Optimized design of hydraulic silicone pad for OCA lamination of bended cover window in OLED display

Author(s):  
Dong-Hoon Jang ◽  
Kwan-Young Han
2019 ◽  
Vol 2019 (1) ◽  
pp. 104-107
Author(s):  
Ye Seul Baek ◽  
Youngshin Kwak ◽  
Sehyeok Park

The image quality is affected by the black luminance level of the image. This research aimed to investigate how low luminance levels are required to maintain image quality. The psychophysical experiment was carried out in a dark room using OLED display. Total of 6 different black luminance levels (0.003, 0.05, 0.1, 0.2, 0.3, and 1 cd/m2) were used in the experiment. Total of 20 participants was invited to evaluate the image quality. For the experiment, twelve test images are used and these test images categorized into three groups as dark, medium bright and bright image group by image histogram distribution. Each image is rendered by adjusting six different black luminance levels. Result found that the black level is higher than 0.1 cd/m2, the preference for the image is decreased. The best performance is achieved when the black level is 0.003 cd/m2, but there is no big difference from 0.1 cd/m2. The final result shows that a change in black level between about 0.003 cd/m2 and 0.1 cd/m2 does not significantly affect image quality.


2019 ◽  
Vol 2019 (1) ◽  
pp. 331-338 ◽  
Author(s):  
Jérémie Gerhardt ◽  
Michael E. Miller ◽  
Hyunjin Yoo ◽  
Tara Akhavan

In this paper we discuss a model to estimate the power consumption and lifetime (LT) of an OLED display based on its pixel value and the brightness setting of the screen (scbr). This model is used to illustrate the effect of OLED aging on display color characteristics. Model parameters are based on power consumption measurement of a given display for a number of pixel and scbr combinations. OLED LT is often given for the most stressful display operating situation, i.e. white image at maximum scbr, but having the ability to predict the LT for other configurations can be meaningful to estimate the impact and quality of new image processing algorithms. After explaining our model we present a use case to illustrate how we use it to evaluate the impact of an image processing algorithm for brightness adaptation.


Shore & Beach ◽  
2020 ◽  
pp. 65-73
Author(s):  
Gen Liu ◽  
Feng Cai ◽  
Hongshuai Qi ◽  
Jianhui Liu ◽  
Gang Lei ◽  
...  

Beach nourishment has been widely used for beach protection around the world. However, there is limited information about beach nourishment in China. This study offers an overview of beach nourishment practices, status and technological advances in China, based on the literature, reports, and personal communications. The results demonstrate that beach nourishment has been recognized as an effective and environmentally friendly measure to combat coastal erosion and has been increasingly adopted in China, especially in the past decade. The unique characteristics of coastal China resulted in a difference in beach nourishment between China and Western developed countries in terms of the types, objectives, and shapes of beach nourishment. For the types of nourishments in China, there were approximately the same number of restored beaches and newly constructed beaches. For fill sediment, homogeneous fill and heterogeneous fill comprised 51.1% and 48.9% of projects, respectively. The objective of beach nourishment was mainly to promote coastal tourism, and the shape of nourished beaches was dominated by headland bays. This study also indicated that China has achieved a number of technological advances in beach nourishment, including methods of beach nourishment on severely eroded coasts and muddy coasts, an optimized design of drain pipes involved in urban beaches, and ecological design considerations. From the past decade of practices, four aspects were proposed as considerations for future nourishment: sand sources, technique advances, ecological effects, and management of beach nourishments.


2020 ◽  
Vol 35 (11) ◽  
pp. 1110-1119
Author(s):  
Shuo CAO ◽  
◽  
Zhi-gao ZHANG ◽  
Zhi-yun ZHAO ◽  
Hu GU ◽  
...  

2009 ◽  
Vol 29 (5) ◽  
pp. 477-480
Author(s):  
Hai-ying TENG ◽  
Mao-hai SONG ◽  
Liang CHENG ◽  
Yu-xiu KONG ◽  
Jian JIANG

2019 ◽  
Vol 267 ◽  
pp. 02001
Author(s):  
Liangli Xiao ◽  
Yan Liu ◽  
Zhuang Du ◽  
Zhao Yang ◽  
Kai Xu

This study combines specific high-rise shear wall residential projects with the Revit to demonstrate BIM application processes. The use of R-Star CAD may help to realize the link barrier of the building information model and the structural analysis software PKPM. Sequentially, the information supplement of the structural analysis model is completed by extracting the structural information with the Revit secondary development. By the collaborative design platform based on BIM technology, the paper examines the collision check of structural model, conducts collision analysis on other professional models and modifies the design scheme for conflict points. After the statistics of material usage, an optimized design is proposed. The findings of this paper could contribute to provide some reference for the specific application of BIM in structural design and realize the application of BIM technology in the process of building structure design.


Sign in / Sign up

Export Citation Format

Share Document