Automatic processing of time domain induced polarization data using supervised artificial neural networks

2020 ◽  
Vol 224 (1) ◽  
pp. 312-325
Author(s):  
Adrian S Barfod ◽  
Léa Lévy ◽  
Jakob Juul Larsen

SUMMARY Processing of geophysical data is a time consuming task involving many different steps. One approach for accelerating and automating processing of geophysical data is to look towards machine learning (ML). ML encompasses a wide range of tools, which can be used to automate complicated and/or tedious tasks. We present strategies for automating the processing of time-domain induced polarization (IP) data using ML. An IP data set from Grindsted in Denmark is used to investigate the applicability of neural networks for processing such data. The Grindsted data set consists of eight profiles, with approximately 2000 data curves per profile, on average. Each curve needs to be processed, which, using the manual approach, can take 1–2 hr per profile. Around 20 per cent of the curves were manually processed and used to train and validate an artificial neural network. Once trained, the network could process all curves, in 6–15 s for each profile. The accuracy of the neural network, when considering the manual processing as a reference, is 90.8 per cent. At first, the network could not detect outlier curves, that is where entire chargeability curves were significantly different from their spatial neighbours. Therefore, an outlier curve detection algorithm was developed and implemented to work in tandem with the network. The automatic processing approach developed here, involving the neural network and the outlier curve detection, leads to similar inversion results as the manual processing, with the two significant advantages of reduced processing times and enhanced processing consistency.

2019 ◽  
Vol 2019 (02) ◽  
pp. 89-98
Author(s):  
Vijayakumar T

Predicting the category of tumors and the types of the cancer in its early stage remains as a very essential process to identify depth of the disease and treatment available for it. The neural network that functions similar to the human nervous system is widely utilized in the tumor investigation and the cancer prediction. The paper presents the analysis of the performance of the neural networks such as the, FNN (Feed Forward Neural Networks), RNN (Recurrent Neural Networks) and the CNN (Convolutional Neural Network) investigating the tumors and predicting the cancer. The results obtained by evaluating the neural networks on the breast cancer Wisconsin original data set shows that the CNN provides 43 % better prediction than the FNN and 25% better prediction than the RNN.


2019 ◽  
Author(s):  
Daniel Cleather

Musculoskeletal models have been used to estimate the muscle and joint contact forces expressed during movement. One limitation of this approach, however, is that such models are computationally demanding, which limits the possibility of using them for real-time feedback. One solution to this problem is to train a neural network to approximate the performance of the model, and then to use the neural network to give real-time feedback. In this study, neural networks were trained to approximate the FreeBody musculoskeletal model for jumping and landing tasks. The neural networks were better able to approximate jumping than landing, which was probably a result of the greater variability in the landing data set used in this study. In addition, a neural network that was based on a reduced set of inputs was also trained to approximate the outputs of FreeBody during a landing task. These results demonstrate the feasibility of using neural networks to approximate the results of musculoskeletal models in order to provide real-time feedback. In addition, these neural networks could be based upon a reduced set of kinematic variables taken from a 2-dimensional video record, making the implementation of mobile applications a possibility.


2020 ◽  
Vol 44 (6) ◽  
pp. 923-930
Author(s):  
I.A. Rodin ◽  
S.N. Khonina ◽  
P.G. Serafimovich ◽  
S.B. Popov

In this work, we carried out training and recognition of the types of aberrations corresponding to single Zernike functions, based on the intensity pattern of the point spread function (PSF) using convolutional neural networks. PSF intensity patterns in the focal plane were modeled using a fast Fourier transform algorithm. When training a neural network, the learning coefficient and the number of epochs for a dataset of a given size were selected empirically. The average prediction errors of the neural network for each type of aberration were obtained for a set of 15 Zernike functions from a data set of 15 thousand PSF pictures. As a result of training, for most types of aberrations, averaged absolute errors were obtained in the range of 0.012 – 0.015. However, determining the aberration coefficient (magnitude) requires additional research and data, for example, calculating the PSF in the extrafocal plane.


