scholarly journals Smart HBs in the design of crystals, molecular devices and functional materials

2004 ◽  
Vol 60 (a1) ◽  
pp. s65-s65
Author(s):  
P. Gilli ◽  
L. Pretto ◽  
G. Gilli
2021 ◽  
Vol 118 (47) ◽  
pp. e2112973118
Author(s):  
Xin Zhang ◽  
Yu-Dong Yang ◽  
Zhi-Hao Lu ◽  
Li-Jin Xu ◽  
Jonathan L. Sessler ◽  
...  

We report a molecular switching ensemble whose states may be regulated in synergistic fashion by both protonation and photoirradiation. This allows hierarchical control in both a kinetic and thermodynamic sense. These pseudorotaxane-based molecular devices exploit the so-called Texas-sized molecular box (cyclo[2]-(2,6-di(1H-imidazol-1-yl)pyridine)[2](1,4-dimethylenebenzene); 14+, studied as its tetrakis-PF6− salt) as the wheel component. Anions of azobenzene-4,4′-dicarboxylic acid (2H+•2) or 4,4′-stilbenedicarboxylic acid (2H+•3) serve as the threading rod elements. The various forms of 2 and 3 (neutral, monoprotonated, and diprotonated) interact differently with 14+, as do the photoinduced cis or trans forms of these classic photoactive guests. The net result is a multimodal molecular switch that can be regulated in synergistic fashion through protonation/deprotonation and photoirradiation. The degree of guest protonation is the dominating control factor, with light acting as a secondary regulatory stimulus. The present dual input strategy provides a complement to more traditional orthogonal stimulus-based approaches to molecular switching and allows for the creation of nonbinary stimulus-responsive functional materials.


2021 ◽  
Author(s):  
Meiying Liu ◽  
Jingjing Liang ◽  
Zhiliang Liu

Molecular ferroelectrics as a class of functional materials have broad application in information storage and molecular devices. It is necessary to expand ferroelectric family or modulate ferroelectricity in order to...


2020 ◽  
Vol 13 (4) ◽  
pp. 311-467
Author(s):  
Oskar I. Koifman ◽  
Tatyana A. Ageeva ◽  
Irina P. Beletskaya ◽  
Alexei D. Averin ◽  
Alexei A. Yakushev ◽  
...  

Author(s):  
Yoichi Ishida ◽  
Hideki Ichinose ◽  
Yutaka Takahashi ◽  
Jin-yeh Wang

Layered materials draw attention in recent years in response to the world-wide drive to discover new functional materials. High-Tc superconducting oxide is one example. Internal interfaces in such layered materials differ significantly from those of cubic metals. They are often parallel to the layer of the neighboring crystals in sintered samples(layer plane boundary), while periodically ordered interfaces with the two neighboring crystals in mirror symmetry to each other are relatively rare. Consequently, the atomistic features of the interface differ significantly from those of cubic metals. In this paper grain boundaries in sintered high-Tc superconducting oxides, joined interfaces between engineering ceramics with metals, and polytype interfaces in vapor-deposited bicrystal are examined to collect atomic information of the interfaces in layered materials. The analysis proved that they are not neccessarily more complicated than that of simple grain boundaries in cubic metals. The interfaces are majorly layer plane type which is parallel to the compound layer. Secondly, chemical information is often available, which helps the interpretation of the interface atomic structure.


2020 ◽  
Vol 11 (48) ◽  
pp. 7603-7624
Author(s):  
Ismail Altinbasak ◽  
Mehmet Arslan ◽  
Rana Sanyal ◽  
Amitav Sanyal

This review provides an overview of synthetic approaches utilized to incorporate the thiol-reactive pyridyl-disulfide motif into various polymeric materials, and briefly highlights its utilization to obtain functional materials.


Planta Medica ◽  
2012 ◽  
Vol 78 (11) ◽  
Author(s):  
SH Kim ◽  
MJ Lee ◽  
J Han ◽  
CE Lee

2020 ◽  
Vol 64 (1-4) ◽  
pp. 201-210
Author(s):  
Yoshikazu Tanaka ◽  
Satoru Odake ◽  
Jun Miyake ◽  
Hidemi Mutsuda ◽  
Atanas A. Popov ◽  
...  

Energy harvesting methods that use functional materials have attracted interest because they can take advantage of an abundant but underutilized energy source. Most vibration energy harvester designs operate most effectively around their resonant frequency. However, in practice, the frequency band for ambient vibrational energy is typically broad. The development of technologies for broadband energy harvesting is therefore desirable. The authors previously proposed an energy harvester, called a flexible piezoelectric device (FPED), that consists of a piezoelectric film (polyvinylidene difluoride) and a soft material, such as silicon rubber or polyethylene terephthalate. The authors also proposed a system based on FPEDs for broadband energy harvesting. The system consisted of cantilevered FPEDs, with each FPED connected via a spring. Simply supported FPEDs also have potential for broadband energy harvesting, and here, a theoretical evaluation method is proposed for such a system. Experiments are conducted to validate the derived model.


2020 ◽  
Vol 4 (1) ◽  
pp. 17-29
Author(s):  
Isma Attique ◽  
Shabbir Hussain ◽  
Muhammad Amjad ◽  
Khalida Nazir ◽  
Muhammad Shahid Nazir

Fluorine has a useful positron transmitting isotope and it enjoys broad application in the medical field. It is utilized in fluorinated agents,therapeutic sciences and steroid field. Fluorine incorporation viafluoroalkylation is a useful approach in the development of new functional materials and in drug design. Fluorine also plays its role as an anticancer agent and is a successful chemotherapeutic agent for certain sorts of malignant growth. 5-fluorouracil plays a vital role in the treatment of cancer. 18 Facts as a radio label tracer atom in PET imaging. 19 F has the second most sensitive and stable NMR-active nucleus.


Sign in / Sign up

Export Citation Format

Share Document