scholarly journals 𝒫𝒯-symmetric and antisymmetric nonlinear states in a split potential box

2018 ◽  
Vol 376 (2124) ◽  
pp. 20170369 ◽  
Author(s):  
Zhaopin Chen ◽  
Yongyao Li ◽  
Boris A. Malomed
Keyword(s):  
Stability Boundary ◽  
Analytical Form ◽  
Dissipative Structures ◽  
Total Power ◽  
Symmetric System ◽  
Effective Height ◽  
Antisymmetric State ◽  
The Stability ◽  
Double Well Potential ◽  
Stability Area

We introduce a one-dimensional -symmetric system, which includes the cubic self-focusing, a double-well potential in the form of an infinitely deep potential box split in the middle by a delta-functional barrier of an effective height ε , and constant linear gain and loss, γ , in each half-box. The system may be readily realized in microwave photonics. Using numerical methods, we construct -symmetric and antisymmetric modes, which represent, respectively, the system’s ground state and first excited state, and identify their stability. Their instability mainly leads to blowup, except for the case of ε =0, when an unstable symmetric mode transforms into a weakly oscillating breather, and an unstable antisymmetric mode relaxes into a stable symmetric one. At ε >0, the stability area is much larger for the -antisymmetric state than for its symmetric counterpart. The stability areas shrink with increase of the total power, P . In the linear limit, which corresponds to , the stability boundary is found in an analytical form. The stability area of the antisymmetric state originally expands with the growth of γ , and then disappears at a critical value of γ . This article is part of the theme issue ‘Dissipative structures in matter out of equilibrium: from chemistry, photonics and biology (part 1)’.

Tertiary solutions and their stability in rotating plane Couette flow

1998 ◽  
Vol 358 ◽  
pp. 357-378 ◽  
Author(s):  
M. NAGATA
Keyword(s):  
Reynolds Number ◽  
Couette Flow ◽  
Stability Boundary ◽  
Streamwise Vortex ◽  
Reynolds Numbers ◽  
Time Dependent ◽  
Plane Couette Flow ◽  
Streamwise Direction ◽  
The Stability ◽  
Oscillatory Instabilities

The stability of nonlinear tertiary solutions in rotating plane Couette flow is examined numerically. It is found that the tertiary flows, which bifurcate from two-dimensional streamwise vortex flows, are stable within a certain range of the rotation rate when the Reynolds number is relatively small. The stability boundary is determined by perturbations which are subharmonic in the streamwise direction. As the Reynolds number is increased, the rotation range for the stable tertiary motions is destroyed gradually by oscillatory instabilities. We expect that the tertiary flow is overtaken by time-dependent motions for large Reynolds numbers. The results are compared with the recent experimental observation by Tillmark & Alfredsson (1996).

Nonstationary Response of a Two-Degrees-of-Freedom Nonlinear Ship Model Under Modulated Excitation

1995 ◽  
Author(s):  
Ruigui Pan ◽  
Huw G. Davies
Keyword(s):  
Degrees Of Freedom ◽  
Stability Boundary ◽  
Period Doubling ◽  
Approximate Solutions ◽  
Loss Of Stability ◽  
Two Degrees Of Freedom ◽  
Ship Model ◽  
Nonstationary Response ◽  
Period 2 ◽  
The Stability

Abstract Nonstationary response of a two-degrees-of-freedom system with quadratic coupling under a time varying modulated amplitude sinusoidal excitation is studied. The nonlinearly coupled pitch and roll ship model is based on Nayfeh, Mook and Marshall’s work for the case of stationary excitation. The ship model has a 2:1 internal resonance and is excited near the resonance of the pitch mode. The modulated excitation (F0 + F1 cos ωt) cosQt is used to model a narrow band sea-wave excitation. The response demonstrates a variety of bifurcations, loss of stability, and chaos phenomena that are not present in the stationary case. We consider here the periodically modulated response. Chaotic response of the system is discussed in a separate paper. Several approximate solutions, under both small and large modulating amplitudes F1, are obtained and compared with the exact one. The stability of an exact solution with one mode having zero amplitude is studied. Loss of stability in this case involves either a rapid transition from one of two stable (in the stationary sense) branches to another, or a period doubling bifurcation. From Floquet theory, various stability boundary diagrams are obtained in F1 and F0 parameter space which can be used to predict the various transition phenomena and the period-2 bifurcations. The study shows that both the modulation parameters F1 and ω (the modulating frequency) have great effect on the stability boundaries. Because of the modulation, the stable area is greatly expanded, and the stationary bifurcation point can be exceeded without loss of stability. Decreasing ω can make the stability boundary very complicated. For very small ω the response can make periodic transitions between the two (pseudo) stable solutions.

scholarly journals Flexural-Torsional Vibration of Thin-Walled Beams Subjected to Combined Initial Axial Load and End Bending Moment: Application to the Design of Saw Tooth Blades

2019 ◽  
Vol 2019 ◽  
pp. 1-11
Author(s):  
Van Binh Phung ◽  
Anh Tuan Nguyen ◽  
Hoang Minh Dang ◽  
Thanh-Phong Dao ◽  
V. N. Duc
Keyword(s):  
Boundary Conditions ◽  
Axial Load ◽  
Stability Boundary ◽  
Bending Moment ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Rayleigh Method ◽  
Thin Walled ◽  
The Stability ◽  
Fixed End

The present paper analyzes the vibration issue of thin-walled beams under combined initial axial load and end moment in two cases with different boundary conditions, specifically the simply supported-end and the laterally fixed-end boundary conditions. The analytical expressions for the first natural frequencies of thin-walled beams were derived by two methods that are a method based on the existence of the roots theorem of differential equation systems and the Rayleigh method. In particular, the stability boundary of a beam can be determined directly from its first natural frequency expression. The analytical results are in good agreement with those from the finite element analysis software ANSYS Mechanical APDL. The research results obtained here are useful for those creating tooth blade designs of innovative frame saw machines.

