scholarly journals Erratum: The GALAH survey: Chemical homogeneity of the Orion complex

2021 ◽  
Vol 508 (4) ◽  
pp. 4969-4969
Author(s):  
Janez Kos ◽  
Joss Bland-Hawthorn ◽  
Sven Buder ◽  
Thomas Nordlander ◽  
Lorenzo Spina ◽  
...  
Keyword(s):  
2004 ◽  
Vol 83 (10) ◽  
pp. 2610-2612
Author(s):  
Sven Gijp ◽  
Johan E. Elshof ◽  
Oliver Steigelmann ◽  
Henk Verweij

1954 ◽  
Vol 32 (11) ◽  
pp. 999-1004 ◽  
Author(s):  
C. T. Bishop ◽  
G. A. Adams ◽  
E. O. Hughes

A complex polysaccharide has been isolated from the fresh-water alga, Anabaena cylindrica, grown in a synthetic culture medium. Prolonged acid hydrolysis yielded glucose, xylose, glucuronic acid, galactose, rhamnose, and arabinose in a molar ratio of 5: 4: 4: 1: 1: 1. Chemical fractionations of the polysaccharide material from solution in cupriethylenediamine, and of its acetate from organic solvents indicated chemical homogeneity.


Nanomaterials ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 18
Author(s):  
Tahar Azib ◽  
Claire Thaury ◽  
Fermin Cuevas ◽  
Eric Leroy ◽  
Christian Jordy ◽  
...  

Embedding silicon nanoparticles in an intermetallic matrix is a promising strategy to produce remarkable bulk anode materials for lithium-ion (Li-ion) batteries with low potential, high electrochemical capacity and good cycling stability. These composite materials can be synthetized at a large scale using mechanical milling. However, for Si-Ni3Sn4 composites, milling also induces a chemical reaction between the two components leading to the formation of free Sn and NiSi2, which is detrimental to the performance of the electrode. To prevent this reaction, a modification of the surface chemistry of the silicon has been undertaken. Si nanoparticles coated with a surface layer of either carbon or oxide were used instead of pure silicon. The influence of the coating on the composition, (micro)structure and electrochemical properties of Si-Ni3Sn4 composites is studied and compared with that of pure Si. Si coating strongly reduces the reaction between Si and Ni3Sn4 during milling. Moreover, contrary to pure silicon, Si-coated composites have a plate-like morphology in which the surface-modified silicon particles are surrounded by a nanostructured, Ni3Sn4-based matrix leading to smooth potential profiles during electrochemical cycling. The chemical homogeneity of the matrix is more uniform for carbon-coated than for oxygen-coated silicon. As a consequence, different electrochemical behaviors are obtained depending on the surface chemistry, with better lithiation properties for the carbon-covered silicon able to deliver over 500 mAh/g for at least 400 cycles.


NANO ◽  
2018 ◽  
Vol 13 (09) ◽  
pp. 1850100 ◽  
Author(s):  
Rui-Feng Zhao ◽  
Bo Ren ◽  
Guo-Peng Zhang ◽  
Zhong-Xia Liu ◽  
Jian-Jian Zhang

The CrCuFeMnNi high entropy alloy (HEA) powder was synthesized by mechanical alloying. The effects of milling time and subsequent annealing on the structure evolution, thermostability and magnetic property were investigated. After 50[Formula: see text]h of milling, the CrCuFeMnNi HEA powder consisted of a major FCC phase and a small amount of BCC phase. The crystallite size and strain lattice of 50[Formula: see text]h-ball-milled CrCuFeMnNi HEA powder were 12[Formula: see text]nm and 1.02%, respectively. The powder exhibited refined morphology and excellent chemical homogeneity. The supersaturated solid solution structure of the as-milled HEA powder transformed into FCC1, FCC2, a small amount of BCC and [Formula: see text] phase in annealed state. Most of the BCC phase decomposed into FCC (mainly FCC2 phase) and [Formula: see text] phases, and the dynamic phase transition was almost in equilibrium at 900[Formula: see text]C. The saturated magnetization and coercivity force of the 50[Formula: see text]h-ball-milled CrCuFeMnNi HEA powder were respectively 16.1[Formula: see text]emu/g and 56.2[Formula: see text]Oe.


2011 ◽  
Vol 48 ◽  
pp. 109-114 ◽  
Author(s):  
B.L. James ◽  
Y.G. Tsamis ◽  
M.J. Barlow ◽  
M.S. Westmoquette ◽  
J. Walsh ◽  
...  

