scholarly journals X-type vortex and its effect on beam shaping

2021 ◽  
Author(s):  
Xiaoyan Pang ◽  
Weiwei Xiao ◽  
Han Zhang ◽  
Chen Feng ◽  
Xinying Zhao
Keyword(s):  
Three Dimensional ◽  
Beam Shaping ◽  
Optical Fields ◽  
Intensity Pattern ◽  
Phase Gradient ◽  
Rotation Direction ◽  
3D Space ◽  
New Type ◽  
Gradient Parameter ◽  
3D Fields

Abstract In this article we propose a new type of optical vortex, the X-type vortex. This vortex inherits and develops the conventional noncanonical vortex, i.e., it no longer has a constant phase gradient around the center, while the intensity keeps invariant azimuthally. The strongly focusing properties of the Xtype vortex and its effect on the beam shaping in three-dimensional (3D) fields are analyzed. The interesting phenomena, which cannot be seen in canonical vortices, are observed, for instance the `switch effect' which shows that the intensity pattern can switch from one transverse axis to another in the focal plane by controlling the phase gradient parameter. It is shown that by adjusting the phase gradient of this vortex, the focal field can have marvelous patterns, from the doughnut shape to the shapes with different lobes, and the beam along propagation direction will form a twisting shape in 3D space with controllable rotation direction and location. The physical mechanisms underlying the rule of the beam shaping are also discussed, which generally say that the phase gradient of the X-type vortex, the orbital angular momentum, the polarization and the `nongeneric' characteristic contribute differently in shaping fields. This new type of vortex may supply a new freedom for tailoring 3D optical fields, and our work will pave a way for exploration of new vortices and their applications.

A new structure type in the hexagonal perovskite family; structure determination of the modulated misfit compound Sr9/8TiS3

2000 ◽  
Vol 56 (3) ◽  
pp. 409-418 ◽  
Author(s):  
O. Gourdon ◽  
V. Petricek ◽  
M. Evain
Keyword(s):  
Family Structure ◽  
Three Dimensional ◽  
Structure Type ◽  
X Ray ◽  
3D Space ◽  
Titanium Sulfide ◽  
New Type ◽  
New Phase ◽  
Trigonal Prismatic

Sr9/8TiS3, strontium titanium sulfide, a new phase in the hexagonal perovskite-like Sr x TiS3 system, has been prepared and its structure solved from single-crystal X-ray data within the (3 + 1)-dimensional [(3 + 1)D] formalism. Sr9/8TiS3 crystallizes with trigonal symmetry [R3¯m(00γ)0s superspace group], with the following lattice parameters: a s = 11.482 (3), c s = 2.9843 (8) Å, q = 0.56247 (7)c* and V s = 340.7 (3) Å3. The structure was considered as commensurate [R3¯c three-dimensional (3D) space group], but refined within the (3 + 1)D formalism to a residual factor R = 2.79% for 64 parameters and 1084 independent reflections. Original crenel functions were used for the sulfur and strontium description. The structure is different from that of the hexagonal perovskite-like oxide counterparts. The main difference is related to the presence of a new type of polyhedron in the [MS3] transition metal chains, intermediate between the octahedra classically found in such chains and the trigonal prismatic sites encountered in the oxides.

scholarly journals A Hierarchical Anti-Hebbian Network Model for the Formation of Spatial Cells in Three-Dimensional Space

2018 ◽  
Author(s):  
Karthik Soman ◽  
Srinivasa Chakravarthy ◽  
Michael M. Yartsev
Keyword(s):  
Network Model ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Grid Cell ◽  
Cognitive Maps ◽  
3D Space ◽  
Learning Rules ◽  
Higher Dimensional ◽  
New Type ◽  
Three Dimensional Space

