scholarly journals Theory of cytoskeletal reorganization during crosslinker-mediated mitotic spindle assembly

2018 ◽  
Author(s):  
A. R. Lamson ◽  
C. J. Edelmaier ◽  
M. A. Glaser ◽  
M. D. Betterton
Keyword(s):  
Mitotic Spindle ◽  
Large Scale ◽  
Dynamic Instability ◽  
Kinetic Monte Carlo ◽  
Spindle Assembly ◽  
Spindle Pole ◽  
Balance Model ◽  
Cytoskeletal Reorganization ◽  
Bipolar Spindle ◽  
Mitotic Spindle Assembly

AbstractCells grow, move, and respond to outside stimuli by large-scale cytoskeletal reorganization. A prototypical example of cytoskeletal remodeling is mitotic spindle assembly, during which micro-tubules nucleate, undergo dynamic instability, bundle, and organize into a bipolar spindle. Key mechanisms of this process include regulated filament polymerization, crosslinking, and motor-protein activity. Remarkably, using passive crosslinkers, fission yeast can assemble a bipolar spindle in the absence of motor proteins. We develop a torque-balance model that describes this reorganization due to dynamic microtubule bundles, spindle-pole bodies, the nuclear envelope, and passive crosslinkers to predict spindle-assembly dynamics. We compare these results to those obtained with kinetic Monte Carlo-Brownian dynamics simulations, which include crosslinker-binding kinetics and other stochastic effects. Our results show that rapid crosslinker reorganization to microtubule overlaps facilitates crosslinker-driven spindle assembly, a testable prediction for future experiments. Combining these two modeling techniques, we illustrate a general method for studying cytoskeletal network reorganization.

scholarly journals Kinesin-5 Is Dispensable for Bipolar Spindle Formation and Elongation in Candida albicans, but Simultaneous Loss of Kinesin-14 Activity Is Lethal

mSphere ◽  
2019 ◽  
Vol 4 (6) ◽  
Author(s):  
Irsa Shoukat ◽  
Corey Frazer ◽  
John S. Allingham
Keyword(s):  
Candida Albicans ◽  
Mitotic Spindle ◽  
Fungal Pathogens ◽  
Spindle Assembly ◽  
Spindle Pole ◽  
Content Type ◽  
Bipolar Spindle ◽  
Spindle Elongation ◽  
Simultaneous Loss ◽  
Bipolar Spindles

ABSTRACT Mitotic spindles assume a bipolar architecture through the concerted actions of microtubules, motors, and cross-linking proteins. In most eukaryotes, kinesin-5 motors are essential to this process, and cells will fail to form a bipolar spindle without kinesin-5 activity. Remarkably, inactivation of kinesin-14 motors can rescue this kinesin-5 deficiency by reestablishing the balance of antagonistic forces needed to drive spindle pole separation and spindle assembly. We show that the yeast form of the opportunistic fungus Candida albicans assembles bipolar spindles in the absence of its sole kinesin-5, CaKip1, even though this motor exhibits stereotypical cell-cycle-dependent localization patterns within the mitotic spindle. However, cells lacking CaKip1 function have shorter metaphase spindles and longer and more numerous astral microtubules. They also show defective hyphal development. Interestingly, a small population of CaKip1-deficient spindles break apart and reform two bipolar spindles in a single nucleus. These spindles then separate, dividing the nucleus, and then elongate simultaneously in the mother and bud or across the bud neck, resulting in multinucleate cells. These data suggest that kinesin-5-independent mechanisms drive assembly and elongation of the mitotic spindle in C. albicans and that CaKip1 is important for bipolar spindle integrity. We also found that simultaneous loss of kinesin-5 and kinesin-14 (CaKar3Cik1) activity is lethal. This implies a divergence from the antagonistic force paradigm that has been ascribed to these motors, which could be linked to the high mitotic error rate that C. albicans experiences and often exploits as a generator of diversity. IMPORTANCE Candida albicans is one of the most prevalent fungal pathogens of humans and can infect a broad range of niches within its host. This organism frequently acquires resistance to antifungal agents through rapid generation of genetic diversity, with aneuploidy serving as a particularly important adaptive mechanism. This paper describes an investigation of the sole kinesin-5 in C. albicans, which is a major regulator of chromosome segregation. Contrary to other eukaryotes studied thus far, C. albicans does not require kinesin-5 function for bipolar spindle assembly or spindle elongation. Rather, this motor protein associates with the spindle throughout mitosis to maintain spindle integrity. Furthermore, kinesin-5 loss is synthetically lethal with loss of kinesin-14—canonically an opposing force producer to kinesin-5 in spindle assembly and anaphase. These results suggest a significant evolutionary rewiring of microtubule motor functions in the C. albicans mitotic spindle, which may have implications in the genetic instability of this pathogen.