2010 ◽  
Vol 43 (1-2) ◽  
pp. 551-554 ◽  
Author(s):  
Veronica Pinnick ◽  
Stanislav V. Verkhoturov ◽  
Leonid Kaledin ◽  
Emile A. Schweikert

Author(s):  
Elena V. Tomina ◽  
Dmitry A. Lastochkin ◽  
Sergey A. Maltsev

Due to rare earth doping, phosphates and vanadates are the leading materials for the synthesis of phosphors due to their thermal stability, low sintering temperature, and chemical stability. Phosphors in the nanoscale state are of particular interest. The simple, fast, and scalable synthesis of nanophosphors with high chemical homogeneity is a priority task. The purpose of this work was to synthesize powders of mixed yttrium vanadate-phosphate crystals of various compositions by coprecipitation under the action of microwave radiation and spray pyrolysis, as well as to compare the characteristics ofthe obtained samples. Samples of YVхP1–хO4 of different compositions were synthesized by coprecipitation under the action of microwave radiation and spray pyrolysis in different modes. In the case of the synthesis of yttrium vanadate-phosphate YVхP1–хO4 by spray pyrolysis followed by annealing, according to the X-ray phase analysis data, single-phase nanopowders were formed. The morphological characteristics of the samples were revealed by the methods of transmission electron microscopy and scanning electron microscopy. Depending on the annealing conditions, the samples were either faceted or spherical particlesless than 100 nm in size. The composition of the YVхP1–хO4 , samples synthesized by the coprecipitation method under the action of microwave radiation strongly depended on the pH of the precursor solution. The minimum content of impurity phases was reached at pH 9.Spray pyrolysis allows the synthesis of yttrium vanadate phosphate YVхP1–хO4 nanopowders of high chemical homogeneity with a particle size of less than 100 nm. The maximum chemical homogeneity of yttrium vanadate-phosphate powders was achieved at pH = 9 during the synthesis of YVхP1–хO4 by coprecipitation under the action of microwave radiation. However, the particle size dispersion was large, within the range of 2–60 μm.       References 1. Wu C., Wang Y., Jie W. Hydrothermal synthesisand luminescent properties of LnPO4:Tb (Ln = La, Gd)phosphors under VUV excitation. Journal of Alloys andCompounds. 2007;436: 383–386. DOI: https://doi.org/10.1016/j.jallcom.2006.07.0562. Huang J., Tang L., Chen N., Du G. Broadeningthe photoluminescence excitation spectral bandwidthof YVO4:Eu3+ nanoparticles via a novel core-shell andhybridization approach. Materials. 2019;12: 3830. DOI:https://doi.org/10.3390/ma122338303. Wu Y., Zhang Z., Suo H., Zhao X., Guo C. 808 nmlight triggered up-conversion optical nano-thermometerYPO4:Nd3+/Yb3+/Er3+ based on FIR technology.Journal of Luminescence. 2019;214: 116478. DOI:https://doi.org/10.1016/j.jlumin.2019.1165784. Xiu Z., Wu Y., Hao X., Li X., Zhang L. Uniformand well-dispersed Y2O3:Eu/YVO4:Eu composite microsphereswith high photoluminescence prepared bychemical corrosion approach. Colloids Surf. A.2012;401(5): 68–73. DOI: https://doi.org/10.1016/j.colsurfa.2012.03.0215. Vats B. G., Gupta S. K., Keskar M., Phatak R.,Mukherjee S., Kannan S. The effect of vanadium substitutionon photoluminescent properties of KSrLa(-PO4)x(VO4)2x:Eu3+ phosphors, a new variant of phosphovanadates.New Journal of Chemistry. 2016;40(2):1799–1806. DOI: https://doi.org/10.1039/c5nj02951a6. Riwotzki K., Haase M. Colloidal YVO4:Eu andYP0.95V0.05O4:Eu nanoparticles: luminescence and energytransfer processes. The Journal of Physical ChemistryB. 2001;105(51): 12709–12713. DOI: https://doi.org/10.1021/jp01137357. Wu C.-C., Chen K.-B., Lee C.-S., Chen T.-M.,Cheng B.