Establishing optimal friction stir welding parameters for AA2219-T87 Al-alloy using comprehensive RSM and GA approach

2021 ◽  
Author(s):  
Boddu Rajnaveen ◽  
Govada Rambabu ◽  
Kollabothina Prakash ◽  
Kotipalli Srinivasa Rao
Keyword(s):  
Friction Stir Welding ◽  
Aluminium Alloy ◽  
Welding Process ◽  
Welding Parameter ◽  
Welding Parameters ◽  
Al Alloy ◽  
Regression Equations ◽  
Corrosion Properties ◽  
Friction Stir ◽  
Aa2219 Alloy

Abstract AA2219-T87 aluminium alloy has been used in aerospace applications because of its high strength, low density and resistance to corrosion. The copper in the alloy improves the hardness and lowers melting point, which makes two sections easily joined with a process called friction stir welding of aluminium alloy. In the present work, heat-treated AA2219 alloy was butt welded by solid-state friction stir welding process. This work aims to develop a suitable combination of welding parameters for producing defect-free weld joints of AA2219 alloy to improve tensile and corrosion properties. The most influencing control parameter for optimising the friction stir welding responses was determined using sophisticated design of experiments (DOE) techniques. Ultimate tensile strength and corrosion resistance are observed as responses in this study. To achieve the desired weld responses, a three-factor, three-level Box-behneken design was used. Analysis of Variance (ANOVA) was carried out to examine the interaction effect and significant welding parameter to set the optimal level of welding conditions. Multi-response regression equations have been developed using response surface methodology (RSM) to estimate the output characteristics of weld. The Genetic algorithm (GA) was used to optimise the predicted mathematical model under given optimization constraints. The results shown that the optimum responses are obtained at input factors rotational speed 300 rpm, welding speed 80 mm/min, and axial force of 10kN.

scholarly journals Optimization of Process Parameters for Friction Stir Welding of Dissimilar Aluminium Alloy AA6061 to AA5183 using TOPSIS Technique

2019 ◽  
Vol 8 (9S3) ◽  
pp. 1315-1319
Keyword(s):  
Friction Stir Welding ◽  
Aluminium Alloy ◽  
Rotational Speed ◽  
Transverse Velocity ◽  
Welding Process ◽  
Fusion Welding ◽  
Welding Parameters ◽  
Optimum Process ◽  
Tool Rotational Speed ◽  
Friction Stir

Friction stir welding has proven to be the most promising solid state joining process. It can be used to get high weldability in joining of high strength aerospace aluminium alloys and other metallic alloys which used to be low with traditional fusion welding process. This paper emphasises on finding the optimum process parameter for friction stir welding of dissimilar aluminium alloy AA6061 to AA5183 using multi criteria decision making method (MCDM). Friction stir welding was done at different tool rotational speed and transverse velocity and mechanical properties such as tensile strength, percentage elongation and hardness were studied for each weld specimen. Finally optimization was done using TOPSIS (Techniqueof Ordered Preference by Similarity to Ideal Solution). The result revealed that the tool rotational speed of 1200 rpm and welding speed of 80mm/min are the optimum welding parameters.

scholarly journals Optimization of Process Parameters for Friction Stir Welding of Dissimilar Aluminium Alloy AA6061 to AA5183 using TOPSIS Technique

2019 ◽  
Vol 8 (2S3) ◽  
pp. 1625-1629
Keyword(s):  
Friction Stir Welding ◽  
Aluminium Alloy ◽  
Rotational Speed ◽  
Transverse Velocity ◽  
Welding Process ◽  
Fusion Welding ◽  
Welding Parameters ◽  
Optimum Process ◽  
Tool Rotational Speed ◽  
Friction Stir

Friction stir welding has proven to be the most promising solid state joining process. It can be used to get high weldability in joining of high strength aerospace aluminium alloys and other metallic alloys which used to be low with traditional fusion welding process. This paper emphasises on finding the optimum process parameter for friction stir welding of dissimilar aluminium alloy AA6061 to AA5183 using multi criteria decision making method (MCDM). Friction stir welding was done at different tool rotational speed and transverse velocity and mechanical properties such as tensile strength, percentage elongation and hardness were studied for each weld specimen. Finally optimization was done using TOPSIS (Techniqueof Ordered Preference by Similarity to Ideal Solution). The result revealed that the tool rotational speed of 1200 rpm and welding speed of 80mm/min are the optimum welding parameters

scholarly journals Optimization of Friction Stir Welding Process Parameters to joint 7075-T6 Aluminium Alloy by Utilizing Taguchi Technique

2019 ◽  
Vol 25 (5) ◽  
pp. 1-15 ◽  
Author(s):  
Abbas Akram Abbas ◽  
Hazim Hattem Abdulkadhum
Keyword(s):  
Friction Stir Welding ◽  
Aluminium Alloy ◽  
Welding Process ◽  
Ultimate Tensile Stress ◽  
Alloy Sheet ◽  
Welding Parameters ◽  
Taguchi Technique ◽  
Friction Stir ◽  
Friction Stir Welding Process ◽  
Thread Pitch

