Case descriptions for use when training users of the IDEAL schedule

Author(s):  
Maya Semrau ◽  
Alistair Burns ◽  
Antonio Lobo ◽  
Marcel Olde Rikkert ◽  
Philippe Robert ◽  
...  

This chapter provides four case histories that can be used in the training of future users of the International Schedule for the Integrated Assessment and Staging of Care for Dementia (IDEAL schedule) and its accompanying ‘Menu of care options’. The case histories describe patients with different types and severity levels of dementia and have been written in a manner that makes them understandable in different settings or countries, as well as having been shown to be useful in the training of users of the schedule in different countries. Ratings for the case histories are provided according to the seven dimensions of the IDEAL schedule, with the consequent links to the ‘Menu of care options’. The chapter also includes suggestions about the development of local case histories typical for the setting in which the schedule will be used when training users in that setting.

Author(s):  
Maya Semrau ◽  
Alistair Burns ◽  
Antonio Lobo ◽  
Marcel Olde Rikkert ◽  
Philippe Robert ◽  
...  

Assessment and Staging of Care for Dementia: The IDEAL schedule and its user manual gives a detailed overview of the International Schedule for the Integrated Assessment and Staging of Care for Dementia (IDEAL schedule) and provides all information that is needed when learning how to use the schedule and when using it. This includes details on the aims of the schedule; a description of how the schedule was developed and tested; instructions on how to use the schedule; the IDEAL schedule itself; the glossary of terms used in the schedule; and suggestions about the interventions that are recommended for consideration at different stages of severity of dementia. The book also includes four case histories, which are recommended for use when training in the use of the schedule.


Author(s):  
Maya Semrau ◽  
Alistair Burns ◽  
Antonio Lobo ◽  
Marcel Olde Rikkert ◽  
Philippe Robert ◽  
...  

This chapter includes a complete copy of the IDEAL schedule, including its seven dimensions: 1) activities of daily living; 2) physical health; 3) cognitive functioning; 4) behavioural and psychological symptoms; 5) social support; 6) informal care, (which includes two sub-dimensions: time spent on care by informal carer and carer stress); and 7) formal professional care (which includes three sub-dimensions: total number of hours of formal professional care received, total number of hours of formal professional care needed, and additional dementia-related care needed). Each dimension has a set of anchor points, which assist the user of the schedule in rating the different dimensions appropriately. Information is also provided on how to calculate the total sum score on the IDEAL schedule.


Author(s):  
M. A. Rahman ◽  
T. Heidrick ◽  
B. Fleck ◽  
M. Koksal

The objective of perforating is to maximize well productivity by establishing good connectivity between the wellbore and formation. The conventional method of perforation — perforation by shooting (PS) — cannot achieve expected wellbore productivity due to a region of reduced permeability around the perforation tunnel. In this study, it has been established that permeability is decreased in the range of 30%–75% due to the implementation of the PS technique compared to the openhole completion. As a result, a new perforation technique — perforation by drilling (PD) — has been proposed in this paper. To simulate a perforated completion, cylindrical sand samples (0.0572 in OD) consolidated with cement with varying porosity were prepared. These samples were perforated (0.0136 m ED) by the PS, PD and Casting techniques. Perforations created by the Casting techniques are considered the ideal, openhole perforation tunnel. Fluid flow rates and differential pressure across the perforated samples were measured for three different types of samples using “Geotechnical Digital System” triaxial testing set-up. Fluid flow rates with changing differential pressure and finally pressure build-up data with time indicates the PD technique can achieve better wellbore productivity compared to the PS technique. Results indicate that at 100 kPa differential pressure the PS, PD and Casting techniques can achieve 0.20 mL/s, 0.65 mL/s and 1.00 mL/s fluid flow rates respectively across a sample.


2020 ◽  
pp. 0160449X2093332
Author(s):  
Britta Girtz

Existing research on work hour mismatches has examined gender and occupational differences, but it has largely assumed that these factors work independently of each other. This paper combines insights from the stress of higher status hypothesis and the concept of the ideal worker to examine the intersections of gender and occupation in relation to inequalities in workers’ abilities to control the amount of time they spend in paid work. I also offer a longitudinal and process-oriented analysis by examining how men and women in upper, middle, and lower prestige occupations differ in their chances of having hour mismatches, resolving mismatches, and in the methods through which they resolve them. Findings indicate that men and women experience different types of mismatches and men in upper level occupations are at greater risk of mismatches and least likely to find resolutions, yet outcomes are heavily influenced by the intersections of gender and occupation, illustrating the need for this type of analysis. There are few results to indicate differences in the mechanism of mismatch resolution by either gender or occupation.


1965 ◽  
Vol 12 (1) ◽  
pp. 24-28
Author(s):  
R.L.H. Damerham

This paper will deal with the following topics: 1. A new approach to corrosion technology whereby the use of non‐corrodible materials is studied as against the present practice of largely considering the protection of traditional materials which are subject to corrosion. 2. Types of corrosion for which the use of plastics materials are suitable. 3. The division of plastics into categories differentiated by their resistance to different types of corrosion. 4. The physical properties of importance in considering the use of plastics. 5. The education of (a) The user in the special characteristics of plastics which differ from traditional materials, and (b) Of the supplier to study the needs of the user and to make available to him all the technical information he will require. 6. Case histories in which the use of plastics has been successful where normal anti‐corrosion protection of traditional materials would not have been suitable. 7. Details of services which are available to users and which have been used on installations quoted above, in particular, installation services and prefabricated services. 8. Standards, British, American and International, which are now printed and others which are being worked out to give guidance both to user and manufacturer.