-M. Synthesis and VUV photoluminescencecharacterization of (Y,Gd)(V,P)O4:Eu3+ as a potentialred-emitting PDP phosphor. Chem. Mater. 2007;19(13):3278–3285. DOI: https://doi.org/10.1021/cm061042a8. Shimomura Y., Kurushima T., Olivia R., Kijima N.Synthesis of Y(P,V)O4:Eu3+ red phosphor by spray pyrolysiswithout postheating. The Japan Society of Applied.2005;44(3): 1356–1360. DOI: https://doi.org/10.1143/JJAP.44.13569. Lai H, Chen B., Xu W., Xie Y., Wang X., Di W. Fineparticles (Y,Gd)PxV1−xO4:Eu3+ phosphor for PDP preparedby coprecipitation reaction. Materials Letters.2006; 60 (11): 1341-1343. DOI: https://doi.org/10.1016/j.matlet.2005.11.05110. Singh V., Takami S., Aoki N., Hojo D., Arita T.,Adschiri T. Hydrothermal synthesis of luminescentGdVO4:Eu nanoparticles with dispersibility in organicsolvents. Journal of Nanoparticle Research. 2014;16(5):2378. DOI: https://doi.org/10.1007/s11051-014-2378-211. Song W.-S., Kim Y.-S., Yang H. Hydrothermalsynthesis of self-emitting Y(V,P)O4 nanophosphors forfabrication of transparent blue-emitting display device.Journal of Luminescence. 2012;132(5): 1278–1284.DOI: https://doi.org/10.1016/j.jlumin.2012.01.01512. Yu M., Lin J., Fu J., Han Y. Sol–gel fabrication,patterning and photoluminescent properties ofLaPO4:Ce3+, Tb3+ nanocrystalline thin films. ChemicalPhysics Letters. 2003;5(1-2): 178–183. DOI: https://doi.org/10.1016/S0009-2614(03)00239-213. Raoufi D., Raoufi T. The effect of heat treatmenton the physical properties of sol–gel derived ZnO thinfilms. Applied Surface Science. 2009;255(11): 5812–5817. DOI: https://doi.org/10.1016/j.ap-susc.2009.01.01014. Shao J., Yan J., Li X., Li S., Hu T. Novel fluorescentlabel based on YVO4:Bi3+, Eu3+ for latent fingerprintdetection. Dyes and Pigments. 2019;160: 555–562.DOI: https://doi.org/10.1016/j.dyepig.2018.08.03315. Dolinskaya Yu. A., Kolesnikov I. E., KurochkinA. V., Man’shina A. A., Mikhailov M. D., SemenchaA. V. Sol-Gel synthesis and luminescent propertiesof YVO4: Eu nanoparticles. Glass Physics and Chemistry.2013;39(3): 308–310. DOI: https://doi.org/10.1134/s108765961303006116. Tomina E. V., Sladkopevtsev B. V., Knurova M. V.,Latyshev A.N., Mittova I. Y., Mittova V. O. Microwavesynthesis and luminescence properties of YVO4:Eu3+.Inorganic Materials. 2016;52(5): 495–498. DOI: https://doi.org/10.7868/S0002337X1605017117. Tomina E. V., Mittova I. J., Burtseva N. A.,Sladkopevtsev B. V. Method for synthesis of yttrium orthovanadate-based phosphor: patent for invention No2548089. The patent holder FGBOU VPO “Voronezhstate University” No 2013133382/05; declared12.11.2013; published. 20.05.2015.18. Tomina E. V., Kurkin N. A., & Mal’tsev S. A.Microwave synthesis of yttrium orthoferrite dopedwith nickel. Kondensirovannye sredy i mezhfaznyegranitsy = Condensed Matter and Interphases.2019;21(2): 306–312. DOI:https://doi.org/10.17308/kcmf.2019.21/768 (In Russ., abstract in Eng.)19. Huang J., Gao R., Lu Z., Qian D., Li W., Huang B.,He X. Sol–gel preparation and photoluminescenceenhancement of Li+ and Eu3+ co-doped YPO4 nanophosphors.Optical Materials. 2010;32(9): 857–861.DOI: https://doi.org/10.1016/j.optmat.2009.12.01120. Brandon D., Kaplan W. D. MicrostructuralCharacterization of Materials. John Wiley & Sons Ltd;1999. 409 p. DOI: https://doi.org/10.1002/9780470727133


2018 ◽  
Vol 6 (13) ◽  
pp. 5378-5397 ◽  
Author(s):  
Ilkan Calisir ◽  
Abdulkarim. A. Amirov ◽  
Annette K. Kleppe ◽  
David A. Hall

The structure and key functional properties of a promising lead-free solid solution, BiFeO3–BaTiO3, have been optimised by controlling chemical homogeneity via La-substitution strategies and thermal treatment.


Sign in / Sign up

Export Citation Format

Share Document