Double-diffusive instabilities in a vertical slot

1999 ◽  
Vol 392 ◽  
pp. 213-232 ◽  
Author(s):  
OLIVER S. KERR ◽  
KIT YEE TANG
Keyword(s):  
Temperature Difference ◽  
Salinity Gradient ◽  
Stability Boundary ◽  
Large Temperature ◽  
Vertical Slot ◽  
Stability And Instability ◽  
Heat Diffusivity ◽  
Prandtl Numbers ◽  
The Stability ◽  
Double Diffusive

A fluid stably stratified by a salinity gradient and enclosed between two vertical boundaries can become unstable when it is subjected to a temperature difference between the walls. The linear stability of such a fluid in a vertical slot is investigated. Errors in earlier results are found, confirming recent results of Young & Rosner (1998). Four different asymptotic regimes on the stability boundary are identified. One of these, the limit of a strong salinity gradient, has previously been analysed. The analyses of the separate asymptotic limits of weak salinity gradient, large temperature difference and small wavenumber are also given. These four cases make up much of the total boundary between stability and instability for double-diffusive instabilities in a vertical slot, and so most of this boundary can be mapped out for general Prandtl numbers and salt/heat diffusivity ratios using these results.

Instability of Heated Panels in Supersonic Air Flow

2008 ◽  
Vol 33-37 ◽  
pp. 1101-1108
Author(s):  
Zhi Chun Yang ◽  
Wei Xia
Keyword(s):  
Stability Analysis ◽  
Stability Boundary ◽  
Boundary Curve ◽  
Static Stability ◽  
Static Deformation ◽  
Limit Cycle Oscillation ◽  
Aerodynamic Load ◽  
Aeroelastic System ◽  
Aerodynamic Pressure ◽  
The Stability

An investigation on the stability of heated panels in supersonic airflow is performed. The nonlinear aeroelastic model for a two-dimensional panel is established using Galerkin method and the thermal effect on the panel stiffness is also considered. The quasi-steady piston theory is employed to calculate the aerodynamic load on the panel. The static and dynamic stabilities for flat panels are studied using Lyapunov indirect method and the stability boundary curve is obtained. The static deformation of a post-buckled panel is then calculated and the local stability of the post-buckling equilibrium is analyzed. The limit cycle oscillation of the post-buckled panel is simulated in time domain. The results show that a two-mode model is suitable for panel static stability analysis and static deformation calculation; but more than four modes are required for dynamic stability analysis. The effects of temperature elevation and dimensionless parameters related to panel length/thickness ratio, material density and Mach number on the stability of heated panel are studied. It is found that panel flutter may occur at relatively low aerodynamic pressure when several stable equilibria exist for the aeroelastic system of heated panel.

scholarly journals Fully localized post-buckling states of cylindrical shells under axial compression

2017 ◽  
Vol 473 (2205) ◽  
pp. 20170177 ◽  
Author(s):  
Tobias Kreilos ◽  
Tobias M. Schneider
Keyword(s):  
Axial Compression ◽  
Stability Boundary ◽  
Axial Direction ◽  
Edge State ◽  
Equilibrium Solutions ◽  
Thin Cylindrical Shell ◽  
Nonlinear Force ◽  
Post Buckling ◽  
The Stability ◽  
Nonlinear Solutions

We compute nonlinear force equilibrium solutions for a clamped thin cylindrical shell under axial compression. The equilibrium solutions are dynamically unstable and located on the stability boundary of the unbuckled state. A fully localized single dimple deformation is identified as the edge state —the attractor for the dynamics restricted to the stability boundary. Under variation of the axial load, the single dimple undergoes homoclinic snaking in the azimuthal direction, creating states with multiple dimples arranged around the central circumference. Once the circumference is completely filled with a ring of dimples, snaking in the axial direction leads to further growth of the dimple pattern. These fully nonlinear solutions embedded in the stability boundary of the unbuckled state constitute critical shape deformations. The solutions may thus be a step towards explaining when the buckling and subsequent collapse of an axially loaded cylinder shell is triggered.

scholarly journals Lyapunov Based Estimation of Flight Stability Boundary under Icing Conditions

2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Binbin Pei ◽  
Haojun Xu ◽  
Yuan Xue
Keyword(s):  
Equilibrium Point ◽  
External Disturbance ◽  
Stability Boundary ◽  
Wind Tunnel Test ◽  
Test Results ◽  
Theoretical Support ◽  
Effect Model ◽  
Short Period ◽  
The Stability ◽  
Period Model

Current fight boundary of the envelope protection in icing conditions is usually defined by the critical values of state parameters; however, such method does not take the interrelationship of each parameter and the effect of the external disturbance into consideration. This paper proposes constructing the stability boundary of the aircraft in icing conditions through analyzing the region of attraction (ROA) around the equilibrium point. Nonlinear icing effect model is proposed according to existing wind tunnel test results. On this basis, the iced polynomial short period model can be deduced further to obtain the stability boundary under icing conditions using ROA analysis. Simulation results for a series of icing severity demonstrate that, regardless of the icing severity, the boundary of the calculated ROA can be treated as an estimation of the stability boundary around an equilibrium point. The proposed methodology is believed to be a promising way for ROA analysis and stability boundary construction of the aircraft in icing conditions, and it will provide theoretical support for multiple boundary protection of icing tolerant flight.

Sign in / Sign up

Export Citation Format

Share Document