Determination of Fish Core Content in Coated Products: Interlaboratory WEFTA Studies of Three Procedures

1986 ◽  
Vol 69 (1) ◽  
pp. 75-79
Author(s):  
Johannes Bon ◽  
Kerst K Brünner ◽  
Angus Aitken
Keyword(s):  
Gadus Morhua ◽  
Fish Products ◽  
Pleuronectes Platessa ◽  
Core Content ◽  
Aoac Method ◽  
Better Than ◽  
West European

Abstract Four collaborative trials are described in which 3 different methods for the estimation of fish content of coated products were compared to determine their suitability. The methods are a modified version of AOAC method 18.003, an alternative “scraping” method, and a “soaking” method. Seven West European laboratories participated in this collaborative exercise, which was performed on 4 types of coated fish products: raw coated portions of cod (Gadus morhua), partly cooked cod sticks, raw fillets of plaice (Pleuronectes platessa), and partly cooked plaice fillets. The results indicate that precooking strongly affected fish recovery by all 3 methods. Regular portions (of cod) gave higher recoveries than irregular shaped fillets (of plaice). The results do not lead to the conclusion that any method was better than the others.

Collaborative Study of Accuracy and Precision of Rapid Determination of Fat in Meat and Meat Products by Foss-Let Method

1977 ◽  
Vol 60 (4) ◽  
pp. 853-858 ◽  
Author(s):  
Julio D Pettinati ◽  
Clifton E Swift
Keyword(s):  
Food Industry ◽  
Rapid Determination ◽  
Collaborative Study ◽  
Meat Products ◽  
T Test ◽  
Laboratory Sample ◽  
Accuracy And Precision ◽  
Aoac Method ◽  
Better Than

Abstract Collaborators in 12 meat and food industry laboratories performed 4 fat determinations each on 7 samples of meat and meat products by the rapid (7–10 min) Foss-Let method and compared the results with those obtained by AOAC method 24.005(a) or 24.005(b). From the overall mean of results on all samples, determinations by the Foss-Let method averaged 0.11% fat higher than by the AOAC method. This difference was not significant by the t-test (P = 0.05), which indicated agreement between the compared methods in determining fat content. Precision of the Foss-Let method was equivalent to and generally slightly better than that of the AOAC method. Standard deviations with the Foss-Let method were 0.2 % fat for between-duplicates and for within-laboratory repeatability; 0.4% fat for between-laboratories, including variation due to laboratory-sample interaction; and 0.5% fat for reproducibility between analysts in different laboratories. The Foss-Let method has been adopted as official first action.

Time and Latitude in South Africa

1972 ◽  
Vol 1 ◽  
pp. 27-38
Author(s):  
J. Hers
Keyword(s):  
South Africa ◽  
Cape Town ◽  
Astronomical Observations ◽  
Royal Observatory ◽  
The Republic ◽  
Astronomical Determination ◽  
Limited Accuracy ◽  
Better Than

In South Africa the modern outlook towards time may be said to have started in 1948. Both the two major observatories, The Royal Observatory in Cape Town and the Union Observatory (now known as the Republic Observatory) in Johannesburg had, of course, been involved in the astronomical determination of time almost from their inception, and the Johannesburg Observatory has been responsible for the official time of South Africa since 1908. However the pendulum clocks then in use could not be relied on to provide an accuracy better than about 1/10 second, which was of the same order as that of the astronomical observations. It is doubtful if much use was made of even this limited accuracy outside the two observatories, and although there may – occasionally have been a demand for more accurate time, it was certainly not voiced.

Determination of trace concentrations of copper by FIA-FAAS after preconcentration on chelating sorbents

1989 ◽  
Vol 54 (7) ◽  
pp. 1785-1794 ◽  
Author(s):  
Vlastimil Kubáň ◽  
Josef Komárek ◽  
Zbyněk Zdráhal
Keyword(s):  
Sampling Frequency ◽  
Copper Determination ◽  
Flow Rates ◽  
Sample Injection ◽  
Injection Flow ◽  
Chelating Sorbents ◽  
Set Up ◽  
Trace Concentrations ◽  
Better Than

A FIA-FAAS apparatus containing a six-channel sorption equipment with five 3 x 26 mm microcolumns packed with Spheron Oxin 1 000, Ostsorb Oxin and Ostsorb DTTA was set up. Combined with sorption from 0.002M acetate buffer at pH 4.2 and desorption with 2M-HCl, copper can be determined at concentrations up to 100, 150 and 200 μg l-1, respectively. For sample and eluent flow rates of 5.0 and 4.0 ml min-1, respectively, and a sample injection time of 5 min, the limit of copper determination is LQ = 0.3 μg l-1, repeatability sr is better than 2% and recovery is R = 100 ± 2%. The enrichment factor is on the order of 102 and is a linear function of time (volume) of sample injection up to 5 min and of the sample injection flow rate up to 11 ml min-1 for Spheron Oxin 1 000 and Ostsorb DTTA. For times of sorption of 60 and 300 s, the sampling frequency is 70 and 35 samples/h, respectively. The parameters of the FIA-FAAS determination (acetylene-air flame) are comparable to or better than those achieved by ETA AAS. The method was applied to the determination of traces of copper in high-purity water.