In this study, a 3 mm thickness 7075-T6 aluminium alloy sheet was used in the friction stir welding process. Using the design of experiment to reduce the number of experiments and to obtain the optimum friction stir welding parameters by utilizing Taguchi technique based on the ultimate tensile test results. Orthogonal array of L9 (33) was used based on three numbers of the parameters and three levels for each parameter, where shoulder-workpiece interference depth (0.20, 0.25, and 0.3) mm, pin geometry (cylindrical thread flat end, cylindrical thread with 3 flat round end, cylindrical thread round end), and thread pitch (0.8, 1, and 1.2) mm) this technique executed by Minitab 17 software. The results showed that the optimum friction stir welding parameters were 0.25 mm shoulder-workpiece interference depth, cylindrical thread flat end pin shape, 1.2 mm thread pitch depending on the S ̸ N ratio and ANOVA analysis and the welding efficiency was 93.3% based on the ultimate tensile stress.  

Effect of Friction Stir Welding Parameters on Thermal and Tensile Behavior of Aluminum Weldments Using Double Shoulder Tools

2012 ◽  
Vol 622-623 ◽  
pp. 323-329
Author(s):  
Ebtisam F. Abdel-Gwad ◽  
A. Shahenda ◽  
S. Soher
Keyword(s):  
Tensile Strength ◽  
Friction Stir Welding ◽  
Welding Process ◽  
Tensile Behavior ◽  
Frictional Heat ◽  
Welding Parameters ◽  
Friction Stir ◽  
Aluminum Base ◽  
Tool Pin ◽  
Strength And Ductility

Friction stir welding (FSW) process is a solid state welding process in which the material being welded does not melt or recast. This process uses a non-consumable tool to generate frictional heat in the abutting surfaces. The welding parameters and tool pin profile play major roles in deciding the weld quality. In this investigation, an attempt has been made to understand effects of process parameters include rotation speeds, welding speeds, and pin diameters on al.uminum weldment using double shoulder tools. Thermal and tensile behavior responses were examined. In this direction temperatures distribution across the friction stir aluminum weldment were measured, besides tensile strength and ductility were recorded and evaluated compared with both single shoulder and aluminum base metal.

scholarly journals Analysis of the influence of position of welding materials on the FSW seams properties for three dissimilar aluminium alloy

2018 ◽  
Vol 178 ◽  
pp. 03003 ◽  
Author(s):  
Ana Bosneag ◽  
Marius Adrian Constantin ◽  
Eduard Niţu ◽  
Monica Iordache
Keyword(s):  
Friction Stir Welding ◽  
Aluminium Alloy ◽  
Process Parameters ◽  
Arc Welding ◽  
Welding Process ◽  
Dissimilar Materials ◽  
Workpiece Material ◽  
Friction Stir ◽  
Welding Joints ◽  
Welding Materials

Friction Stir Welding, abbreviated FSW is a new and innovative welding process. This welding process is increasingly required, more than traditional arc welding, in industrial environment such us: aeronautics, shipbuilding, aerospace, automotive, railways, general fabrication, nuclear, military, robotics and computers. FSW, more than traditional arc welding, have a lot of advantages, such us the following: it uses a non-consumable tool, realise the welding process without melting the workpiece material, can be realised in all positions (no weld pool), results of good mechanical properties, can use dissimilar materials and have a low environmental impact. This paper presents the results of experimental investigation of friction stir welding joints to three dissimilar aluminium alloy AA2024, AA6061 and AA7075. For experimenting the value of the input process parameters, the rotation speed and advancing speed were kept the same and the position of plates was variable. The exit date recorded in the time of process and after this, will be compared between them and the influence of position of plate will be identified on the welding seams properties and the best position of plates for this process parameters and materials.

scholarly journals Thermo-mechanical analysis of linear welding stage in friction stir welding - influence of welding parameters

2021 ◽  
pp. 186-186
Author(s):  
Darko Veljic ◽  
Marko Rakin ◽  
Aleksandar Sedmak ◽  
Nenad Radovic ◽  
Bojan Medjo ◽  
...  
Keyword(s):  
Friction Stir Welding ◽  
Heat Generation ◽  
Welding Speed ◽  
Reaction Force ◽  
Material Model ◽  
Element Model ◽  
Welding Parameters ◽  
Al Alloy ◽  
Friction Stir ◽  
Fsw Parameters

The influence of friction stir welding (FSW) parameters on thermo-mechanical behaviour of the material during welding is analysed. An aluminium alloy is considered (Al 2024 T351), and different rotating speed and welding speed are applied. Finite element model consists of the plate (Al alloy), backing plate and welding tool, and it is formed and solved in software package Simulia Abaqus. The influence of the welding conditions on material behaviour is taken into account by application of the Johnson-Cook material model. The rotation of the tool affects the results: if increased, it contributes to an increase of friction-generated heat intensity. The other component of the generated heat, the plastic deformation of the material, is negligibly changed. When the welding speed is increased, the intensity of friction-generated heat decreases, while the heat generation due to plastic deforming increases. Combined, these two effects cause small change of the total heat generation. For the same welded joint length, the plate welded by lower speed will be heated more intensively. The changes of the heat generation influence both the temperature field and reaction force, which are also considered.

