Low-temperature martensite relaxation in Co–Ni–Ga shape memory alloy monocrystal revealed using in situ cooling, transmission electron microscopy and low rate calorimetry

2020 ◽  
Vol 76 (4) ◽  
pp. 563-571
Author(s):  
Andrzej Żak ◽  
Anna Dańczak ◽  
Włodzimierz Dudziński
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Low Temperature ◽  
Shape Memory ◽  
Precise Determination ◽  
Magnetic Shape Memory ◽  
Scanning Calorimetry ◽  
Cooling Rates ◽  
Transmission Electron

This work presents the results of research on a Co49Ni21Ga30 magnetic shape memory single crystal. Based on a literature review, it was identified that analyses of phase transformations have been limited to specific heating and cooling rates, which could lead to an incomplete description of the resulting phenomena. Differential scanning calorimetry (DSC) performed with different heating/cooling rates enabled the precise determination of enthalpy values, which deviate from literature values. Weak and previously unnoticed thermal phenomena at temperatures below 190 K were also observed. Their presence was confirmed by low-temperature in situ transmission electron microscopy (TEM). Through DSC measurements and TEM observations, a model of the discovered phenomenon was proposed, which may have an impact on a better understanding of the physics of magnetic shape memory materials.

scholarly journals In situ environmental HRTEM discloses low temperature carbon soot oxidation by ceria–zirconia at the nanoscale

2019 ◽  
Vol 55 (27) ◽  
pp. 3876-3878 ◽  
Author(s):  
Eleonora Aneggi ◽  
Jordi Llorca ◽  
Alessandro Trovarelli ◽  
Mimoun Aouine ◽  
Philippe Vernoux
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Low Temperature ◽  
Room Temperature ◽  
Soot Oxidation ◽  
Environmental Transmission ◽  
Transmission Electron ◽  
Carbon Soot ◽  
Environmental Transmission Electron Microscopy

In situ environmental transmission electron microscopy discloses room temperature carbon soot oxidation by ceria–zirconia at the nanoscale.

Reactions in Metal-Metalloid Multilayers

1993 ◽  
Vol 311 ◽  
Author(s):  
Robert Sinclair ◽  
Toyohiko J. Konno
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Reactive Systems ◽  
Nucleation And Growth ◽  
In Situ Observation ◽  
Scanning Calorimetry ◽  
Compound Formation ◽  
Transmission Electron

ABSTRACTWe have studied the reactions at metal-metalloid interfaces using high resolution transmission electron microscopy, including in situ observation, and differential scanning calorimetry. There is contrasting behavior depending on the affinity for interaction or segregation. For reactive systems, compound formation ultimately results, but this can be preceded by solidstate amorphization. For non-reactive systems, crystallization of the metalloid is often achieved with nucleation and growth mediated by the metal phase.

In situ Transmission Electron Microscopy and Nanoindentation Studies of Phase Transformation and Pseudoelasticity of Shape-memory Titanium-nickel Films

2005 ◽  
Vol 20 (7) ◽  
pp. 1808-1813 ◽  
Author(s):  
X.-G. Ma ◽  
K. Komvopoulos
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Phase Transformation ◽  
Shape Memory ◽  
Heating And Cooling ◽  
Transmission Electron ◽  
Different Temperatures ◽  
Titanium Nickel ◽  
In Situ Heating

Transmission electron microscopy (TEM) and nanoindentation, both with in situ heating capability, and electrical resistivity measurements were used to investigate phase transformation phenomena and thermomechanical behavior of shape-memory titanium-nickel (TiNi) films. The mechanisms responsible for phase transformation in the nearly equiatomic TiNi films were revealed by heating and cooling the samples inside the TEM vacuum chamber. Insight into the deformation behavior of the TiNi films was obtained from the nanoindentation response at different temperatures. A transition from elastic-plastic to pseudoelastic deformation of the martensitic TiNi films was encountered during indentation and heating. In contrast to the traditional belief, the martensitic TiNi films exhibited a pseudoelastic behavior during nanoindentation within a specific temperature range. This unexpected behavior is interpreted in terms of the evolution of martensitic variants and changes in the mobility of the twinned structures in the martensitic TiNi films, observed with the TEM during in situ heating.

Low temperature formation and evolution of a 10 nm amorphous Ni–Si layer on [001] silicon studied by in situ transmission electron microscopy

2009 ◽  
Vol 105 (9) ◽  
pp. 093506 ◽  
Author(s):  
Alessandra Alberti ◽  
Corrado Bongiorno ◽  
Cristian Mocuta ◽  
Till Metzger ◽  
Corrado Spinella ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Low Temperature ◽  
Transmission Electron ◽  
Formation And Evolution

Low-temperature instability of Ti2SnC: A combined transmission electron microscopy, differential scanning calorimetry, and x-ray diffraction investigations

2009 ◽  
Vol 24 (1) ◽  
pp. 39-49 ◽  
Author(s):  
J. Zhang ◽  
B. Liu ◽  
J.Y. Wang ◽  
Y.C. Zhou
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Low Temperature ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Temperature Instability ◽  
X Ray ◽  
Transmission Electron ◽  
Ceramic Microstructure

Transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and x-ray diffraction (XRD) investigations were conducted on the hot-pressed Ti2SnC bulk ceramic. Microstructure features of bulk Ti2SnC ceramic were characterized by using TEM, and a needle-shaped β-Sn precipitation was observed inside Ti2SnC grains with the orientation relationship: (0001) Ti2SnC // (200) Sn and Ti2SnC // [001] Sn. With the combination of DSC and XRD analyses, the precipitation of metallic Sn was demonstrated to be a thermal stress-induced process during the cooling procedure. The reheating temperature, even as low as 400 °C, could trigger the precipitation of Sn from Ti2SnC, which indicated the low-temperature instability of Ti2SnC. A substoichiometry Ti2SnxC formed after depletion of Sn from ternary Ti2SnC phase. Under electron beam irradiation, metallic Sn was observed diffusing back into Ti2SnxC. Furthermore, a new Ti7SnC6 phase with the lattice constants of a = 0.32 and c = 4.1 nm was identified and added in the Ti-Sn-C ternary system.

Low Temperature in Situ Cleaning of Si(100) Surfaces and Transmission Electron Microscopy of Subsequent Growth of Epitaxial Germanium

1988 ◽  
Vol 116 ◽  
Author(s):  
R.A. Rudder ◽  
S.V. Hattangady ◽  
J.B. Posthill ◽  
R.J. Markunas
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Low Temperature ◽  
Carbonaceous Material ◽  
High Energy ◽  
Wafer Surface ◽  
Hydrogen Treatment ◽  
Heteroepitaxial Growth ◽  
Transmission Electron

AbstractA low temperature process for cleaning Si(100) surfaces has been developed. It involves a combination of a modified hot RCA wet chemistry treatment and an in situ hydrogen treatment for the removal of oxides and carbonaceous material from the Si surface. While this treatment is successful in producing reflection high energy electron diffraction patterns which show 1/2-order reconstruction lines, subsequent Ge heteroepitaxial growth at 300°C contains a high density of microtwins. Transmission electron microscopy reveals that most of the microtwins do not propagate to the wafer surface. Furthermore, the Ge/Si interface is not abrupt, and there are regions that do not appear crystalline. This suggests that some contamination is still present on the Si(100) surface after the in situ hydrogen treatments.

Sign in / Sign up

Export Citation Format

Share Document