Susceptibility of Strawberries, Blackberries, and Cherries to Aspergillus Mold Growth and Aflatoxin Production

1982 ◽  
Vol 65 (3) ◽  
pp. 659-664 ◽  
Author(s):  
Gerald C Llewellyn ◽  
Thomas Eadie ◽  
William V Dashek
Keyword(s):  
Acetic Acid ◽  
Thin Layer ◽  
Thin Layer Chromatography ◽  
Mycelial Growth ◽  
Methylene Chloride ◽  
Aflatoxin Production ◽  
Solvent System ◽  
Mold Growth ◽  
Tlc Plates ◽  
Layer Chromatography

Abstract The susceptibility of blackberries, cherries, and strawberries to Aspergillus growth and aflatoxin production has been examined. Three aflatoxigenic isolates of Aspergillus, A. flavus ATCC 15548 and NRRL 3251 as well as A. parasiticus NRRL 2999, were cultured on homogenates of the fruits for 14 days at 28 ± 2°C. Percent mycelial growth and spore infestation were determined each day with a calibrated grid. At day 14 each culture was frozen at –5°C until aflatoxins were extracted with methylene chloride and water. Aflatoxins were separated by thin layer chromatography (TLC) with benzene-methanol-acetic acid (90 + 5 + 5). This extraction and solvent system provided satisfactory separations of the aflatoxins and was free of background interference on the TLC plates. Although all fruits served as substrates for both Aspergillus growth and aflatoxin production, cherries appeared to be a more favorable substrate than did blackberries, and the latter was more favorable than strawberries. Whereas A. flavus produced both B1 and G1 on all substrates, it yielded B2 and G2 only on cherries. Although A. parasiticus NRRL 2999 synthesized B1, B2, G1, and G2 on both blackberries and cherries, no aflatoxins were detected on strawberries. In contrast, A. flavus NRRL 3251 failed to produce detectable levels of aflatoxin on any substrate. All substrates supported both mycelial growth and subsequent sporulation with cherries > blackberries > strawberries.

Simplified Qualitative Analysis of Glycerides Derived from Coconut Oil Using Thin Layer Chromatography

2012 ◽  
Vol 506 ◽  
pp. 182-185 ◽  
Author(s):  
Sirikarn Pengon ◽  
Chutima Limmatvapirat ◽  
Sontaya Limmatvapirat
Keyword(s):  
Acetic Acid ◽  
Qualitative Analysis ◽  
Thin Layer ◽  
Thin Layer Chromatography ◽  
Cocos Nucifera ◽  
Coconut Oil ◽  
Solvent System ◽  
Tlc Plates ◽  
Solvent Systems ◽  
Layer Chromatography

Coconut (Cocos nucifera L.) oil is composed predominately of medium-chain triglycerides which have been reported to be beneficial to human health. It also contains free fatty acids (FFAs) which can combine with glycerol to form monoglycerides, diglycerides, and triglycerides. The analysis of FFAs and their glycerides has been proposed to assess the quality of coconut oil used as raw materials in various industrial fields. The aim of this study was to develop the qualitative method for investigation of FFA and their glycerides in coconut oil using thin layer chromatography (TLC). Coconut oil and standards of FFA and their glycerides were chromatographed separately on Silica gel 60 F254 TLC plates using hexane: ether: acetic acid (60:40:1) and hexane: ethyl acetate: acetic acid (60:40:0.5) as solvent systems A and B, respectively. The spots on developing TLC plates were detected and compared using 254-nm UV light and iodine vapor. The results showed that the resolution of solvent system A was better than that of solvent system B. However, both solvent systems were used to confirm the results. The retention factor (Rf) values of the components were in good agreement with their polarity. This method should provide a guideline for qualitative analysis of coconut oil.

