scholarly journals DECENT: differential expression with capture efficiency adjustmeNT for single-cell RNA-seq data

2019 ◽  
Vol 35 (24) ◽  
pp. 5155-5162 ◽  
Author(s):  
Chengzhong Ye ◽  
Terence P Speed ◽  
Agus Salim
Keyword(s):  
Single Cell ◽  
Differential Expression ◽  
Type I Error ◽  
R Package ◽  
Supplementary Information ◽  
Type I ◽  
Common Phenomenon ◽  
Rna Seq ◽  
Capture Process ◽  
Technological Platforms

Abstract Motivation Dropout is a common phenomenon in single-cell RNA-seq (scRNA-seq) data, and when left unaddressed it affects the validity of the statistical analyses. Despite this, few current methods for differential expression (DE) analysis of scRNA-seq data explicitly model the process that gives rise to the dropout events. We develop DECENT, a method for DE analysis of scRNA-seq data that explicitly and accurately models the molecule capture process in scRNA-seq experiments. Results We show that DECENT demonstrates improved DE performance over existing DE methods that do not explicitly model dropout. This improvement is consistently observed across several public scRNA-seq datasets generated using different technological platforms. The gain in improvement is especially large when the capture process is overdispersed. DECENT maintains type I error well while achieving better sensitivity. Its performance without spike-ins is almost as good as when spike-ins are used to calibrate the capture model. Availability and implementation The method is implemented as a publicly available R package available from https://github.com/cz-ye/DECENT. Supplementary information Supplementary data are available at Bioinformatics online.

scholarly journals DEsingle for detecting three types of differential expression in single-cell RNA-seq data

2017 ◽  
Author(s):  
Zhun Miao ◽  
Ke Deng ◽  
Xiaowo Wang ◽  
Xuegong Zhang
Keyword(s):  
Single Cell ◽  
Differential Expression ◽  
Negative Binomial ◽  
Single Cells ◽  
R Package ◽  
Supplementary Information ◽  
Binomial Model ◽  
Supplementary Data ◽  
Rna Seq ◽  
Real Zeros

AbstractSummaryThe excessive amount of zeros in single-cell RNA-seq data include “real” zeros due to the on-off nature of gene transcription in single cells and “dropout” zeros due to technical reasons. Existing differential expression (DE) analysis methods cannot distinguish these two types of zeros. We developed an R package DEsingle which employed Zero-Inflated Negative Binomial model to estimate the proportion of real and dropout zeros and to define and detect 3 types of DE genes in single-cell RNA-seq data with higher accuracy.Availability and ImplementationThe R package DEsingle is freely available at https://github.com/miaozhun/DEsingle and is under Bioconductor’s consideration [email protected] informationSupplementary data are available at bioRxiv online.

scholarly journals DECENT: Differential Expression with Capture Efficiency adjustmeNT for single-cell RNA-seq data

2017 ◽  
Author(s):  
Chengzhong Ye ◽  
Terence P Speed ◽  
Agus Salim
Keyword(s):  
Single Cell ◽  
Differential Expression ◽  
R Package ◽  
Statistical Analyses ◽  
Capture Efficiency ◽  
Superior Performance ◽  
Common Phenomenon ◽  
Rna Seq ◽  
Improve Performance

AbstractDropout is a common phenomenon in single-cell RNA-seq (scRNA-seq) data, and when left unaddressed affects the validity of the statistical analyses. Despite this, few current methods for differential expression (DE) analysis of scRNA-seq data explicitly model the dropout process. We develop DECENT, a DE method for scRNA-seq data that explicitly models the dropout process and performs statistical analyses on the inferred pre-dropout counts. We demonstrate using simulated and real datasets the superior performance of DECENT compared to existing methods. DECENT does not require spike-in data, but spike-ins can be used to improve performance when available. The method is implemented in a publicly-available R package.

scholarly journals RUV-III-NB: Normalization of single cell RNA-seq Data

2021 ◽  
Author(s):  
Agus Salim ◽  
Ramyar Molania ◽  
Jianan Wang ◽  
Alysha De Livera ◽  
Rachel Thijssen ◽  
...  
Keyword(s):  
Single Cell ◽  
Cell Biology ◽  
R Package ◽  
Normalization Method ◽  
Supplementary Information ◽  
Rna Seq ◽  
Batch Effects ◽  
Library Size ◽  
Number Of Factors ◽  
Technological Platforms