scholarly journals Targeting Alp7/TACC to the spindle pole body is essential for mitotic spindle assembly in fission yeast

FEBS Letters ◽  
2014 ◽  
Vol 588 (17) ◽  
pp. 2814-2821 ◽  
Author(s):  
Ngang Heok Tang ◽  
Naoyuki Okada ◽  
Chii Shyang Fong ◽  
Kunio Arai ◽  
Masamitsu Sato ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Mitotic Spindle ◽  
Spindle Pole Body ◽  
Spindle Assembly ◽  
Spindle Pole ◽  
Pole Body ◽  
Mitotic Spindle Assembly

scholarly journals Kinetochore-driven formation of kinetochore fibers contributes to spindle assembly during animal mitosis

2004 ◽  
Vol 167 (5) ◽  
pp. 831-840 ◽  
Author(s):  
Helder Maiato ◽  
Conly L. Rieder ◽  
Alexey Khodjakov
Keyword(s):  
Mitotic Spindle ◽  
Spindle Assembly ◽  
Spindle Pole ◽  
S2 Cells ◽  
Spindle Poles ◽  
Drosophila S2 Cells ◽  
Mitotic Spindle Assembly ◽  
Normal Mitosis ◽  
Proper Orientation ◽  
Dependent Mechanism

It is now clear that a centrosome-independent pathway for mitotic spindle assembly exists even in cells that normally possess centrosomes. The question remains, however, whether this pathway only activates when centrosome activity is compromised, or whether it contributes to spindle morphogenesis during a normal mitosis. Here, we show that many of the kinetochore fibers (K-fibers) in centrosomal Drosophila S2 cells are formed by the kinetochores. Initially, kinetochore-formed K-fibers are not oriented toward a spindle pole but, as they grow, their minus ends are captured by astral microtubules (MTs) and transported poleward through a dynein-dependent mechanism. This poleward transport results in chromosome bi-orientation and congression. Furthermore, when individual K-fibers are severed by laser microsurgery, they regrow from the kinetochore outward via MT plus-end polymerization at the kinetochore. Thus, even in the presence of centrosomes, the formation of some K-fibers is initiated by the kinetochores. However, centrosomes facilitate the proper orientation of K-fibers toward spindle poles by integrating them into a common spindle.

scholarly journals Thirty years of search and capture: The complex simplicity of mitotic spindle assembly

2015 ◽  
Vol 211 (6) ◽  
pp. 1103-1111 ◽  
Author(s):  
Rebecca Heald ◽  
Alexey Khodjakov
Keyword(s):  
Cell Division ◽  
Mitotic Spindle ◽  
Spindle Assembly ◽  
Microtubule Dynamics ◽  
Adaptive Changes ◽  
Bipolar Spindle ◽  
Chromosome Architecture ◽  
Self Assembling ◽  
Motor Activities ◽  
Mitotic Spindle Assembly

Cell division is enacted by a microtubule-based, self-assembling macromolecular machine known as the mitotic spindle. In 1986, Kirschner and Mitchison proposed that by undergoing dynamic cycles of growth and disassembly, microtubules search for chromosomes. Capture of microtubules by the kinetochores progressively connects chromosomes to the bipolar spindle. 30 years later, “search and capture” remains the cornerstone of spindle assembly. However, a variety of facilitating mechanisms such as regulation of microtubule dynamics by diffusible gradients, spatially selective motor activities, and adaptive changes in chromosome architecture have been discovered. We discuss how these mechanisms ensure that the spindle assembles rapidly and with a minimal number of errors.