EXPERIMENTAL PRODUCTION OF AFLATOXIN ON BRICK CHEESE1

1972 ◽  
Vol 35 (10) ◽  
pp. 585-587 ◽  
Author(s):  
C. N. Shih ◽  
E. H. Marth
Keyword(s):  
Thin Layer ◽  
Thin Layer Chromatography ◽  
Aspergillus Flavus ◽  
Aspergillus Parasiticus ◽  
Solvent System ◽  
Experimental Production ◽  
Mold Growth ◽  
Layer Chromatography ◽  
Plastic Containers ◽  
Chloroform Methanol

Brick cheese was placed in plastic containers and all surfaces except the top were sealed with wax. The top was inoculated with Aspergillus flavus or Aspergillus parasiticus and cheese was incubated in a humid chamber at 7.2, 12.8, and 23.9 C for up to 14 weeks after mold growth was evident. After incubation each cheese was cut horizontally into four layers, each approximately 1 cm thick. Each layer of cheese was extracted with a monophasic-biphasic solvent system (chloroform, methanol, and water). The extract was purified, concentrated, and aflatoxins were measured by thin-layer chromatography and fluorometry. No aflatoxins were produced by either mold at 7.2 C. At 12.8 C, A. parastticus developed aflatoxins B1 and G1 after 1 week of incubation. Aflatoxin produced by this mold persisted through 4 weeks of storage and then was not detectable. Aspergillus flavus did not form aflatoxin at 12.8 C. Both molds produced aflatoxin on cheese at 23.9 C; A. parasiticus did so after 1 week and A. flavus after 14 weeks. In some instances, aflatoxin was found in cheese 4 cm from the surface. It is reasonable to assume that cheese will not become contaminated with aflatoxin if the food is held at or below 7 C.

Simplified Method for Microscale Production and Quantification of Aflatoxin in Broth1

1984 ◽  
Vol 47 (7) ◽  
pp. 526-529 ◽  
Author(s):  
WEI-YUN J. TSAI ◽  
JIMMY D. LAMBERT ◽  
LLOYD B. BULLERMAN
Keyword(s):  
Solvent Extraction ◽  
Thin Layer ◽  
Thin Layer Chromatography ◽  
Frozen Storage ◽  
Aflatoxin Production ◽  
Production Studies ◽  
Simplified Method ◽  
Tlc Plates ◽  
Layer Chromatography ◽  
Yeast Extract Sucrose

A simplified method for aflatoxin production studies is described. The mold was cultured in 4-dram (15 ml) vials containing 5 ml of yeast extract sucrose broth, and aflatoxin levels were determined by direct spotting of the broth on thin layer chromatography (TLC) plates and quantitating by spectrodensitometry. Equivalent levels of aflatoxins were produced in vials as compared to flasks. When compared to conventional TLC after solvent extraction, direct spotting was rapid, economical and statistically equivalent. Heating broth cultures (121°C, 15 s) before TLC improved the release of aflatoxin from mycelial mats. Aflatoxins were unstable in YES broth during 3 months of frozen storage.

Separation of dl-2-(3-Phenoxyphenyl) propionic Acid (Fenoprofen) From Its Intermediates by Thin Layer Chromatography

1973 ◽  
Vol 56 (3) ◽  
pp. 656-658
Author(s):  
Rafik H Bishara
Keyword(s):  
Acetic Acid ◽  
Thin Layer ◽  
Thin Layer Chromatography ◽  
Lower Limit ◽  
Raw Material ◽  
Chemical Constitution ◽  
Tlc Plates ◽  
Rf Values ◽  
Synthetic Intermediates ◽  
Layer Chromatography

Abstract Fenoprofen and its synthetic intermediates are resolved on silica gel F254 TLC plates developed with chloroform-acetic acid (98+2). The interrelationship between the chemical constitution and the Rf values is discussed. The lower limit of detecting the intermediates in Fenoprofen raw material is 1%.

OPTIMIZATION OF THIN LAYER CHROMATOGRAPHY METHODS FOR SEPARATION AND IDENTIFICATION OF ANTIDEPRESSANTS IN THEIR MIXTURE

2014 ◽  
Vol 21 (1) ◽  
pp. 11-15
Author(s):  
Daiva Kazlauskienė ◽  
Guoda Kiliuvienė ◽  
Palma Nenortienė ◽  
Giedrė Kasparavičienė ◽  
Ieva Matukaitytė
Keyword(s):  
Thin Layer ◽  
Thin Layer Chromatography ◽  
Solvent System ◽  
Ammonia Solution ◽  
Relative Standard ◽  
Rf Values ◽  
Solvent Systems ◽  
Paroxetine Hydrochloride ◽  
Fluvoxamine Maleate ◽  
Layer Chromatography

