scholarly journals A biphasic approach for characterizing tensile, compressive and hydraulic properties of the sclera

2021 ◽  
Vol 18 (174) ◽  
pp. 20200634
Author(s):  
Dillon M. Brown ◽  
Machelle T. Pardue ◽  
C. Ross Ethier
Keyword(s):  
Association Studies ◽  
Compressive Strain ◽  
Tensile Modulus ◽  
Material Model ◽  
Biomechanical Properties ◽  
Compression Testing ◽  
Unconfined Compression ◽  
Tensile Stiffness ◽  
Analyse Data ◽  
Poroelastic Theory

Measuring the biomechanical properties of the mouse sclera is of great interest: altered scleral properties are features of many common ocular pathologies, and the mouse is a powerful tool for studying genetic factors in disease, yet the small size of the mouse eye and its thin sclera make experimental measurements in the mouse difficult. Here, a poroelastic material model is used to analyse data from unconfined compression testing of both pig and mouse sclera, and the tensile modulus, compressive modulus and permeability of the sclera are obtained at three levels of compressive strain. Values for all three properties were comparable to previously reported values measured by tests specific for each property. The repeatability of the approach was evaluated using a test–retest experimental paradigm on pig sclera, and tensile stiffness and permeability measurements were found to be reasonably repeatable. The intrinsic material properties of the mouse sclera were measured for the first time. Tensile stiffness and permeability of the sclera in both species were seen to be dependent on the state of compressive strain. We conclude that unconfined compression testing of sclera, when analysed with poroelastic theory, is a powerful tool to phenotype mouse scleral changes in future genotype–phenotype association studies.

scholarly journals A Biphasic Approach for Characterizing Tensile, Compressive, and Hydraulic Properties of the Sclera

2020 ◽  
Author(s):  
Dillon M. Brown ◽  
Machelle T. Pardue ◽  
C. Ross Ethier
Keyword(s):  
Association Studies ◽  
Compressive Strain ◽  
Tensile Modulus ◽  
Tensile Tests ◽  
Biomechanical Properties ◽  
Compression Testing ◽  
Compression Tests ◽  
Unconfined Compression ◽  
Tensile Stiffness ◽  
Poroelastic Theory

AbstractMeasuring the biomechanical properties of the mouse sclera is of great interest, since altered scleral properties are features of many common ocular pathologies, and the mouse is a powerful species for studying genetic factors in disease. Here, a poroelastic material model is used to analyze data from unconfined compression testing of both pig and mouse sclera, and the tensile modulus, compressive modulus, and permeability of the sclera are obtained at three levels of compressive strain. Values for all three properties measured simultaneously by unconfined compression of pig sclera were comparable to previously reported values measured by tests specific for each property, i.e., compression tests, biaxial tensile tests, and falling-head permeability assays. The repeatability of the approach was evaluated using test-retest experimental paradigm on pig sclera. Repeatability was low for measured compressive stiffness, indicating permanent changes to the samples occurring after the first test. However, reasonable repeatability for tensile stiffness and permeability was observed. The intrinsic material properties of the mouse sclera were measured for the first time. Tensile stiffness and permeability of the sclera in both species were seen to be dependent on the state of compressive strain. We conclude that unconfined compression testing of sclera, when analyzed with poroelastic theory, can be used as a powerful tool to phenotype mouse scleral changes in future genotype-phenotype association studies.Statement of SignificanceOcular biomechanics is strongly influenced by the sclera, the outermost white coat of the eye. Many ocular diseases are believed to be influenced by pathological changes to scleral microstructure and biomechanics, making intrinsic biomechanical properties an important outcome measure in many studies. However, the small mouse eye precludes the use of most traditional biomechanical characterization techniques. Here, we show that unconfined compression testing analyzed with poroelastic theory can produce measurements of biomechanical properties in the pig sclera comparable to those measured by other traditional techniques. Importantly, this technique can be successfully applied to the mouse sclera, enabling more widespread use of the species as a model for ocular disease.