scholarly journals Cooperative Accumulation of Dynein-Dynactin at Microtubule Minus-Ends Drives Microtubule Network Reorganization

2017 ◽  
Author(s):  
Ruensern Tan ◽  
Peter J. Foster ◽  
Daniel J. Needleman ◽  
Richard J. McKenney
Keyword(s):  
Mitotic Spindle ◽  
Large Scale ◽  
Spindle Assembly ◽  
Cytoplasmic Dynein ◽  
List Type ◽  
Microtubule Network ◽  
Cellular Processes ◽  
Dynein Motor ◽  
Mitotic Spindle Assembly ◽  
Orientation Bias

SummaryCytoplasmic dynein-1 (dynein) is minus-end directed motor protein that transports cargo over long distances and organizes microtubules (MTs) during critical cellular processes such as mitotic spindle assembly. How dynein motor activity is harnessed for these diverse functions remains unknown. Here, we have uncovered a mechanism for how processive dynein-dynactin complexes drive MT-MT sliding, reorganization, and focusing, activities required for mitotic spindle assembly. We find that motors cooperatively accumulate, in limited numbers, at MT minus-ends. Minus-end accumulations drive MT-MT sliding, independent of MT orientation, and this activity always results in the clustering of MT minus-ends. At a mesoscale level, activated dynein-dynactin drives the formation and coalescence of MT asters. Macroscopically, dynein-dynactin activity leads to bulk contraction of millimeter-scale MT networks, demonstrating that minus-end accumulations produce network scale contractile stresses. Our data provides a model for how localized dynein activity is harnessed by cells to produce contractile stresses within the mitotic spindle.HighlightsProcessive dynein-dynactin complexes cooperatively form stable accumulations at MT minus-ends.Minus-end accumulations of motors slide MTs without orientation bias, leading to minus-end focusing.Minus-end accumulations of motors organize dynamic MTs into asters.Minus-end accumulations of motors drive bulk contractions of large-scale MT networks.

scholarly journals Nup98 regulates bipolar spindle assembly through association with microtubules and opposition of MCAK

2011 ◽  
Vol 22 (5) ◽  
pp. 661-672 ◽  
Author(s):  
Marie K. Cross ◽  
Maureen A. Powers
Keyword(s):  
Nuclear Pore Complex ◽  
Mitotic Spindle ◽  
Spindle Assembly ◽  
Microtubule Dynamics ◽  
Nuclear Pore ◽  
Bipolar Spindle ◽  
Terminal Domain ◽  
C Terminus ◽  
Mitotic Spindle Assembly

During mitosis, the nuclear pore complex is disassembled and, increasingly, nucleoporins are proving to have mitotic functions when released from the pore. We find a contribution of the nucleoporin Nup98 to mitotic spindle assembly through regulation of microtubule dynamics. When added to Xenopus extract spindle assembly assays, the C-terminal domain of Nup98 stimulates uncontrolled growth of microtubules. Conversely, inhibition or depletion of Nup98 leads to formation of stable monopolar spindles. Spindle bipolarity is restored by addition of purified, recombinant Nup98 C-terminus. The minimal required region of Nup98 corresponds to a portion of the C-terminal domain lacking a previously characterized function. We show association between this region of the C-terminus of Nup98 and both Taxol-stabilized microtubules and the microtubule-depolymerizing mitotic centromere–associated kinesin (MCAK). Importantly, we demonstrate that this domain of Nup98 inhibits MCAK depolymerization activity in vitro. These data support a model in which Nup98 interacts with microtubules and antagonizes MCAK activity, thus promoting bipolar spindle assembly.

scholarly journals Mechanisms of chromosome biorientation and bipolar spindle assembly analyzed by computational modeling

eLife ◽  
2020 ◽  
Vol 9 ◽  
Author(s):  
Christopher Edelmaier ◽  
Adam R Lamson ◽  
Zachary R Gergely ◽  
Saad Ansari ◽  
Robert Blackwell ◽  
...  
Keyword(s):  
Mitotic Spindle ◽  
Spindle Assembly ◽  
Extensive Study ◽  
Bipolar Spindle ◽  
Microtubule Attachment ◽  
Anaphase Onset ◽  
Length Regulation ◽  
Mitotic Spindle Assembly ◽  
Early Mitosis ◽  
Segregation Of Chromosomes