2017 ◽  
Vol 28 (3-4) ◽  
pp. 55-71
Author(s):  
V. R. Cherlіnka

The maіn objectіve was to study the іnfluence of the traіnіng dataset on the qualіtatіve characterіstіcs of sіmulatіve soіl maps, whіch are obtaіned through sіmulatіon usіng a typіcal set of materіals that can be potentіally avaіlable for the soіl scіentіst іn modern Ukraіnіan realіtіes. Achіevement of thіs goal was achіeved by solvіng a number of the followіng tasks: a) dіgіtіzіng of cartographіc materіals; b) creatіng DEM wіth a resolutіon equal to 10 m; c) analysіs of dіgіtal elevatіon models and extractіon of land surface parameters; d) generatіon of traіnіng datasets accordіng to the descrіbed methodologіcal approaches; e) creatіon sіmulatіon models of soіl-cover іn R-statіstіc; g) analysіs of the obtaіned results and conclusіons regardіng the optіmal sіze of the traіnіng datasets for predіctіve modelіng of the soіl cover and іts duratіon. As an object was selected a fragment of the terrіtory of Ukraіne (4200×4200 m) wіthіn the lіmіts of Glybotsky dіstrіct of the Chernіvtsі regіon, confіned to the Prut-Sіret іnterfluve (North Bukovyna) wіth contrast geomorphologіcal condіtіons. Thіs area has dіfferent admіnіstratіve subordіnatіon and economіc use but іs covered wіth soіl cartographіc materіals only by 49.43 %. For data processіng were used іnstrumental possіbіlіtіes of free software: geo- rectіfіcatіons of maps materіal – GІS Quantum, dіgіtalіzatіon – Easy Trace, preparatіon of maps morphometrіc parameters – GRASS GІS and buіldіng sіmulatіve soіl maps – R, a language and envіronment for statіstіcal computіng. To create sіmulatіon models of soіl cover, a R-statіstіc scrіpt was wrіtten that іncludes a number of adaptatіons for solvіng set tasks and іmplements the dіfferent types of predіcatіve algorіthms such as: Multіnomіal Logіstіc Regressіon, Decіsіon Trees, Neural Networks, Random Forests, K-Nearest Neіghbors, Support Vector Machіnes and Bagged Trees. To assess the qualіty of the obtaіned models, the Cohen’s Kappa Іndex (?) was used whіch best represents the degree of complіance between the orіgіnal and the sіmulated data. As a benchmark, the usual medіal axes traіnіng dataset of was used. Other study optіons were: medіan-weіghted and randomіzed-weіghted samplіng. Thіs together wіth 7 predіcatіve algorіthms allowed to get 72 soіl sіmulatіons, the analysіs of whіch revealed quіte іnterestіng patterns. Models rankіng by іncreasіng the qualіty of the predіctіon by the kappa of the maіn data set shown, that the MLR algorіthm showed the worst results among others. Next іn ascendіng order are Neural Network, SVM, KNN, BGT, RF, DT. The last three algorіthms refer to the classіfіcatіon and theіr hіgh results іndіcate the greatest suіtabіlіty of such approaches іn sіmulatіon of soіl cover. The sample based on the weіghted medіan dіd not show strong advantages over others, as the results are quіte controversіal. Only іn the case of the neural network and the Bugget Trees the results of the medіan-weіghted sample predіctіon showed a better result vs a sіmple medіan sample and much worse than any varіants of randomіzed traіnіng data. Other algorіthms requіred a dіfferent number of randomіzed poіnts to cross the 90 % kappa: KNN – 25 %; BGT, RF and DT – 90 %. To achіeve 95 % kappa BGT algorіthm requіres 30% traіnіng poіnts of the total, RF – 25 % and DT – 20 %. Decіsіon Trees as a result turned out to be the most powerful algorіthm, whіch was able to sіmulate the dіstrіbutіon of soіl abnormalіtіes from kappa 97.13 % wіth 35 % saturatіon of the traіnіng sample wіth the orіgіnal data. Overall, DT shows a great dіfference between the approaches to selectіng traіnіng data: any medіan falls by 13 % іn front of a sіmple 5 % randomіzed-weіghted set of traіnіng cells and 22 % – about 35 % of the set.


Author(s):  
Metin DEMIRTAS ◽  
Musa ALCI

The aim of this paper is to compare the neural network and fuzzy modeling approaches on a nonlinear system. We have taken Permanent Magnet Brushless Direct Current (PMBDC) motor data and have generated models using both approaches. The predictive performance of both methods was compared on the data set for model configurations.The paper describes the results of these tests and discusses the effects of changing model parameters on predictive and practical performance. Modeling sensitivity was used to compare for two methods. 


2020 ◽  
Vol 44 (6) ◽  
pp. 968-977
Author(s):  
M.O. Kalinina ◽  
P.L. Nikolaev

Nowadays deep neural networks play a significant part in various fields of human activity. Especially they benefit spheres dealing with large amounts of data and lengthy operations on obtaining and processing information from the visual environment. This article deals with the development of a convolutional neural network based on the YOLO architecture, intended for real-time book recognition. The creation of an original data set and the training of the deep neural network are described. The structure of the neural network obtained is presented and the most frequently used metrics for estimating the quality of the network performance are considered. A brief review of the existing types of neural network architectures is also made. YOLO architecture possesses a number of advantages that allow it to successfully compete with other models and make it the most suitable variant for creating an object detection network since it enables some of the common disadvantages of such networks to be significantly mitigated (such as recognition of similarly looking, same-color book coves or slanted books). The results obtained in the course of training the deep neural network allow us to use it as a basis for the development of the software for book spine recognition.