Mechanical properties of low-density paper

2020 ◽  
Vol 35 (1) ◽  
pp. 61-70
Author(s):  
Na Young Park ◽  
Young Chan Ko ◽  
Lili Melani ◽  
Hyoung Jin Kim
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Structural Change ◽  
Tensile Testing ◽  
Tensile Modulus ◽  
Gauge Length ◽  
Efficiency Factor ◽  
Low Density ◽  
Tensile Stiffness ◽  
Lower Tensile Strength

AbstractFor the mechanical properties of paper, tensile testing has been widely used. Among the tensile properties, the tensile stiffness has been used to determine the softness of low-density paper. The lower tensile stiffness, the greater softness of paper. Because the elastic region may not be clearly defined in a load-elongation curve, it is suggested to use the tensile modulus which is defined as the slope between the two points in the curve. The two points which provide the best correlation with subjective softness evaluation should be selected. Low-density paper has a much lower tensile strength, but much larger elongation at the break. It undergoes a continuous structural change during mechanical testing. The degree of the structural change should depend on tensile conditions such as the sample size, the gauge length, and the rate of elongation. For low-density paper, the tensile modulus and the tensile strength should be independent of each other. The structure efficiency factor (SEF) is defined as a ratio of the tensile strength to the tensile modulus and it may be used a guideline in developing superior low-density paper products.

scholarly journals Anisotropic and age-dependent elastic material behavior of the human costal cartilage

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Matthias Weber ◽  
Markus Alexander Rothschild ◽  
Anja Niehoff
Keyword(s):  
Costal Cartilage ◽  
Indentation Test ◽  
Biomechanical Properties ◽  
Material Behavior ◽  
Cartilage Tissue ◽  
Elastic Behavior ◽  
Unconfined Compression ◽  
Unconfined Compression Test ◽  
Young’S Moduli ◽  
Age Related

AbstractCompared to articular cartilage, the biomechanical properties of costal cartilage have not yet been extensively explored. The research presented addresses this problem by studying for the first time the anisotropic elastic behavior of human costal cartilage. Samples were taken from 12 male and female cadavers and unconfined compression and indentation tests were performed in mediolateral and dorsoventral direction to determine Young’s Moduli EC for compression and Ei5%, Ei10% and Eimax at 5%, 10% and maximum strain for indentation. Furthermore, the crack direction of the unconfined compression samples was determined and histological samples of the cartilage tissue were examined with the picrosirius-polarization staining method. The tests revealed mean Young’s Moduli of EC = 32.9 ± 17.9 MPa (N = 10), Ei5% = 11.1 ± 5.6 MPa (N = 12), Ei10% = 13.3 ± 6.3 MPa (N = 12) and Eimax = 14.6 ± 6.6 MPa (N = 12). We found that the Young’s Moduli in the indentation test are clearly anisotropic with significant higher results in the mediolateral direction (all P = 0.002). In addition, a dependence of the crack direction of the compressed specimens on the load orientation was observed. Those findings were supported by the orientation of the structure of the collagen fibers determined in the histological examination. Also, a significant age-related elastic behavior of human costal cartilage could be shown with the unconfined compression test (P = 0.009) and the indentation test (P = 0.004), but no sex effect could be detected. Those results are helpful in the field of autologous grafts for rhinoplastic surgery and for the refinement of material parameters in Finite Element models e.g., for accident analyses with traumatic impact on the thorax.

scholarly journals Variation of Passive Biomechanical Properties of the Small Intestine along Its Length: Microstructure-Based Characterization

2021 ◽  
Vol 8 (3) ◽  
pp. 32
Author(s):  
Dimitrios P. Sokolis
Keyword(s):  
Small Intestine ◽  
Orientation Angle ◽  
Axial Direction ◽  
Material Model ◽  
Biomechanical Properties ◽  
Intestinal Wall ◽  
Model Parameters ◽  
Material Models ◽  
Hyper Elastic ◽  
Rat Tissue

Multiaxial testing of the small intestinal wall is critical for understanding its biomechanical properties and defining material models, but limited data and material models are available. The aim of the present study was to develop a microstructure-based material model for the small intestine and test whether there was a significant variation in the passive biomechanical properties along the length of the organ. Rat tissue was cut into eight segments that underwent inflation/extension testing, and their nonlinearly hyper-elastic and anisotropic response was characterized by a fiber-reinforced model. Extensive parametric analysis showed a non-significant contribution to the model of the isotropic matrix and circumferential-fiber family, leading also to severe over-parameterization. Such issues were not apparent with the reduced neo-Hookean and (axial and diagonal)-fiber family model, that provided equally accurate fitting results. Absence from the model of either the axial or diagonal-fiber families led to ill representations of the force- and pressure-diameter data, respectively. The primary direction of anisotropy, designated by the estimated orientation angle of diagonal-fiber families, was about 35° to the axial direction, corroborating prior microscopic observations of submucosal collagen-fiber orientation. The estimated model parameters varied across and within the duodenum, jejunum, and ileum, corroborating histologically assessed segmental differences in layer thicknesses.

