scholarly journals Advantages of underground coal gasification implementation in Indonesia

2021 ◽  
Vol 882 (1) ◽  
pp. 012053
Author(s):  
M Huda ◽  
B Yunianto ◽  
B Sirait ◽  
S Salinita ◽  
D Shaigec
Keyword(s):  
Natural Gas ◽  
Coal Gasification ◽  
Oil And Gas ◽  
High Energy ◽  
Gas Production ◽  
High Energy Density ◽  
Regulatory Regime ◽  
Underground Coal Gasification ◽  
Coal Quality ◽  
Gas Drilling

Abstract Underground Coal Gasification (UCG) is an energy manufacturing process whereby coal is gasified or chemically converted into a gas, in-situ. UCG has several benefits in terms of low capital cost, lower environmental impact, high energy density and long-term production certaint y. The objective of this study is to describe the advantages of implementing UCG technology in Indonesia based on UCG gas resources, product market, coal quality and availability of regulation to support UCG projects. UCG gas resources are estimated based on data of CBM resource and coal quality was examined by heat treatment. The size of conservatively estimated potential UCG gas manufacturing volume in Indonesia based on CBM data is 160 TCF which is greater than Indonesia’s natural gas reserves, namely 142.7 TCF. UCG gas markets are available in South Sumatera and East Kalimantan since the natural gas production in the two provinces is declining significantly. UCG in Indonesia is regulated under the mineral and coal regulatory regime, which brings some benefits, including more flexibility in the type of drilling rigs that can be used for UCG, compared to oil and gas drilling.

Chemical Deliquification of Unconventional Gas Wells

2014 ◽  
Author(s):  
K.. Francis-LaCroix ◽  
D.. Seetaram
Keyword(s):  
Natural Gas ◽  
Best Practice ◽  
Oil And Gas ◽  
Large Deviation ◽  
Cost Effective ◽  
Gas Production ◽  
Lessons Learned ◽  
Offshore Platforms ◽  
Gas Wells ◽  
Current Production

Abstract Trinidad and Tobago offshore platforms have been producing oil and natural gas for over a century. Current production of over 1500 Bcf of natural gas per year (Administration, 2013) is due to extensive reserves in oil and gas. More than eighteen of these wells are high-producing wells, producing in excess of 150 MMcf per day. Due to their large production rates, these wells utilize unconventionally large tubulars 5- and 7-in. Furthermore, as is inherent with producing gas, there are many challenges with the production. One major challenge occurs when wells become liquid loaded. As gas wells age, they produce more liquids, namely brine and condensate. Depending on flow conditions, the produced liquids can accumulate and induce a hydrostatic head pressure that is too high to be overcome by the flowing gas rates. Applying surfactants that generate foam can facilitate the unloading of these wells and restore gas production. Although the foaming process is very cost effective, its application to high-producing gas wells in Trinidad has always been problematic for the following reasons: Some of these producers are horizontal wells, or wells with large deviation angles.They were completed without pre-installed capillary strings.They are completed with large tubing diameters (5.75 in., 7 in.). Recognizing that the above three factors posed challenges to successful foam applications, major emphasis and research was directed toward this endeavor to realize the buried revenue, i.e., the recovery of the well's potential to produce natural gas. This research can also lead to the application of learnings from the first success to develop treatment for additional wells, which translates to a revenue boost to the client and the Trinidad economy. Successful treatments can also be used as correlations to establish an industry best practice for the treatment of similarly completed wells. This paper will highlight the successes realized from the treatment of three wells. It will also highlight the anomalies encountered during the treatment process, as well as the lessons learned from this treatment.

scholarly journals The Role of Enhanced Shale Oil & Gas Recovery in the Us & Development & Pricing of Significant Potential Shale Production in Other Countries Such As South America, Canada, & Europe/Asia2018/2019

2019 ◽  
Vol 2 (3) ◽  
Keyword(s):  
Natural Gas ◽  
Oil And Gas ◽  
The United States ◽  
Gas Production ◽  
Domestic Water ◽  
Water Supplies ◽  
Hydro Power ◽  
Gas Treatment ◽  
Environmentally Sound