Motivation: Despite numerous methodological advances, the normalization of single cell RNA-seq (scRNA-seq) data remains a challenging task. The performance of different methods can vary greatly across datasets. Part of the reason for this is the different kinds of unwanted variation, including library size, batch and cell cycle effects, and the association of these with the biology embodied in the cells. A normalization method that does not explicitly take into account cell biology risks removing some of the signal of interest. Here we propose RUV-III-NB, a statistical method that can be used to adjust counts for library size and batch effects. The method uses the concept of pseudo-replicates to ensure that relevant features of the unwanted variation are only inferred from cells with the same biology and return adjusted sequencing count as output. Results: Using five publicly available datasets that encompass different technological platforms, kinds of biology and levels of association between biology and unwanted variation, we show that RUV-III-NB manages to remove library size and batch effects, strengthen biological signals, improve differential expression analyses, and lead to results exhibiting greater concordance with independent datasets of the same kind. The performance of RUV-III-NB is consistent across the five datasets and is not sensitive to the number of factors assumed to contribute to the unwanted variation. It also shows promise for removing other kinds of unwanted variation such as platform effects. Availability: The method is implemented as a publicly available R package available from https://github.com/limfuxing/ruvIIInb. Contact: [email protected], [email protected] Supplementary information: Online Supplementary Methods

ExperimentSubset: an R package to manage subsets of Bioconductor Experiment objects

2021 ◽  
Author(s):  
Irzam Sarfraz ◽  
Muhammad Asif ◽  
Joshua D Campbell
Keyword(s):  
Single Cell ◽  
R Package ◽  
Poor Quality ◽  
Data Matrix ◽  
Supplementary Information ◽  
Data Provenance ◽  
Rna Seq ◽  
Efficient Management ◽  
The Matrix ◽  
The Relationship

Abstract Motivation R Experiment objects such as the SummarizedExperiment or SingleCellExperiment are data containers for storing one or more matrix-like assays along with associated row and column data. These objects have been used to facilitate the storage and analysis of high-throughput genomic data generated from technologies such as single-cell RNA sequencing. One common computational task in many genomics analysis workflows is to perform subsetting of the data matrix before applying down-stream analytical methods. For example, one may need to subset the columns of the assay matrix to exclude poor-quality samples or subset the rows of the matrix to select the most variable features. Traditionally, a second object is created that contains the desired subset of assay from the original object. However, this approach is inefficient as it requires the creation of an additional object containing a copy of the original assay and leads to challenges with data provenance. Results To overcome these challenges, we developed an R package called ExperimentSubset, which is a data container that implements classes for efficient storage and streamlined retrieval of assays that have been subsetted by rows and/or columns. These classes are able to inherently provide data provenance by maintaining the relationship between the subsetted and parent assays. We demonstrate the utility of this package on a single-cell RNA-seq dataset by storing and retrieving subsets at different stages of the analysis while maintaining a lower memory footprint. Overall, the ExperimentSubset is a flexible container for the efficient management of subsets. Availability and implementation ExperimentSubset package is available at Bioconductor: https://bioconductor.org/packages/ExperimentSubset/ and Github: https://github.com/campbio/ExperimentSubset. Supplementary information Supplementary data are available at Bioinformatics online.

scholarly journals Super-delta2: An Enhanced Differential Expression Analysis Procedure for Multi-Group Comparisons of RNA-seq Data

2021 ◽  
Author(s):  
Zihan Cui ◽  
Yuhang Liu ◽  
Jinfeng Zhang ◽  
Xing Qiu
Keyword(s):  
Breast Cancer ◽  
Differential Expression ◽  
Expression Analysis ◽  
Bias Correction ◽  
Type I Error ◽  
Breast Cancer Dataset ◽  
Type I ◽  
Rna Seq ◽  
Differential Expression Pattern ◽  
Group Comparisons