scholarly journals Ewastools: Infinium Human Methylation BeadChip pipeline for population epigenetics integrated into Galaxy

GigaScience ◽  
2020 ◽  
Vol 9 (5) ◽  
Author(s):  
Katarzyna Murat ◽  
Björn Grüning ◽  
Paulina Wiktoria Poterlowicz ◽  
Gillian Westgate ◽  
Desmond J Tobin ◽  
...  
Keyword(s):  
Dna Methylation ◽  
Association Studies ◽  
Methylation Analysis ◽  
Web Based ◽  
Array Platform ◽  
Complex Evaluation ◽  
The Galaxy ◽  
Population Epigenetics ◽  
Analyse Data ◽  
Dna Methylation Analysis

Abstract Background Infinium Human Methylation BeadChip is an array platform for complex evaluation of DNA methylation at an individual CpG locus in the human genome based on Illumina’s bead technology and is one of the most common techniques used in epigenome-wide association studies. Finding associations between epigenetic variation and phenotype is a significant challenge in biomedical research. The newest version, HumanMethylationEPIC, quantifies the DNA methylation level of 850,000 CpG sites, while the previous versions, HumanMethylation450 and HumanMethylation27, measured >450,000 and 27,000 loci, respectively. Although a number of bioinformatics tools have been developed to analyse this assay, they require some programming skills and experience in order to be usable. Results We have developed a pipeline for the Galaxy platform for those without experience aimed at DNA methylation analysis using the Infinium Human Methylation BeadChip. Our tool is integrated into Galaxy (http://galaxyproject.org), a web-based platform. This allows users to analyse data from the Infinium Human Methylation BeadChip in the easiest possible way. Conclusions The pipeline provides a group of integrated analytical methods wrapped into an easy-to-use interface. Our tool is available from the Galaxy ToolShed, GitHub repository, and also as a Docker image. The aim of this project is to make Infinium Human Methylation BeadChip analysis more flexible and accessible to everyone.

Anisotropic and Inhomogeneous Tensile Behavior of the Human Anulus Fibrosus: Experimental Measurement and Material Model Predictions

2000 ◽  
Vol 123 (3) ◽  
pp. 256-263 ◽  
Author(s):  
Dawn M. Elliott ◽  
Lori A. Setton
Keyword(s):  
Tensile Modulus ◽  
Material Model ◽  
Material Behavior ◽  
Anulus Fibrosus ◽  
Linear Region ◽  
Material Behaviors ◽  
Model Predictions ◽  
Complete Set ◽  
Poisson's Ratios ◽  
Poisson’S Ratios

The anulus fibrosus (AF) of the intervertebral disc exhibits spatial variations in structure and composition that give rise to both anisotropy and inhomogeneity in its material behaviors in tension. In this study, the tensile moduli and Poisson’s ratios were measured in samples of human AF along circumferential, axial, and radial directions at inner and outer sites. There was evidence of significant inhomogeneity in the linear-region circumferential tensile modulus (17.4±14.3 MPa versus 5.6±4.7 MPa, outer versus inner sites) and the Poisson’s ratio ν21 (0.67±0.22 versus 1.6±0.7, outer versus inner), but not in the axial modulus (0.8±0.9 MPa) or the Poisson’s ratios ν12 (1.8±1.4) or ν13 (0.6±0.7). These properties were implemented in a linear anisotropic material model of the AF to determine a complete set of model properties and to predict material behaviors for the AF under idealized kinematic states. These predictions demonstrate that interactions between fiber populations in the multilamellae AF significantly contribute to the material behavior, suggesting that a model for the AF as concentric and physically isolated lamellae may not be appropriate.

Sign in / Sign up

Export Citation Format

Share Document