Design of a 2 T multipole wiggler insertion device for the SRS

1998 ◽  
Vol 5 (3) ◽  
pp. 434-436 ◽  
Author(s):  
James A. Clarke ◽  
Neil Bliss ◽  
David Bradshaw ◽  
Cheryl Dawson ◽  
Barry Fell ◽  
...  
Keyword(s):  
Finite Element ◽  
Permanent Magnet ◽  
Engineering Design ◽  
Mechanical Design ◽  
High Flux ◽  
Support Structure ◽  
X Ray ◽  
Insertion Device

Two new identical insertion devices have been designed for the Daresbury SRS. They are 2 T permanent-magnet multipole wigglers that will provide high flux in the X-ray region. This paper describes the magnetic and mechanical design of the arrays of steel pole pieces and permanent-magnet blocks. Also given is the engineering design of the support structure that will cope with the very large forces present while maintaining high levels of precision in gap setting and parallelism. The engineering design has been fully assessed using finite-element techniques to predict the deflections of critical parts of the structure. These two devices are due to be installed into the SRS by the end of 1998.

Analysis of magnetic force and dynamic characteristic for non-contact permanent magnet linear drive device

2020 ◽  
Vol 64 (1-4) ◽  
pp. 1337-1345
Author(s):  
Chuan Zhao ◽  
Feng Sun ◽  
Junjie Jin ◽  
Mingwei Bo ◽  
Fangchao Xu ◽  
...  
Keyword(s):  
Finite Element ◽  
Permanent Magnet ◽  
Dynamic Characteristic ◽  
Driving Force ◽  
Magnetic Circuit ◽  
Response Speed ◽  
Computation Method ◽  
Element Analysis ◽  
Element Simulation ◽  
The Relationship

This paper proposes a computation method using the equivalent magnetic circuit to analyze the driving force for the non-contact permanent magnet linear drive system. In this device, the magnetic driving force is related to the rotation angle of driving wheels. The relationship is verified by finite element analysis and measuring experiments. The result of finite element simulation is in good agreement with the model established by the equivalent magnetic circuit. Then experiments of displacement control are carried out to test the dynamic characteristic of this system. The controller of the system adopts the combination control of displacement and angle. The results indicate that the system has good performance in steady-state error and response speed, while the maximum overshoot needs to be reduced.

Static and Dynamic Characteristic Analysis of the Tower for Vertical Axis Wind Turbine Based on Finite Element Method

2012 ◽  
Vol 229-231 ◽  
pp. 613-616
Author(s):  
Yan Jue Gong ◽  
Yuan Yuan Zhang ◽  
Fu Zhao ◽  
Hui Yu Xiang ◽  
Chun Ling Meng ◽  
...  
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Wind Turbine ◽  
Dynamic Characteristic ◽  
Optimization Design ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Characteristic Analysis ◽  
Support Structure ◽  
Element Method

As an important part of the vertical axis wind turbine, the support structure should have high strength and stiffness. This article adopts finite element method to model a kind of tower structure of the vertical axis wind turbine and carry out static and modal analysis. The static and dynamic characteristic results of tower in this paper provide reference for optimization design the support structure of wind turbine further.

scholarly journals Design and Analysis of a Dual Airgap Radial Flux Permanent Magnet Vernier Machine with Yokeless Rotor

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2311
Author(s):  
Mudassir Raza Siddiqi ◽  
Tanveer Yazdan ◽  
Jun-Hyuk Im ◽  
Muhammad Humza ◽  
Jin Hur
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Permanent Magnet ◽  
Flux Linkage ◽  
Element Analysis ◽  
Cogging Torque ◽  
Torque Density ◽  
Stator Windings ◽  
Radial Flux ◽  
Torque Ripples

This paper presents a novel topology of dual airgap radial flux permanent magnet vernier machine (PMVM) in order to obtain a higher torque per magnet volume and similar average torque compared to a conventional PMVM machine. The proposed machine contains two stators and a sandwiched yokeless rotor. The yokeless rotor helps to reduce the magnet volume by providing an effective flux linkage in the stator windings. This effective flux linkage improved the average torque of the proposed machine. The competitiveness of the proposed vernier machine was validated using 2D finite element analysis under the same machine volume as that of conventional vernier machine. Moreover, cogging torque, torque ripples, torque density, losses, and efficiency performances also favored the proposed topology.

scholarly journals Mechanical design and finite element analysis of live working robot for 10kV distribution power systems

2021 ◽  
Vol 183 ◽  
pp. 331-336
Author(s):  
Zhang Liming ◽  
He Yulong ◽  
Xu Shanjun ◽  
Zhang Tong ◽  
Guo Junlong ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Power Systems ◽  
Mechanical Design ◽  
Element Analysis
Sign in / Sign up

Export Citation Format

Share Document