scholarly journals Correlating nuclear morphology and external force with combined atomic force microscopy and light sheet imaging separates roles of chromatin and lamin A/C in nuclear mechanics

2020 ◽  
Vol 31 (16) ◽  
pp. 1788-1801 ◽  
Author(s):  
Chad M. Hobson ◽  
Megan Kern ◽  
E. Timothy O’Brien ◽  
Andrew D. Stephens ◽  
Michael R. Falvo ◽  
...  

Chromatin and lamin A/C separately resist strain in nuclear volume and surface area, respectively, during compression as studied with combined atomic force microscopy and light sheet imaging. Chromatin decompaction further alters curvature dynamics during indentation.

Author(s):  
Chad M. Hobson ◽  
Megan Kern ◽  
E. Timothy O’Brien ◽  
Andrew D. Stephens ◽  
Michael R. Falvo ◽  
...  

AbstractNuclei are constantly under external stress – be it during migration through tight constrictions or compressive pressure by the actin cap – and the mechanical properties of nuclei govern their subsequent deformations. Both altered mechanical properties of nuclei and abnormal nuclear morphologies are hallmarks of a variety of disease states. Little work, however, has been done to link specific changes in nuclear shape to external forces. Here, we utilize a combined atomic force microscope and light sheet microscope (AFM-LS) to show SKOV3 nuclei exhibit a two-regime force response that correlates with changes in nuclear volume and surface area, allowing us to develop an empirical model of nuclear deformation. Our technique further decouples the roles of chromatin and lamin A/C in compression, showing they separately resist changes in nuclear volume and surface area respectively; this insight was not previously accessible by Hertzian analysis. A two-material finite element model supports our conclusions. We also observed that chromatin decompaction leads to lower nuclear curvature under compression, which is important for maintaining nuclear compartmentalization and function. The demonstrated link between specific types of nuclear morphological change and applied force will allow researchers to better understand the stress on nuclei throughout various biological processes.


1994 ◽  
Vol 367 ◽  
Author(s):  
T. Yoshinobu ◽  
A. Iwamoto ◽  
K. Sudoh ◽  
H. Iwasaki

AbstractThe scaling behavior of the surface roughness of a-and poly-Si deposited on Si was investigated by atomic force microscopy (AFM). The interface width W(L), defined as the rms roughness as a function of the linear size of the surface area, was calculated from various sizes of AFM images. W(L) increased as a power of L with the roughness exponent ∝ on shorter length scales, and saturated at a constant value of on a macroscopic scale. The value of roughness exponent a was 0.48 and 0.90 for a-and poly-Si, respectively, and σ was 1.5 and 13.6nm for 350nm-thick a-Si and 500nm-thick poly-Si, respectively. The AFM images were compared with the surfaces generated by simulation.


2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Gregory S. Watson ◽  
Bronwen W. Cribb ◽  
Jolanta A. Watson

Many insects have evolved refined self-cleaning membrane structuring to contend with an environment that presents a range of potential contaminates. Contamination has the potential to reduce or interfere with the primary functioning of the wing membrane or affect other wing cuticle properties, (for example, antireflection). Insects will typically encounter a variety of air-borne contaminants which include plant matter and soil fragments. Insects with relatively long or large wings may be especially susceptible to fouling due to the high-wing surface area and reduced ability to clean their extremities. In this study we have investigated the adhesion of particles (pollens and hydrophilic silica spheres) to wing membranes of the super/hydrophobic cicada (Thopha sessiliba), butterfly (Eurema hecabe), and the hydrophilic wing of flower wasp (Scolia soror). The adhesional forces with both hydrophobic insects was significantly lower for all particle types than the hydrophilic insect species studied.


2020 ◽  
Author(s):  
Z Kennedy ◽  
J Newberg ◽  
M Goelzer ◽  
Stefan Judex ◽  
CK Fitzpatrick ◽  
...  

AbstractNuclear mechanics is emerging as a key component of stem cell function and differentiation. While changes in nuclear structure can be visually imaged with confocal microscopy, mechanical characterization of the nucleus and its sub-cellular components require specialized testing equipment. A computational model permitting cell-specific mechanical information directly from confocal and atomic force microscopy of cell nuclei would be of great value. Here, we developed a computational framework for generating finite element models of isolated cell nuclei from multiple confocal microscopy scans and simple atomic force microscopy (AFM) tests. Confocal imaging stacks of isolated mesenchymal stem cells (MSC) were converted into finite element models and siRNA-mediated LaminA/C depletion isolated chromatin and LaminA/C structures. Using AFM-measured experimental stiffness values, a set of conversion factors were determined for both chromatin and LaminA/C to map the voxel intensity of the original images to the element stiffness, allowing the prediction of nuclear stiffness in an additional set of other nuclei. The developed computational framework will identify the contribution of a multitude of sub-nuclear structures and predict global nuclear stiffness of multiple nuclei based on simple nuclear isolation protocols, confocal images and AFM tests.


2009 ◽  
Vol 96 (10) ◽  
pp. 4319-4325 ◽  
Author(s):  
Jens Schäpe ◽  
Steffi Prauße ◽  
Manfred Radmacher ◽  
Reimer Stick

Sign in / Sign up

Export Citation Format

Share Document