AbstractBackgroundWe developed super-delta2, a differential gene expression analysis pipeline designed for multi-group comparisons for RNA-seq data. It includes a customized one-way ANOVA F-test and a post-hoc test for pairwise group comparisons; both are designed to work with a multivariate normalization procedure to reduce technical noise. It also includes a trimming procedure with bias-correction to obtain robust and approximately unbiased summary statistics used in these tests. We demonstrated the asymptotic applicability of super-delta2 to log-transformed read counts in RNA-seq data by large sample theory based on Negative Binomial Poisson (NBP) distribution.ResultsWe compared super-delta2 with three commonly used RNA-seq data analysis methods: limma/voom, edgeR, and DESeq2 using both simulated and real datasets. In all three simulation settings, super-delta2 not only achieved the best overall statistical power, but also was the only method that controlled type I error at the nominal level. When applied to a breast cancer dataset to identify differential expression pattern associated with multiple pathologic stages, super-delta2 selected more enriched pathways than other methods, which are directly linked to the underlying biological condition (breast cancer).ConclusionsBy incorporating trimming and bias-correction in the normalization step, super-delta2 was able to achieve tight control of type I error. Because the hypothesis tests are based on asymptotic normal approximation of the NBP distribution, super-delta2 does not require computationally expensive iterative optimization procedures used by methods such as edgeR and DESeq2, which occasionally have convergence issues.

scholarly journals scRNABatchQC: multi-samples quality control for single cell RNA-seq data

2019 ◽  
Vol 35 (24) ◽  
pp. 5306-5308
Author(s):  
Qi Liu ◽  
Quanhu Sheng ◽  
Jie Ping ◽  
Marisol Adelina Ramirez ◽  
Ken S Lau ◽  
...  
Keyword(s):  
Single Cell ◽  
R Package ◽  
Supplementary Information ◽  
Rna Seq ◽  
Technical Artifact ◽  
Multiple Sample ◽  
Systematic Biases ◽  
Cell Transcriptome ◽  
Single Cell Transcriptome ◽  
Spurious Results

Abstract Summary Single cell RNA sequencing is a revolutionary technique to characterize inter-cellular transcriptomics heterogeneity. However, the data are noise-prone because gene expression is often driven by both technical artifacts and genuine biological variations. Proper disentanglement of these two effects is critical to prevent spurious results. While several tools exist to detect and remove low-quality cells in one single cell RNA-seq dataset, there is lack of approach to examining consistency between sample sets and detecting systematic biases, batch effects and outliers. We present scRNABatchQC, an R package to compare multiple sample sets simultaneously over numerous technical and biological features, which gives valuable hints to distinguish technical artifact from biological variations. scRNABatchQC helps identify and systematically characterize sources of variability in single cell transcriptome data. The examination of consistency across datasets allows visual detection of biases and outliers. Availability and implementation scRNABatchQC is freely available at https://github.com/liuqivandy/scRNABatchQC as an R package. Supplementary information Supplementary data are available at Bioinformatics online.

scholarly journals scBatch: batch-effect correction of RNA-seq data through sample distance matrix adjustment

2020 ◽  
Vol 36 (10) ◽  
pp. 3115-3123 ◽  
Author(s):  
Teng Fei ◽  
Tianwei Yu
Keyword(s):  
Single Cell ◽  
Differential Expression Analysis ◽  
Distance Matrix ◽  
Real Data ◽  
R Package ◽  
Batch Effect ◽  
Supplementary Information ◽  
Rna Seq ◽  
Sequencing Data ◽  
Gene Differential Expression

Abstract Motivation Batch effect is a frequent challenge in deep sequencing data analysis that can lead to misleading conclusions. Existing methods do not correct batch effects satisfactorily, especially with single-cell RNA sequencing (RNA-seq) data. Results We present scBatch, a numerical algorithm for batch-effect correction on bulk and single-cell RNA-seq data with emphasis on improving both clustering and gene differential expression analysis. scBatch is not restricted by assumptions on the mechanism of batch-effect generation. As shown in simulations and real data analyses, scBatch outperforms benchmark batch-effect correction methods. Availability and implementation The R package is available at github.com/tengfei-emory/scBatch. The code to generate results and figures in this article is available at github.com/tengfei-emory/scBatch-paper-scripts. Supplementary information Supplementary data are available at Bioinformatics online.

scholarly journals SPARSim single cell: a count data simulator for scRNA-seq data

