Study on the heterogeneous material coupling connection characteristics and mechanical strength of Oratosquilla oratoria mantis shrimp saddle

Microscopy ◽  
2021 ◽  
Author(s):  
Yunhong Liang ◽  
Hao Zhang ◽  
Qian Zhao ◽  
Zhaohua Lin ◽  
Zhihui Zhang ◽  
...  

Abstract The microstructure, chemical composition and mechanical strength of heterogeneous materials of mantis shrimp (Oratosquilla oratoria) saddle were studied. As the key component of the striking system, the saddle comprised two distinct layers including outer layer and inner layer. The outer layer contained blocky microtubules and exhibited compact appearance. The inner layer presented a typical periodic lamellar structure. Due to the change of the thickness of the mineralized outer layer, the organic multilamellar structure became the foundation and enhanced the connection strength (4.55 MPa) at the connect regions between the saddle and merus exoskeleton and membrane, respectively. In the process of fracture, the lamellar structure dispersed the stress effectively by the change of the crack deflection direction and the microfibrils ordered arrangement. The exploration of mantis shrimp saddle region is beneficial to understand the striking system and provided the possibility for the stable connection of heterogeneous materials in engineering fields. The microstructure, heterogeneous material connection characteristics and high mechanical strength of saddle provide bionic models for the preparation of fiber-reinforced resin composites and soft composites.

Alloy Digest ◽  
2009 ◽  
Vol 58 (8) ◽  

Abstract DMV 59 is the material of choice for a wide variety of applications where significant corrosion resistance and high mechanical strength is necessary. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-672. Producer or source: Mannesmann DMV Stainless USA Inc.


Alloy Digest ◽  
1965 ◽  
Vol 14 (5) ◽  

Abstract BOFORS 2RM2 is a hardenable stainless cast steel having good weldability, high mechanical strength and improved corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: SS-169. Producer or source: Aktiebolaget Bofors.


Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3574
Author(s):  
Pejman Heidarian ◽  
Hossein Yousefi ◽  
Akif Kaynak ◽  
Mariana Paulino ◽  
Saleh Gharaie ◽  
...  

Electroconductive hydrogels with stimuli-free self-healing and self-recovery (SELF) properties and high mechanical strength for wearable strain sensors is an area of intensive research activity at the moment. Most electroconductive hydrogels, however, consist of static bonds for mechanical strength and dynamic bonds for SELF performance, presenting a challenge to improve both properties into one single hydrogel. An alternative strategy to successfully incorporate both properties into one system is via the use of stiff or rigid, yet dynamic nano-materials. In this work, a nano-hybrid modifier derived from nano-chitin coated with ferric ions and tannic acid (TA/Fe@ChNFs) is blended into a starch/polyvinyl alcohol/polyacrylic acid (St/PVA/PAA) hydrogel. It is hypothesized that the TA/Fe@ChNFs nanohybrid imparts both mechanical strength and stimuli-free SELF properties to the hydrogel via dynamic catecholato-metal coordination bonds. Additionally, the catechol groups of TA provide mussel-inspired adhesion properties to the hydrogel. Due to its electroconductivity, toughness, stimuli-free SELF properties, and self-adhesiveness, a prototype soft wearable strain sensor is created using this hydrogel and subsequently tested.


2021 ◽  
Vol 7 (1) ◽  
pp. eabc5442
Author(s):  
Dianyu Dong ◽  
Caroline Tsao ◽  
Hsiang-Chieh Hung ◽  
Fanglian Yao ◽  
Chenjue Tang ◽  
...  

The high mechanical strength and long-term resistance to the fibrous capsule formation are two major challenges for implantable materials. Unfortunately, these two distinct properties do not come together and instead compromise each other. Here, we report a unique class of materials by integrating two weak zwitterionic hydrogels into an elastomer-like high-strength pure zwitterionic hydrogel via a “swelling” and “locking” mechanism. These zwitterionic-elastomeric-networked (ZEN) hydrogels are further shown to efficaciously resist the fibrous capsule formation upon implantation in mice for up to 1 year. Such materials with both high mechanical properties and long-term fibrous capsule resistance have never been achieved before. This work not only demonstrates a class of durable and fibrous capsule–resistant materials but also provides design principles for zwitterionic elastomeric hydrogels.


Nanoscale ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 3079-3091
Author(s):  
Libo Chang ◽  
Zhiyuan Peng ◽  
Tong Zhang ◽  
Chuying Yu ◽  
Wenbin Zhong

Wood-inspired HCNF@Lig introduced into MXenes constructing a nacre-like material with high mechanical strength and excellent flexibility used as a flexible supercapacitor.


Soft Matter ◽  
2020 ◽  
Vol 16 (14) ◽  
pp. 3416-3424
Author(s):  
Xiongzhi Zhang ◽  
Yuanxun Liu ◽  
Junwei Wen ◽  
Zhiyong Zhao ◽  
Hongxiang Chen ◽  
...  

The introduction of structured microsphere composites into hydrogels is found to improve their mechanical strength capability.


2015 ◽  
Vol 458 ◽  
pp. 45-52 ◽  
Author(s):  
Feifei Sun ◽  
Meiqin Lin ◽  
Zhaoxia Dong ◽  
Juan Zhang ◽  
Cheng Wang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document