By conducting the toxicological analysis it is meaningful to determine the analytical system that could identify simultaneously several medicinal preparations quickly and precisely. The purpose of this work was to create and validate the method of thin-layer chromatography that would be suitable to separate the components of antidepressant mixture (amitriptyline hydrochloride, paroxetine hydrochloride, sertraline hydrochloride, fluvoxamine maleate and buspirone hydrochloride) and to identify them. The system was validated with regard to the sensitivity, repetition of data, resistance and particularity. The solvent systems with potential of high separation of components in their mixture were created: acetonitrile, methanol, ammonia solution 25 percent (85:10:5); acetonitrile, methanol, ammonia solution 25 percent (75:20:5); dichlormethane, 1,4-dioxane, ammonia solution 25 percent (50:45:5); dichlormethane, 1,4-dioxane, ammonia solution 25 percent (42:55:3); trichlormethane, 1,4-dioxane, ammonia solution 25 percent (25:70:5); trichlormethane, 1,4-dioxane, ammonia solution 25 percent (60:36:4). One of the most suitable solvent systems for separation of the analyzed mixture (sertraline, amitriptyline, paroxetine, buspirone, fluvoxamine) was determined – acetonitrile, methanol, ammonia solution 25 percent (85:10:5). When this solvent system was used, the average Rf values of the analyzed compounds differed the most. Validation was conducted – the relative standard deviation (RSD, percent) of the average Rf value of the analyzed compounds varied from 0,6 to 1,8 percent and did not exceed the permissible error of 5 percent. The sensitivity of methodology was determined by assessing the intensity of the mixture’s spots on the chromatographic plate. The detection limit of buspirone was 0,0012 µg; sertraline – 0,0008 µg; amitriptyline – 0,0004 µg; fluvoxamine – 0,0004 µg; paroxetine – 0,0008 µg. The resistance of results to the changed conditions – it was determined that when the amounts of the solvents acetonitrile and methanol were increased or decreased to two milliliters, the average Rf values of the analyzed compounds did not change statistically significantly

scholarly journals A validated quantification of triclosan in toothpaste using high-performance thin-layer chromatography and a 48-bit fatbed scanner

2021 ◽  
Author(s):  
Barbara Anders ◽  
Sabrina Doll ◽  
Bernd Spangenberg
Keyword(s):  
Acetic Acid ◽  
Thin Layer ◽  
Thin Layer Chromatography ◽  
High Performance ◽  
Detection System ◽  
Flatbed Scanner ◽  
Butyl Ether ◽  
Quantification Method ◽  
Direct Measurements ◽  
Layer Chromatography

AbstractWe present a densitometric quantification method for triclosan in toothpaste, separated by high-performance thin-layer chromatography (HPTLC) and using a 48-bit flatbed scanner as the detection system. The sample was band-wise applied to HPTLC plates (10 × 20 cm), with fluorescent dye, Merck, Germany (1.05554). The plates were developed in a vertical developing chamber with 20 min of chamber saturation over 70 mm, using n-heptane–methyl tert-butyl ether–acetic acid (92:8:0.1, V/V) as solvent. The RF value of triclosan is hRF = 22.4, and quantification is based on direct measurements using an inexpensive 48-bit flatbed scanner for color measurements (in red, green, and blue) after plate staining with 2,6-dichloroquinone-4-chloroimide (Gibbs' reagent). Evaluation of the red channel makes the measurements of triclosan very specific. For linearization, an extended Kubelka–Munk expression was used for data transformation. The range of linearity covers more than two orders of magnitude and is between 91 and 1000 ng. The separation method is inexpensive, fast and reliable.

