scholarly journals Experimental Analysis on The Tensile Strength of Polyester Resin based Calcium Carbonate Powder and E-Glass Fibre Reinforced Composite

2019 ◽  
Vol 546 ◽  
pp. 042046
Author(s):  
S T Wicaksono ◽  
Hosta Ardhyananta ◽  
M B Waluyo
Keyword(s):  
Tensile Strength ◽  
Calcium Carbonate ◽  
Glass Fibre ◽  
Experimental Analysis ◽  
Polyester Resin ◽  
Reinforced Composite ◽  
Glass Fibre Reinforced

Mechanical behaviour of glass fibre reinforced composite at varying strain rates

2017 ◽  
Vol 4 (3) ◽  
pp. 035303 ◽  
Author(s):  
Saikat Acharya ◽  
D K Mondal ◽  
K S Ghosh ◽  
A K Mukhopadhyay
Keyword(s):  
Glass Fibre ◽  
Mechanical Behaviour ◽  
Strain Rates ◽  
Reinforced Composite ◽  
Glass Fibre Reinforced

Quasi-Static Indentation Behaviour of Glass Fibre Reinforced Polymer

2014 ◽  
Vol 970 ◽  
pp. 317-319 ◽  
Author(s):  
Syed Mohd Saiful Azwan ◽  
Yahya Mohd Yazid ◽  
Ayob Amran ◽  
Behzad Abdi
Keyword(s):  
Glass Fibre ◽  
Polyester Resin ◽  
Loading Rates ◽  
Reinforced Polymer ◽  
Glass Fibre Reinforced Polymer ◽  
Static Indentation ◽  
Indentation Tests ◽  
Fibre Reinforced Polymer ◽  
Glass Fibre Reinforced ◽  
Chopped Strand Mat

Fibre reinforced polymer (FRP) plates subject to quasi-static indentation loading were studied. The plates were fabricated from three layers of chopped strand mat glass fibre and polyester resin using vacuum infusion process. Indentation tests were conducted on the plates with loading rates of 1 mm/min, 10 mm/min, 100 mm/min and 500 mm/min using a hemispherical tip indenter with diameter 12.5 mm. The plates were clamped in a square fixture with an unsupported space of 100 mm × 100 mm. The loads and deflections at the indented location were measured to give energy absorption-deflection curves. The results showed that the loading rate has a large effect on the indentation behaviour and energy absorbed.

scholarly journals Intensity of artefacts in cone beam CT examinations caused by titanium and glass fibre-reinforced composite implants

2019 ◽  
Vol 48 (2) ◽  
pp. 20170471 ◽  
Author(s):  
Niina Kuusisto ◽  
Sisko Huumonen ◽  
Antti Kotiaho ◽  
Marianne Haapea ◽  
Jami Rekola ◽  
...  
Keyword(s):  
Glass Fibre ◽  
Cone Beam Ct ◽  
Cone Beam ◽  
Reinforced Composite ◽  
Glass Fibre Reinforced

Effect of the Gel Coat Composition on the Tensile Strength for Glass Fibre Reinforced Polyester Composites

2015 ◽  
Vol 1125 ◽  
pp. 79-83 ◽  
Author(s):  
Ahmad ◽  
M.R. Abdullah ◽  
Ab. Saman Abd Kadir
Keyword(s):  
Tensile Strength ◽  
Comparative Analysis ◽  
Glass Fibre ◽  
Gfrp Composites ◽  
Composite Surface ◽  
A Value ◽  
Before And After ◽  
Glass Fibre Reinforced ◽  
Polyester Composites ◽  
The Difference

In this study, the effect of the gel coat composition on tensile strength of glass fibre reinforced polyester (GFRP) composites was evaluated. The experiments were conducted on various gel coat composition and time. Samples were immersed in sea and river water for 6 months to investigate the differences in tensile strength. Optical observation using SEM on the composites surface and comparative analysis in terms of tensile strength were used before and after immersing. As results, the most excellent tensile strength was the gel coat composition consisting of 0.3 kg of reolosil QS-102 with 10 kg of resin SHCP 268BQTN with a value of 51.9 MPa. Tensile strength reduced about 33.4 % compared to other sample where reduced to 46.3401 %. The difference in the composite surface as a result of immersion process on each sample was also discussed in this paper.

Sign in / Sign up

Export Citation Format

Share Document