, because water taps still seems expensivefor them. Diarrheal disease is still relatively high for Indonesia, where nearly 16thousand people suffer from diarrhea due to poor sanitation. To help the poor inthe city, there are several alternative technologies that can be applied to publicaccess to clean water and adequate low-cost, including ground water treatmenttechnology with a filter system equipped with an ultraviolet sterilizer, or ozonegenerators, or using ultrafiltration, if possible can also use the reverse osmosismembrane that for fresh water. Arsinum is the best alternative should be chosenfor fulfilled potable water in slump area.Keywords : Sanitation, water treatment technology, portable water, low-cost, slump area


2018 ◽  
Vol 6 (1) ◽  
Author(s):  
Arie Herlambang

In the event of natural disasters such as earthquakes, tsunamis, landslides, floods and droughts, water occupies a key role in disaster relief. The presence of water is important for drinking, cooking and support the refugee areas of environmental sanitation and avoiding disaster victims of diseases waterborn disease. Water problem in disaster conditions may occur partly as a result: the disturbance of water sources because change of water quality, to become turbid or salty, the destruction of a piping system, treatment plant damage, disruption of distribution systems, or the scarcity of water in evacuation areas. Introduction of water quality becomes important to determine which process technology will be used and saved investments in emergency conditions. Priority handling of clean water usually comes first in the refugee areas with communal system, because the need of water for bathing, washing and toilet is big enough, while for a drink in the early events during disaster dominated by bottled water, but for their long-term, they have to boil water. For remote areas and difficult to reach individuals who usually use  system more simple and easily operated. Water Supply Technology for emergency response has the characteristic 1). Able to operate with all sorts of water conditions (flexible adaptable), 2). Can be operated easily, 3). Does not require much maintenance, 4). Little use of chemicals, and 5). Portable and easy removable (Mobile System). Keywords :  Water Quality, Water Treatment Technology, Drinking Water, Emergency Response, filtration, ceramic filtration, Ultra filtration, Reverse Osmosis, Ultraviolet Sterilizer, Ozonizer, Disinfection.


Sign in / Sign up

Export Citation Format

Share Document