DEVELOPMENT OF HPTLC METHOD FOR THE ESTIMATION OF ONDANSETRON AND RANITIDINE IN COMBINED DOSAGE FORM

INDIAN DRUGS ◽  
2015 ◽  
Vol 52 (12) ◽  
pp. 42-48
Author(s):  
P. J. Patel ◽  
◽  
D. A Shah ◽  
F. A. Mehta ◽  
U. K. Chhalotiya
Keyword(s):  
Thin Layer ◽  
Stationary Phase ◽  
Thin Layer Chromatography ◽  
Silica Gel ◽  
High Performance ◽  
Dosage Form ◽  
Solvent System ◽  
Rf Values ◽  
Layer Chromatography ◽  
Hptlc Method

A simple, sensitive and precise high performance thin layer chromatographic (HPTLC)method has been developed for the estimation of ondansetron (OND) and ranitidine (RAN) in combination. The method was employed on thin layer chromatography (TLC) and aluminium plates were precoated with silica gel 60 F254 as the stationary phase, while the solvent system was methanol. The Rf values were observed to be 0.5 ± 0.02, and 0.3 ± 0.02 for OND and RAN, respectively. The separated spots were densitometrically analyzed in absorbance mode at 299 nm. This method was linear in the range of 25-300 ng/band for OND and 50-600 ng/band for RAN. The limits of detection for OND and RAN were found to be 3.47 and 1.83 ng/band, respectively. The limits of quantification for OND and RAN were found to be 10.53 and 5.55 ng/band, respectively. The proposed method was validated with respect to linearity, accuracy, precision and robustness. The method was successfully applied to the estimation of OND and RAN in combined dosage form.

scholarly journals Quantitative Analysis of Sulpiride and Impurities of 2-Aminomethyl-1-Ethylpyrrolidine and Methyl-5-Sulphamoyl-2-Methoxybenzoate in Pharmaceuticals by High-Performance Thin-Layer Chromatography and Scanning Densitometry

1999 ◽  
Vol 82 (4) ◽  
pp. 825-829 ◽  
Author(s):  
Danica Agbaba ◽  
Tatjana Miljkovic ◽  
Valentina Marinkovic ◽  
Dobrila Zivanov-Stakic ◽  
Sote Vladimirov
Keyword(s):  
Quantitative Analysis ◽  
Thin Layer ◽  
High Performance ◽  
Methylene Chloride ◽  
Solvent System ◽  
Ammonia Solution ◽  
Dosage Forms ◽  
Raw Material ◽  
Layer Chromatography

Abstract A simple and reliable thin-layer chromatographic method for determining sulpiride and impurities of 2-aminomethyl-1-ethylpyrrolidine and methyl-5-sulphamoyl-2-methoxybenzoate was developed and validated. A methylene chloride–methanol–ammonia solution (25%; 18 + 2.8 + 0.4, v/v) solvent system is used for separation and quantitative evaluation of chromatograms. The chromatographic plate is first scanned at 240 nm to locate chromatographic zones corresponding to sulpiride and methyl-5-sulphamoyl-2-methoxybenzoate. Then 2-aminomethyl-1-ethylpyrrolidine is derivatized in situ with ninhydrin, and resulting colored spots are measured at 500 nm. The method is reproducible and convenient for quantitative analysis and purity control of sulpiride in its raw material and in its dosage forms.

Notizen: Improved 2,4-Dinitrophenylhydrazine, Thin Layer Chromatography Methods for the Determination of Micro- and Macroamounts of Ascorbic Acid

1974 ◽  
Vol 29 (11-12) ◽  
pp. 777-780 ◽  
Author(s):  
A. Navon ◽  
H. Z. Levinson
Keyword(s):  
Acetic Acid ◽  
Vitamin C ◽  
Thin Layer ◽  
Condensation Reaction ◽  
Dehydroascorbic Acid ◽  
Previous Method ◽  
Aqueous Acetic Acid ◽  
Tlc Plates ◽  
Layer Chromatography

Microamounts of vitamin C could be readily determined in 20 μl-samples using the 2,4-dinitrophenylhydrazine method together with separation by thin layer chromato­graphy. The condensation reaction was carried out for 5 min at 100 °C on a glass fibre disc. Purification of vitamin C hydrazones was accomplished by repeated separation on TLC plates. An aqueous solution of 65% acetic acid was em­ployed to dissolve the vitamin C hydrazones, providing maxi­mal absorbance at 500 nm. The minimum amount detectable by this method is 0.4 μg of dehydroascorbic acid. The macrodetermination of vitamin C was improved by simpli­fying a previous method and employing 65% aqueous acetic acid as a solvent for the hydrazones.

Sign in / Sign up

Export Citation Format

Share Document