scholarly journals Measuring the quartic Higgs self-coupling at a multi-TeV muon collider

2020 ◽  
Vol 2020 (9) ◽  
Author(s):  
M. Chiesa ◽  
F. Maltoni ◽  
L. Mantani ◽  
B. Mele ◽  
F. Piccinini ◽  
...  
Keyword(s):  
Higgs Boson ◽  
Center Of Mass ◽  
Mass Energy ◽  
Simple Analysis ◽  
Proton Proton ◽  
Coupling Interaction ◽  
Center Of Mass Energy ◽  
Muon Collider ◽  
Better Than

Abstract Measuring the shape of the Higgs boson potential is of paramount importance, and will be a challenging task at current as well as future colliders. While the expectations for the measurement of the trilinear Higgs self-coupling are rather promising, an accurate measurement of the quartic self-coupling interaction is presently considered extremely challenging even at a future 100 TeV proton-proton collider. In this work we explore the sensitivity that a muon collider with a center of mass energy in the multi-TeV range and luminosities of the order of 1035cm−2s−1, as presently under discussion, might provide, thanks to a rather large three Higgs-boson production and to a limited background. By performing a first and simple analysis, we find a clear indication that a muon collider could provide a determination of the quartic Higgs self-coupling that is significantly better than what is currently considered attainable at other future colliders.

scholarly journals Performance of the SoLid reactor neutrino detector

2019 ◽  
Vol 219 ◽  
pp. 08003
Author(s):  
Maja Verstraeten
Keyword(s):  
Quality Control ◽  
Energy Resolution ◽  
Neutrino Detector ◽  
Channel Response ◽  
In Situ Calibration ◽  
Reactor Neutrino ◽  
Li Isotope ◽  
Better Than

The SoLid Collaboration is currently operating a 1.6 ton neutrino detector near the Belgian BR2 reactor. Its main goal is the observation of the oscillation of electron antineutrinos to previously undetected flavour states. The highly segmented SoLid detector employs a compound scintillation technology based on PVT scintillator in combination with LiF-ZnS(Ag) screens containing the 6Li isotope. The experiment has demonstrated a channel-to-channel response that can be controlled to the level of a few percent, an energy resolution of better than 14% at 1 MeV, and a determination of the interaction vertex with a precision of 5 cm. This contribution highlights the major outcomes of the R&D program, the quality control during component manufacture and integration, the current performance and stability of the full-scale system, as well as the in-situ calibration of the detector with various radioactive sources.

Comparison of Methods for Determining Biuret in Urea

1979 ◽  
Vol 62 (1) ◽  
pp. 153-159
Author(s):  
Luis F Corominas ◽  
Victor M Boy ◽  
Manuel Guijosa
Keyword(s):  
Atomic Absorption ◽  
Spectrophotometric Determination ◽  
Atomic Absorption Spectrophotometry ◽  
International Organization ◽  
Comparison Of Methods ◽  
Definite Advantage ◽  
Absorption Spectrophotometry ◽  
Alternative Procedures ◽  
Aoac Method

Abstract The official first action AOAC method for the spectrophotometric determination of biuret in urea, 2.072—2.074, was compared with official first action AOAC method 2.C01-2.C03 (atomic absorption spectrophotometry), 2 simplified versions of 2.072-2.074, and modified versions of 2 alternative procedures of the International Organization for Standardization. Three synthetic urea samples (0.3, 1.4, and 3.0% biuret) and 1 commercial urea sample (1.0% biuret) were analyzed. The methods proved to be equivalent and none showed a definite advantage over 2.072-2.074. The purification of biuret and the interference by ammonia are also discussed.

scholarly journals The Application of Baum-Welch Algorithm in Multistep Attack

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Yanxue Zhang ◽  
Dongmei Zhao ◽  
Jinxing Liu
Keyword(s):  
Markov Model ◽  
Hidden Markov Model ◽  
Hidden Markov Models ◽  
Viterbi Algorithm ◽  
Markov Models ◽  
Hidden Markov ◽  
Simulation Experiments ◽  
Forward Algorithm ◽  
Better Than

The biggest difficulty of hidden Markov model applied to multistep attack is the determination of observations. Now the research of the determination of observations is still lacking, and it shows a certain degree of subjectivity. In this regard, we integrate the attack intentions and hidden Markov model (HMM) and support a method to forecasting multistep attack based on hidden Markov model. Firstly, we train the existing hidden Markov model(s) by the Baum-Welch algorithm of HMM. Then we recognize the alert belonging to attack scenarios with the Forward algorithm of HMM. Finally, we forecast the next possible attack sequence with the Viterbi algorithm of HMM. The results of simulation experiments show that the hidden Markov models which have been trained are better than the untrained in recognition and prediction.

Sign in / Sign up

Export Citation Format

Share Document