The essential functions required for mitotic spindle assembly and chromosome biorientation and segregation are not fully understood, despite extensive study. To illuminate the combinations of ingredients most important to align and segregate chromosomes and simultaneously assemble a bipolar spindle, we developed a computational model of fission-yeast mitosis. Robust chromosome biorientation requires progressive restriction of attachment geometry, destabilization of misaligned attachments, and attachment force dependence. Large spindle length fluctuations can occur when the kinetochore-microtubule attachment lifetime is long. The primary spindle force generators are kinesin-5 motors and crosslinkers in early mitosis, while interkinetochore stretch becomes important after biorientation. The same mechanisms that contribute to persistent biorientation lead to segregation of chromosomes to the poles after anaphase onset. This model therefore provides a framework to interrogate key requirements for robust chromosome biorientation, spindle length regulation, and force generation in the spindle.

scholarly journals Mechanisms of chromosome biorientation and bipolar spindle assembly analyzed by computational modeling

2019 ◽  
Author(s):  
Christopher J. Edelmaier ◽  
Adam R. Lamson ◽  
Zachary R. Gergely ◽  
Saad Ansari ◽  
Robert Blackwell ◽  
...  
Keyword(s):  
Mitotic Spindle ◽  
Spindle Assembly ◽  
Extensive Study ◽  
Bipolar Spindle ◽  
Microtubule Attachment ◽  
Anaphase Onset ◽  
Length Regulation ◽  
Mitotic Spindle Assembly ◽  
Early Mitosis ◽  
Segregation Of Chromosomes

AbstractThe essential functions required for mitotic spindle assembly and chromosome biorientation and segregation are not fully understood, despite extensive study. To illuminate the combinations of ingredients most important to align and segregate chromosomes and simultaneously assemble a bipolar spindle, we developed a computational model of fission-yeast mitosis. Robust chromosome biorientation requires progressive restriction of attachment geometry, destabilization of misaligned attachments, and attachment force dependence. Large spindle length fluctuations can occur when the kinetochore-microtubule attachment lifetime is long. The primary spindle force generators are kinesin-5 motors and crosslinkers in early mitosis, while interkinetochore stretch becomes important after biorientation. The same mechanisms that contribute to persistent biorientation lead to segregation of chromosomes to the poles after anaphase onset. This model therefore provides a framework to interrogate key requirements for robust chromosome biorientation, spindle length regulation, and force generation in the spindle.

scholarly journals Microtubule pivoting enables mitotic spindle assembly in S. cerevisiae

2021 ◽  
Vol 220 (3) ◽  
Author(s):  
Kimberly K. Fong ◽  
Trisha N. Davis ◽  
Charles L. Asbury
Keyword(s):  
Mitotic Spindle ◽  
Spindle Assembly ◽  
Force Generation ◽  
Initial Contact ◽  
Bipolar Spindle ◽  
Spindle Poles ◽  
Mitotic Spindle Assembly ◽  
Spindle Microtubules ◽  
Pole Component

To assemble a bipolar spindle, microtubules emanating from two poles must bundle into an antiparallel midzone, where plus end–directed motors generate outward pushing forces to drive pole separation. Midzone cross-linkers and motors display only modest preferences for antiparallel filaments, and duplicated poles are initially tethered together, an arrangement that instead favors parallel interactions. Pivoting of microtubules around spindle poles might help overcome this geometric bias, but the intrinsic pivoting flexibility of the microtubule–pole interface has not been directly measured, nor has its importance during early spindle assembly been tested. By measuring the pivoting of microtubules around isolated yeast spindle poles, we show that pivoting flexibility can be modified by mutating a microtubule-anchoring pole component, Spc110. By engineering mutants with different flexibilities, we establish the importance of pivoting in vivo for timely pole separation. Our results suggest that passive thermal pivoting can bring microtubules from side-by-side poles into initial contact, but active minus end–directed force generation will be needed to achieve antiparallel alignment.

Sign in / Sign up

Export Citation Format

Share Document