The synergetic tensile deformation behavior of Cu/Al laminated composites prepared by twin-roll casting technology

2018 ◽  
Vol 6 (1) ◽  
pp. 016530 ◽  
Author(s):  
Shuaiyang Liu ◽  
Aiqin Wang ◽  
Hanwei Tian ◽  
Jingpei Xie
Keyword(s):  
Deformation Behavior ◽  
Tensile Deformation ◽  
Laminated Composites ◽  
Twin Roll Casting ◽  
Casting Technology ◽  
Roll Casting ◽  
Tensile Deformation Behavior ◽  
Twin Roll

scholarly journals Hot Deformation Behavior and Microstructural Evolution of Twin-Roll-Casting Mg Alloy during High-Temperature Compression

2019 ◽  
Vol 2019 ◽  
pp. 1-7
Author(s):  
Qingshan Yang ◽  
Jiahong Dai ◽  
Sensen Chai ◽  
Daliang Yu ◽  
Bin Jiang ◽  
...  
Keyword(s):  
Grain Size ◽  
Flow Stress ◽  
Microstructural Evolution ◽  
Deformation Behavior ◽  
Volume Fraction ◽  
Mg Alloy ◽  
Twin Roll Casting ◽  
Roll Casting ◽  
Average Grain Size ◽  
Twin Roll

The deformation behavior and microstructural evolution of twin-roll-casting AZ31 Mg alloy sheets were investigated via hot compression tests at 0°, 5°, and 10° from the normal direction. Compression strains of 5%, 15%, 25%, and 35% were employed at high temperatures of 450°C and 500°C. The flow stress as well as the difference in the flow stress associated with different sampling directions decreased when the temperature was increased. Furthermore, the volume fraction of dynamically recrystallized grains increased with increasing deformation, whereas the average grain size decreased. The DRX grain size and the volume fraction of dynamically recrystallized grains increased with increasing deformation temperature. During ultrahigh temperature compression, the effect of sampling direction on the compression microstructure is relatively small.

scholarly journals Study of the Mechanical Properties of Strips Obtained in TRC Line

2016 ◽  
Vol 61 (2) ◽  
pp. 1101-1108 ◽  
Author(s):  
A. Mamala ◽  
W. Ściężor ◽  
P. Kwaśniewski ◽  
J. Grzebinoga ◽  
R. Kowal
Keyword(s):  
Mechanical Properties ◽  
Chemical Composition ◽  
Cold Rolling ◽  
Rolling Process ◽  
Twin Roll Casting ◽  
Integrated Method ◽  
Casting Technology ◽  
Roll Casting ◽  
Processing Line ◽  
Twin Roll

Abstract Twin Roll Casting technology belongs to modern, integrated method of processing aluminum and its alloys. This method includes preparation of liquid metal and its continuous casting between the rotating cylindrical crystallizers, optional homogenizing treatment, cold rolling and optional interoperation or final heat treatment. Final products of TRC method are strips with a thickness from few to several millimeters, which can be directly subjected to cold rolling process to afford a sheet. Properties of final product are limited by the material’s condition, its chemical composition and also selected path of its processing technology. The paper presents research results of chemical composition and mechanical properties of strips obtained in Twin Roll Casting processing line.

Sign in / Sign up

Export Citation Format

Share Document