2019 ◽  
Vol 2019 (02) ◽  
pp. 89-98 ◽  
Author(s):  
Vijayakumar T

Predicting the category of tumors and the types of the cancer in its early stage remains as a very essential process to identify depth of the disease and treatment available for it. The neural network that functions similar to the human nervous system is widely utilized in the tumor investigation and the cancer prediction. The paper presents the analysis of the performance of the neural networks such as the, FNN (Feed Forward Neural Networks), RNN (Recurrent Neural Networks) and the CNN (Convolutional Neural Network) investigating the tumors and predicting the cancer. The results obtained by evaluating the neural networks on the breast cancer Wisconsin original data set shows that the CNN provides 43 % better prediction than the FNN and 25% better prediction than the RNN.


Author(s):  
Olfa Haj Mahmoud ◽  
Charles Pontonnier ◽  
Georges Dumont ◽  
Stéphane Poli ◽  
Franck Multon

Objective A neural networks approach has been proposed to handle various inputs such as postural, anthropometric and environmental variables in order to estimate self-reported discomfort in picking tasks. An input reduction method has been proposed, reducing the input variables to the minimum data required to estimate self-reported discomfort with similar accuracy as the neural network fed with all variables. Background Previous works have attempted to explore the relationship between several factors and self-reported discomfort using observational methods. The results showed that this relationship was not a simple linear relationship. Another study used neural networks to model the function returning reported discomfort according to static posture, age, and anthropometrics variables. The results demonstrated the model’s ability to predict reported discomfort. But all the available variables were used to design the neural network. Method Eleven subjects carried-out picking tasks with various masses (0, 1, 3 kg) and imposed duration (5, 10, or 15 s). Continuous REBA score, anthropometric and environmental data were computed, and subjects’ discomfort were collected. The data set of this work consisted in the computed continuous REBA score, anthropometric, environmental data and collected subjects’ discomfort. Results The results showed that the correlation between the estimated and experimental tested data was equal to 0.775 when using all the 14 available variables. After data reduction, only 6 variables were left, with a very close performance when predicting discomfort. Conclusion A neural network approach has been proposed to estimate self-reported discomfort according to a minimum set of postural, anthropometric and environmental variables in picking tasks. Application This method has the potential to support ergonomists in workstation designing processes, by adding discomfort prediction to virtual manikins’ behaviors in simulation tools.


Vestnik MEI ◽  
2021 ◽  
Vol 3 (3) ◽  
pp. 103-109
Author(s):  
Andrey I. Mamontov ◽  

In solving the classification problem, a fully connected trainable neural network (with adjusting the parameters represented by double-precision real numbers) is used as a mathematical model. After the training is completed, the neural network parameters are rounded and represented as fixed-point numbers (integers). The aim of the study is to reduce the required amount of the computing system memory for storing the obtained integer parameters. To reduce the amount of memory, the following methods for storing integer parameters are developed, which are based on representing the linear polynomials included in a fully connected neural network using compositions of simpler functions: - a method based on representing the considered polynomial as a sum of simpler polynomials; - a method based on separately storing the information about additions and multiplications. In the experiment with the MNIST data set, it took 1.41 MB to store real parameters of a fully connected neural network, 0.7 MB to store integer parameters without using the proposed methods, 0.47 MB in the RAM and 0.3 MB in compressed form on the disk when using the first method, and 0.25 MB on the disk when using the second method. In the experiment with the USPS data set, it took 0.25 MB to store real parameters of a fully connected neural network, 0.1 MB to store integer parameters without using the proposed methods, 0.05 MB in the RAM and approximately the same amount in compressed form on the disk when using the first method, and 0.03 MB on the disk when using the second method. The study results can be applied in using fully connected neural networks to solve various recognition problems under the conditions of limited hardware capacities.


Author(s):  
A.М. Заяц ◽  
С.П. Хабаров

Рассматривается процедура выбора структуры и параметров нейронной сети для классификации набора данных, известного как Ирисы Фишера, который включает в себя данные о 150 экземплярах растений трех различных видов. Предложен подход к решению данной задачи без использования дополнительных программных средств и мощных нейросетевых пакетов с использованием только средств стандартного браузера ОС. Это потребовало реализации ряда процедур на JavaScript c их подгрузкой в разработанную интерфейсную HTML-страницу. Исследование большого числа различных структур многослойных нейронных сетей, обучаемых на основе алгоритма обратного распространения ошибки, позволило выбрать для тестового набора данных структуру нейронной сети всего с одним скрытым слоем из трех нейронов. Это существенно упрощает реализацию классификатора Ирисов Фишера, позволяя его оформить в виде загружаемой с сервера HTML-страницы. The procedure for selecting the structure and parameters of the neural network for the classification of a data set known as Iris Fisher, which includes data on 150 plant specimens of three different species, is considered. An approach to solving this problem without using additional software and powerful neural network packages using only the tools of the standard OS browser is proposed. This required the implementation of a number of JavaScript procedures with their loading into the developed HTML interface page. The study of a large number of different structures of multilayer neural networks, trained on the basis of the back-propagation error algorithm, made it possible to choose the structure of a neural network with only one hidden layer of three neurons for a test dataset. This greatly simplifies the implementation of the Fisher Iris classifier, allowing it to be formatted as an HTML page downloaded from the server.


Sign in / Sign up

Export Citation Format

Share Document