The Role of Science in Developing Enhanced Oil & Gas Resources, Being Environmentally Sound, & Protecting Water Use • Global transformation with fossil fuel as primary source which have an effect on GDP, export/import changes, and global effects on pricing • History of evolution of oil and gas production in the United States • Global development: European Community, India, China, Brazil, Chile, Argentina and Mexico all have proven reserves • All time high extraction of tight natural gas and oil being environmentally sound and protecting domestic water supplies • Hydraulic fracking below potable water supplies • Drilling Diagrams – Vertical and Horizontal, Proper Casing  Record pace of pipeline construction to supply refineries & terminal ports  Pronounced effect on GDP • Natural gas treatment, delivery, from source to energy deficient countries exported as LNG • Cost subsidies and economic pricing of oil and gas extraction, hydro power, coal, nuclear, wind, and solar. Cost of power by region • There are no “Dry Holes” and more attributes of highly advanced geological technology

Distribution and estimates of Australia's identified energy commodity resources

2021 ◽  
Vol 61 (2) ◽  
pp. 325
Author(s):  
Barry E. Bradshaw ◽  
Meredith L. Orr ◽  
Tom Bernecker
Keyword(s):  
Natural Gas ◽  
Carbon Capture ◽  
Coal Gasification ◽  
Carbon Capture And Storage ◽  
Energy Resource ◽  
Gas Production ◽  
Renewable Energy Resources ◽  
North West ◽  
The North ◽  
Energy Provider

Australia is endowed with abundant, high-quality energy commodity resources, which provide reliable energy for domestic use and underpin our status as a major global energy provider. Australia has the world’s largest economic uranium resources, the third largest coal resources and substantial conventional and unconventional natural gas resources. Since 2015, Australia’s gas production has grown rapidly. This growth has been driven by a series of new liquefied natural gas (LNG) projects on the North West Shelf, together with established coal seam gas projects in Queensland. Results from Geoscience Australia’s 2021 edition of Australia’s energy commodity resources assessment highlight Australia’s endowment with abundant and widely distributed energy commodity resources. Knowledge of Australia’s existing and untapped energy resource potential provides industry and policy makers with a trusted source of data to compare and understand the value of these key energy commodities to domestic and world markets. A key component of Australia’s low emissions future will be the development of a hydrogen industry, with hydrogen being produced either through electrolysis of water using renewable energy resources (‘green’ hydrogen), or manufactured from natural gas or coal gasification, with carbon capture and storage of the co-produced carbon dioxide (‘blue’ hydrogen). Australia’s endowment with abundant natural gas resources will be a key enabler for our transition to a low emissions future through providing economically competitive feedstock for ‘blue’ hydrogen.

Failures of the High Energy, High Pitch Velocity Gear Boxes

2004 ◽  
Author(s):  
Steve Ingistov
Keyword(s):  
High Speed ◽  
Oil And Gas ◽  
High Energy ◽  
Gas Production ◽  
High Pitch ◽  
Oil And Gas Production ◽  
Mean Time Between Failures ◽  
Gear Teeth ◽  
Root Cause ◽  
Gas Compression

This Paper describes the on-going efforts of finding the root-cause for the failures of high-energy (over 30,000 HP), high-pitch velocity (over 30,000 FPM) gear elements. These gear elements are presently operating in Oil and Gas Production Facilities. They are installed between the GT drivers and turbo-compressors. Turbo-compressors deliver high-pressure gas into the underground oil fields to enhance the oil production. The oldest Gas Compression Units were commissioned in 1995 and the latest in 1998. Since installation in 1995 at least 6 gear boxes experienced failures of the pinion (high speed gear) teeth. The Mean Time Between Failures (MTBF) of the pinion teeth was estimated around 34,000 operating hours. The costly shutdown of Gas Compression Units forced the management to seek advice within the company. The intent of this Paper is to share some field experiences and to present some corrective actions. The intent of this Paper is also to help Original Equipment Manufacturers (OEMs) in this case gear elements Manufacturers to develop better balance between cost, life and reliability. Sometimes the balance between these three parameters is difficult to maintain. Too often the gear elements Manufacturers are forced to compete on the price basis and as result the quality of the gear elements are sometimes compromised. In addition, several well-known gear elements Manufacturers stopped offering high energy, high-pitch velocity gear elements because they suffered serious failures of the gear elements on the test stand and also in the field.

Sign in / Sign up

Export Citation Format

Share Document