Friction Stir Welding of Elements Made of Cast Aluminium Alloys

2014 ◽  
Vol 59 (1) ◽  
pp. 385-392
Author(s):  
B. Rams ◽  
A. Pietras ◽  
K. Mroczka
Keyword(s):  
Friction Stir Welding ◽  
Aluminium Alloy ◽  
Aluminium Alloys ◽  
Welding Parameters ◽  
Process Conditions ◽  
Friction Stir ◽  
Seam Weld ◽  
Cast Aluminium ◽  
Weld Structure ◽  
Welding Stability

Abstract The article presents application of FSW method for joining elements made of cast aluminium alloys which are hardly weldable with other known welding techniques. Research’s results of plasticizing process of aluminium and moulding of seam weld during different FSW process’ conditions were also presented. Influence of welding parameters, shape and dimensions of tool on weld structure, welding stability and quality was examined. Application of FSW method was exemplified on welding of hemispheres for valves made of cast aluminium alloy EN AC-43200.

Effect of double-sided friction stir welding on the mechanical and microstructural characteristics of AA5754 aluminium alloy

2021 ◽  
Vol 63 (9) ◽  
pp. 829-835
Author(s):  
Sare Çelik ◽  
Fatmagül Tolun
Keyword(s):  
Friction Stir Welding ◽  
Al Alloys ◽  
Fusion Welding ◽  
Welding Parameters ◽  
Al Alloy ◽  
Test Results ◽  
Feeding Rates ◽  
Microstructural Characteristics ◽  
Friction Stir ◽  
Tool Tilt Angle

Abstract AA5754Al alloy is widely used in industry. However, as in the case of all Al alloys, the 5xxx series Al alloys cannot be easily joined through fusion welding techniques. To address this problem, in this study, the effect of double-sided friction stir welding at various tool rotational speeds (450, 710, and 900 rpm), feeding rates (40, 50, and 80 mm × min-1), and tool tilt angles (0°, 1°, 2°) on the welding parameters and mechanical and microstructural characteristics of AA5754 Al alloy was determined. Tensile strength tests and microhardness tests were performed to examine the mechanical properties of the welded specimens. The microstructures of the welded zone were examined by obtaining optical microscopy and scanning electron microscopy images. The tensile test results indicated that the specimens exhibited the highest welding performance of 95.17 % at a tool rotational speed, feed rate, and tool tilt angle of 450 rpm, 50 mm × min-1 and 1°, respectively.

Effects of Welding Parameters in Micro Friction Stir Lap Welding of Aluminum A1100

2013 ◽  
Vol 789 ◽  
pp. 356-359 ◽  
Author(s):  
Ario Sunar Baskoro ◽  
A.A.D. Nugroho ◽  
D. Rahayu ◽  
Suwarsono ◽  
Gandjar Kiswanto ◽  
...  
Keyword(s):  
Tilt Angle ◽  
Welding Process ◽  
Tool Material ◽  
Tensile Load ◽  
Welding Parameter ◽  
Welding Parameters ◽  
Friction Stir Lap Welding ◽  
Friction Stir ◽  
Lap Welding ◽  
Welding Processes

Technology of Friction Stir Welding (FSW) as a technique for joining metal is relatively new. In some cases on Aluminum joining, FSW gives better results compared with the Arc Welding processes, including the quality of welds and less distortion. FSW can even use milling machine or drilling machine, by replacing the tools and the appropriate accessories. The purpose of this study is to analyze the effect of process parameters onmicro Friction Stir Lap Weldingto the tensile load of welds. In this case, Aluminum material A1100, with thickness of 0.4 mm was used. Tool material of HSS material was shaped with micro grinding process. Tool shoulder diameter was 3 mm, while the diameter pin was 2 mm and a length of pin was 0.7 mm. The parameter variations used in this study were the variable of spindle speed (2300, 2600, and 2900 rpm), variable oftooltilt angle(0, 1, 2 degree) and a variable ofFeed rate(50, 60, 70 mm/min). Where the variation of these parameters will affect to the mechanical properties of welds (as response) was the tensile load. Analysis and optimization parameters between the micro FSLW parameters with the tensile load of welds, is used aResponse Surface Methods(RSM). From the result of experiment and analysis, it is shown that the important welding parameter in Micro Friction Stir Lap welding process is tilt angle.

Sign in / Sign up

Export Citation Format

Share Document