AbstractThree dimensional (3D) spatial cells in the mammalian hippocampalformationare believed to support the existence of 3D cognitive maps. Modeling studies are crucial to comprehend the neural principles governing the formation of these maps, yet to date very few have addressed this topic in 3D space. Here, we present a hierarchical network model for the formation of 3D spatial cells using anti-hebbian network. Built on empirical data, the model accounts for the natural emergence of 3D place, border and grid-cells as well as a new type of previously undescribed spatial cell type which we call plane cells. It further explains the plausible reason behind the place and grid-cell anisotropic coding that has been observed in rodents and the potential discrepancy with the predicted periodic coding during 3D volumetric navigation. Lastly, it provides evidence for the importance of unsupervised learning rules in guiding the formation of higher dimensional cognitive maps.

scholarly journals Design, Fabrication, and Testing of a Novel 3D 3-Fingered Electrothermal Microgripper with Multiple Degrees of Freedom

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 444
Author(s):  
Guoning Si ◽  
Liangying Sun ◽  
Zhuo Zhang ◽  
Xuping Zhang
Keyword(s):  
Degrees Of Freedom ◽  
Dynamic Properties ◽  
Three Dimensional ◽  
Polyimide Film ◽  
Zebrafish Embryos ◽  
Multiple Degrees Of Freedom ◽  
Electrothermal Actuator ◽  
3D Space ◽  
Pick And Place

This paper presents the design, fabrication, and testing of a novel three-dimensional (3D) three-fingered electrothermal microgripper with multiple degrees of freedom (multi DOFs). Each finger of the microgripper is composed of a V-shaped electrothermal actuator providing one DOF, and a 3D U-shaped electrothermal actuator offering two DOFs in the plane perpendicular to the movement of the V-shaped actuator. As a result, each finger possesses 3D mobilities with three DOFs. Each beam of the actuators is heated externally with the polyimide film. The durability of the polyimide film is tested under different voltages. The static and dynamic properties of the finger are also tested. Experiments show that not only can the microgripper pick and place microobjects, such as micro balls and even highly deformable zebrafish embryos, but can also rotate them in 3D space.

scholarly journals Effect of the Reynolds Number and Clearance Flow on the Aerodynamic Characteristics of a New Variable Inlet Guide Vane

Aerospace ◽  
2021 ◽  
Vol 8 (7) ◽  
pp. 172
Author(s):  
Hengtao Shi
Keyword(s):  
Reynolds Number ◽  
Guide Vane ◽  
Three Dimensional ◽  
High Growth ◽  
Aerodynamic Characteristics ◽  
Inlet Guide Vane ◽  
Separation Region ◽  
Clearance Flow ◽  
New Type ◽  
Variable Inlet Guide Vane

Recently, a new type of low-loss variable inlet guide vane (VIGV) was proposed for improving a compressor’s performance under off-design conditions. To provide more information for applications, this work investigated the effect of the Reynolds number and clearance flow on the aerodynamic characteristics of this new type of VIGV. The performance and flow field of two representative airfoils with different chord Reynolds numbers were studied with the widely used commercial software ANSYS CFX after validation was completed. Calculations indicate that, with the decrease in the Reynolds number Rec, the airfoil loss coefficient ω and deviation δ first increase slightly and then entered a high growth rate in a low range of Rec. Afterwards, a detailed boundary-layer analysis was conducted to reveal the flow mechanism for the airfoil performance degradation with a low Reynolds number. For the design point, it is the appearance and extension of the separation region on the rear portion; for the maximum incidence point, it is the increase in the length and height of the separation region on the former portion. The three-dimensional VIGV research confirms the Reynolds number effect on airfoils. Furthermore, the clearance leakage flow forms a strong stream-wise vortex by injection into the mainflow, resulting in a high total-pressure loss and under-turning in the endwall region, which shows the potential benefits of seal treatment.