2019 ◽  
Author(s):  
Giacomo Baruzzo ◽  
Ilaria Patuzzi ◽  
Barbara Di Camillo
Keyword(s):  
Single Cell ◽  
Count Data ◽  
Simulated Data ◽  
Real Data ◽  
R Package ◽  
Supplementary Information ◽  
Rna Seq ◽  
Distribution Of Zeros ◽  
New Methods ◽  
Research Fields

Abstract Motivation Single cell RNA-seq (scRNA-seq) count data show many differences compared with bulk RNA-seq count data, making the application of many RNA-seq pre-processing/analysis methods not straightforward or even inappropriate. For this reason, the development of new methods for handling scRNA-seq count data is currently one of the most active research fields in bioinformatics. To help the development of such new methods, the availability of simulated data could play a pivotal role. However, only few scRNA-seq count data simulators are available, often showing poor or not demonstrated similarity with real data. Results In this article we present SPARSim, a scRNA-seq count data simulator based on a Gamma-Multivariate Hypergeometric model. We demonstrate that SPARSim allows to generate count data that resemble real data in terms of count intensity, variability and sparsity, performing comparably or better than one of the most used scRNA-seq simulator, Splat. In particular, SPARSim simulated count matrices well resemble the distribution of zeros across different expression intensities observed in real count data. Availability and implementation SPARSim R package is freely available at http://sysbiobig.dei.unipd.it/? q=SPARSim and at https://gitlab.com/sysbiobig/sparsim. Supplementary information Supplementary data are available at Bioinformatics online.

scholarly journals SIMLR: a tool for large-scale single-cell analysis by multi-kernel learning

2017 ◽  
Author(s):  
Bo Wang ◽  
Daniele Ramazzotti ◽  
Luca De Sano ◽  
Junjie Zhu ◽  
Emma Pierson ◽  
...  
Keyword(s):  
Single Cell ◽  
Large Scale ◽  
Single Cell Analysis ◽  
R Package ◽  
Supplementary Information ◽  
Cell Analysis ◽  
Rna Seq ◽  
A Cell ◽  
Supplementary Material ◽  
Public Datasets

AbstractMotivationWe here present SIMLR (Single-cell Interpretation via Multi-kernel LeaRning), an open-source tool that implements a novel framework to learn a cell-to-cell similarity measure from single-cell RNA-seq data. SIMLR can be effectively used to perform tasks such as dimension reduction, clustering, and visualization of heterogeneous populations of cells. SIMLR was benchmarked against state-of-the-art methods for these three tasks on several public datasets, showing it to be scalable and capable of greatly improving clustering performance, as well as providing valuable insights by making the data more interpretable via better a visualization.Availability and ImplementationSIMLR is available on GitHub in both R and MATLAB implementations. Furthermore, it is also available as an R package on [email protected] or [email protected] InformationSupplementary data are available at Bioinformatics online.

scholarly journals Overcoming confounding plate effects in differential expression analyses of single-cell RNA-seq data

2016 ◽  
Author(s):  
Aaron T. L. Lun ◽  
John C. Marioni
Keyword(s):  
Single Cell ◽  
Error Control ◽  
Type I Error ◽  
Expression Profiles ◽  
Gene Expression Profiles ◽  
Simulated Data ◽  
Real Data ◽  
Type I ◽  
Rna Seq ◽  
Cell Counts

AbstractAn increasing number of studies are using single-cell RNA-sequencing (scRNA-seq) to characterize the gene expression profiles of individual cells. One common analysis applied to scRNA-seq data involves detecting differentially expressed (DE) genes between cells in different biological groups. However, many experiments are designed such that the cells to be compared are processed in separate plates or chips, meaning that the groupings are confounded with systematic plate effects. This confounding aspect is frequently ignored in DE analyses of scRNA-seq data. In this article, we demonstrate that failing to consider plate effects in the statistical model results in loss of type I error control. A solution is proposed whereby counts are summed from all cells in each plate and the count sums for all plates are used in the DE analysis. This restores type I error control in the presence of plate effects without compromising detection power in simulated data. Summation is also robust to varying numbers and library sizes of cells on each plate. Similar results are observed in DE analyses of real data where the use of count sums instead of single-cell counts improves specificity and the ranking of relevant genes. This suggests that summation can assist in maintaining statistical rigour in DE analyses of scRNA-seq data with plate effects.

Sign in / Sign up

Export Citation Format

Share Document