Author(s):  
Zhang Limei ◽  
Du Shoujun ◽  
Fan Meng

Because of different types of load, material properties deviation and construction errors, structures have initial defects inevitably. Therefore structural damages emerge easily and have strong randomness. At the same time, the ideal design model often has difference with structure in service. To most structures, the initial testing dates cannot be obtained, while this initial model is very important to structural damage detection. So the ideal model needs to revise. In this paper, elastic modulus, Poisson ratio and link section area are given as initial random defects and these defects obey normal distribution which can be constructed by Monte Carlo probabilistic design method. Firstly, the sensitivity parameters to structural response will be received by PDS technology from Ansys. Next, the square pyramid space grid models with random defects were obtained. Finally, given link element damage, using the method combined curvature mode difference with wavelet transform, the link element damage can be determined. Through analysis, the effects about the initial defects to damage detection will be obtained.


Author(s):  
Axel Beskow ◽  
Pedro Martinez Duartez ◽  
Estuardo Beheren ◽  
Felipe Fiolo ◽  
Cardoso Ramos Almino

Abstract Background: The SARS-CoV2 virus pandemic pandemic has been characterized for its rapid global dispersion. Obesity is an independent risk factor for the most severe cases of COVID -19. The impact in Argentina differs from others since it was able to anticipate public health interventions in order to flatten the contagion curve. Early quarantine achieved better control of the pandemic and, following the recommendations of scientific societies in countries with higher affectation, elective bariatric surgeries (BS) and in-person consults were suspended. Objective: Bariatric surgeons were surveyed to assess the impact of the pandemic and the measures undertaken on the practice of BS in Argentina.Method: Between April 17 and 21, 2020, an online survey in Google forms was disseminated to bariatric surgeons residing in Argentina. It consists of 40 specific and non-specific questions regarding BS practice and COVID pandemic. Consent to participate was obtained from surgeons by completing the survey.Results: 83 surgeons averaging 47.17 years of age responded the survey. Together they performed 10515 BS in 2019. More than 65% stated that more than 50% of their income derives from this activity, and more than 40% depend on more than 75% of it. The average hospital stay was 1.6 days and 85% reported using Intensive Care Unit (ICU) in less than 1% of their patients. According to the scores of hospital affectation issued by the Society of American Gastrointestinal and Endoscopic Surgeons (SAGES), 54% reported being in Phase I and 34% had not yet been affected by the pandemic. All, except one, suspended the elective BS 7.7 days on average before the appearance of the first local case. 95.7% offer virtual consults, but 48% obtain no retribution for them. 26% would consider performing BS without a previous endoscopic evaluation.90% of the surgeons surveyed (75) continue performing other types of surgeries via laparoscopy. In case of operating a patient without suspected SARS-CoV-2 virus infection, 80% would use N95 masks and 56.6% would use face protection shields; two thirds would use smoke filters for the pneumoperitoneum and only 10.8% would continue with the usual protection measures. To restart the elective activity, 56.6% proposed that the hospital should be in phase 0 or I, that the patient should meet certain characteristics for their selection and that the scientific society must recommend the way to restart of the activity.Patient selection criteria with greater consensus were testing to rule out asymptomatic COVID-positive patients, epidemiology, absence of chronic lung disease, age under 60, and immunological integrity. 19.2% regard sleeve gastrectomy as the ideal BS during the pandemic, and 88% of the surgeons would not change their chosen BS technique based on infection risk. Conclusion: Elective BS is currently suspended in Argentina, although epidemiologically the conditions in the country are not unfavorable. Economic impact for those involved is significant. Short-term vision is pessimistic, but recommendations originating from the scientific societies that nucleate them are expected in order to guide health authorities towards appropriate regulations suitable for the local practice.


2018 ◽  
Author(s):  
Khairia El-Said El-Nadi Khairia

AbstractDifferent models of tumor growth are considered. Some mathematical methods are developed to analyze the dynamics of mutations enabling cells in cancer patients to metas-tize. The mathematical models consist of some stochastic dynamical systems describing tumor cells and immune effectors. It is also considered a method to find the ideal outcome of some treatments. Some different types of dendritic cells are considered. The obtained results will help to find some suitable treatments,which can be successful in returning an aggressive tumor to its passive,non-immune evading state. The principle goal of this paper is to find ways to treat the cancer tumors before they can reach an advanced stage devel-opmen.AMS Subject Classifications92B05, 37C45.


Author(s):  
Michal Krump ◽  
Zelmira Krumpova

AbstractAll-ceramic systems represent an excellent restorative alternative for fixed dental prostheses, single crowns, and veneers in the anterior dentition. With respect to improved mechanical properties, lithium disilicate ceramic material provide a broad range of indications, and extended veneers can serve as an alternative to full crowns. Although ceramic veneers represent a more conservative approach compared to crowns, the correct indication is essential to achieving the ideal outcome. The following case reports describe two types of fixed restorations of the anterior dentition: extended lithium disilicate ceramic veneers and lithium disilicate full crowns. Factors influencing treatment selection for each type of restorations are presented.


Sign in / Sign up

Export Citation Format

Share Document