A biomimetic 3D airflow sensor made of an array of two piezoelectric metal-core fibers

Sensor Review ◽  
2017 ◽  
Vol 37 (3) ◽  
pp. 312-321 ◽  
Author(s):  
Yixiang Bian ◽  
Can He ◽  
Kaixuan Sun ◽  
Longchao Dai ◽  
Hui Shen ◽  
...  
Keyword(s):  
Design Methodology ◽  
Spherical Surface ◽  
Three Dimensional ◽  
Three Dimensions ◽  
Piezoceramic Cylinder ◽  
Metal Core ◽  
Content Type ◽  
3D Space ◽  
Highly Sensitive ◽  
Airflow Sensor

Purpose The purpose of this paper is to design and fabricate a three-dimensional (3D) bionic airflow sensing array made of two multi-electrode piezoelectric metal-core fibers (MPMFs), inspired by the structure of a cricket’s highly sensitive airflow receptor (consisting of two cerci). Design/methodology/approach A metal core was positioned at the center of an MPMF and surrounded by a hollow piezoceramic cylinder. Four thin metal films were spray-coated symmetrically on the surface of the fiber that could be used as two pairs of sensor electrodes. Findings In 3D space, four output signals of the two MPMFs arrays can form three “8”-shaped spheres. Similarly, the sensing signals for the same airflow are located on a spherical surface. Originality/value Two MPMF arrays are sufficient to detect the speed and direction of airflow in all three dimensions.

New Type of Two Degree of Freedom Motor Three-Dimensional Tooth Layer Field Application and Solution

2013 ◽  
Vol 391 ◽  
pp. 232-236
Author(s):  
Wen Huan Yang ◽  
Hai Xu Chen ◽  
Shuang Xie ◽  
Chun Ren Fang
Keyword(s):  
Linear Equations ◽  
Three Dimensional ◽  
Field Application ◽  
Degree Of Freedom ◽  
Refined Method ◽  
New Type ◽  
Type Motor ◽  
Quasi Newton ◽  
Two Degree Of Freedom ◽  
Non Linear Equations

A new Multi-degree of freedom motor and its establishing of teeth layer parameters have been introduced in the paper, also including application method of database, namely using Quasi-Newton methods to solve the non-linear equations of the new motors magnetic circuit net, formed a refined method for designing and analyzing of motor. The establishment of 3d tooth layer parameters database, is provided for the calculation in the design of the new type motor conveniently.

Features of geometric design of planetary rotary hydraulic machines with satellite stands

2020 ◽  
pp. 472-478
Author(s):  
D.V. Fadyushin ◽  
G.Yu. Volkov
Keyword(s):  
Three Dimensional ◽  
Geometric Design ◽  
Design System ◽  
Link Mechanism ◽  
Hydraulic Machines ◽  
New Type ◽  
Geometric Calculation

А method of geometric calculation of a new type of planetary rotary hydraulic machines (PRGM) with satellite stands is developed. The method includes the steps of: 1) calculation of the initial round-link mechanism; 2) calculation of non-round links of the PRGM with outstretches; 3) construction and integration of three-dimensional design system COMPAS-3D fragments of crenellated crowns corresponding to the phases of abutments and lifting-lowering satellites; 4) correction of the toothed contours to eliminate the phenomenon of mismatch of satellite centers with the points of intersection of the trajectories of these centers in their movement relative to the rotor and stator. PRGM with satellite stands are designed to operate as vacuum pumps, compressors and pneumatic motors.

Three-Dimensional Curve Tracking for Particles Using Gyroscopic Control

2017 ◽  
Vol 139 (12) ◽  
Author(s):  
Chuanfeng Wang
Keyword(s):  
Tracking Control ◽  
Three Dimensional ◽  
Smooth Curve ◽  
Autonomous Agent ◽  
Control Law ◽  
Steering Control ◽  
3D Space ◽  
Moving Direction ◽  
Tangent Direction ◽  
Curve Tracking

Curve-tracking control is challenging and fundamental in many robotic applications for an autonomous agent to follow a desired path. In this paper, we consider a particle, representing a fully actuated autonomous robot, moving at unit speed under steering control in the three-dimensional (3D) space. We develop a feedback control law that enables the particle to track any smooth curve in the 3D space. Representing the 3D curve in the natural Frenet frame, we construct the control law under which the moving direction of the particle will be aligned with the tangent direction of the desired curve and the distance between the particle and the desired curve will converge to zero. We demonstrate the effectiveness of the proposed 3D curve-tracking control law in simulations.

Sign in / Sign up

Export Citation Format

Share Document