Are high-fit CSR programs always better? The effects of corporate reputation and CSR fit on stakeholder responses

2019 ◽  
Vol 24 (3) ◽  
pp. 471-498 ◽  
Author(s):  
Yeonsoo Kim ◽  
Mary Ann Ferguson

Purpose The purpose of this paper is to examine how corporate reputation interacts with corporate social responsibility (CSR) fit and affects stakeholders’ skeptical attribution (SA) of CSR motives, as well as their attitudes, supportive communication intent and purchase intent. This study proposes that a high-fit CSR program does not necessarily engender more favorable outcomes, nor does it stimulate SA. The study proposes the effects of CSR fit differ by corporate reputation. For bad-reputation companies, low-fit is anticipated to generate more desirable CSR outcomes than high-fit initiatives. Design/methodology/approach Two experiments were conducted. The first experiment employed a randomized 2 (CSR fit: high fit vs low fit) × 2 (good reputation vs bad reputation) × 2 (Industry: food retailing and insurance) full factorial design to examine the suggested hypotheses. The second study employed a randomized 2 (CSR fit: high fit vs low fit) × 2 (good reputation vs bad reputation) full factorial design with consumer samples to replicate the conceptual relationships among variables in the first study. Findings While reputation plays a dominant role in influencing stakeholders’ CSR-related responses across both CSR fit situations, a SA partially mediates the relationship between reputation and stakeholder reactions. CSR fit interacts with reputation, and influences the partial mediation process through SA; under a bad reputation condition, low-fit CSR engenders less SA and results in better stakeholder reactions. A similar tendency was found with supportive communication intent and purchase intent. High-fit CSR initiatives by a negative reputation company engendered the weakest supportive intent and purchase intent. For a reputable company, across both CSR fits, respondents displayed generally very positive attitudes toward, greater intent to support, and intent to purchase from the company. Originality/value The study findings provide useful and empirically supported logical explanations of why high-fit CSR programs sometimes cause backlash effects, despite the general consensus that such initiatives generate positive outcomes. This study offers an alternative and more relevant perspective to conceptualize the complexity of anticipating CSR outcomes.

2015 ◽  
Vol 32 (7) ◽  
pp. 693-702 ◽  
Author(s):  
Zhen He ◽  
Xu-tao Zhang ◽  
Gui-qing Xie ◽  
Min Zhang

Purpose – The purpose of this paper is to improve the key quality performance of the terminal of earphone in an electronic company. Design/methodology/approach – Sequential experimental designs are employed. Significant input variables are found through a full factorial design. Then a response surface model is constructed considering curvature in the linear model. Findings – Optimized key input variables’ parameters are found using the response surface model. The key quality performance, coplanarity of the terminal of earphone has been improved. Research limitations/implications – Instead of running a full factorial design in the first stage, a fractional factorial may be used to reduce experimental runs. Practical implications – The paper presents a good solution for reducing defects caused by large coplanarity of a kind of earphone terminal. Originality/value – The methodology used in this case can be easily extended to similar cases.


2020 ◽  
Vol 17 (6) ◽  
pp. 523-539
Author(s):  
Jalpa Patel ◽  
Dhaval Mori

Background: Developing a new excipient and obtaining its market approval is an expensive, time-consuming and complex process. Compared to that, the co-processing of already approved excipients has emerged as a more attractive option for bringing better characteristic excipients to the market. The application of the Design of Experiments (DoE) approach for developing co-processed excipient can make the entire process cost-effective and rapid. Objective: The aim of the present investigation was to demonstrate the applicability of the DoE approach, especially 32 full factorial design, to develop a multi-functional co-processed excipient for the direct compression of model drug - cefixime trihydrate using spray drying technique. Methods: The preliminary studies proved the significant effect of atomization pressure (X1) and polymer ratio (microcrystalline cellulose: mannitol - X2) on critical product characteristics, so they were selected as independent variables. The angle of repose, Carr’s index, Hausner’s ratio, tensile strength and Kuno’s constant were selected as response variables. Result: The statistical analysis proved a significant effect of both independent variables on all response variables with a significant p-value < 0.05. The desirability function available in Design Expert 11® software was used to prepare and select the optimized batch. The prepared co-processed excipient had better compressibility than individual excipients and their physical mixture and was able to accommodate more than 40 percent drug without compromising the flow property and compressibility. Conclusion: The present investigation successfully proved the applicability of 32 full factorial design as an effective tool for optimizing the spray drying process to prepare a multi-functional co-processed excipient.


2020 ◽  
Vol 17 (5) ◽  
pp. 422-437
Author(s):  
Dixita Jain ◽  
Akshay Sodani ◽  
Swapnanil Ray ◽  
Pranab Ghosh ◽  
Gouranga Nandi

Aim: This study was focused on the formulation of the multi-unit extended-release peroral delivery device of lamotrigine for better management of epilepsy. Background: The single-unit extended-release peroral preparations often suffer from all-or-none effect. A significant number of multi-unit delivery systems have been reported as a solution to this problem. But most of them are found to be composed of synthetic, semi-synthetic or their combination having physiological toxicity as well as negative environmental impact. Therefore, fabrication and formulation of multi-unit extended-release peroral preparations with natural, non-toxic, biodegradable polymers employing green manufacturing processes are being appreciated worldwide. Objective: Lamotrigine-loaded extended-release multi-unit beads have been fabricated with the incorporation of a natural polysaccharide Cassia fistula seed gum in calcium-cross-linked alginate matrix employing a simple green process and 23 full factorial design. Methods: The total polymer concentration, polymer ratio and [CaCl2] were considered as independent formulation variables with two different levels of each for the experiment-design. The extended-release beads were then prepared by the ionotropic gelation method using calcium chloride as the crosslinkerions provider. The beads were then evaluated for drug encapsulation efficiency and drug release. ANOVA of all the dependent variables such as DEE, cumulative % drug release at 2h, 5h, 12h, rate constant and dissolution similarity factor (f2) was done by 23 full factorial design using Design-Expert software along with numerical optimization of the independent variables in order to meet USP-reference release profile. Results: The optimized batch showed excellent outcomes with DEE of 84.7 ± 2.7 (%), CPR2h of 8.41± 2.96 (%), CPR5h of 36.8± 4.7 (%), CPR12h of 87.3 ± 3.64 (%) and f2 of 65.9. Conclusion: This approach of the development of multi-unit oral devices utilizing natural polysaccharides might be inspiring towards the world-wide effort for green manufacturing of sustained-release drug products by the QbD route.


2020 ◽  
Vol 9 (6) ◽  
pp. 16072-16079
Author(s):  
C.A.G. Aita ◽  
I.C. Goss ◽  
T.S. Rosendo ◽  
M.D. Tier ◽  
A. Wiedenhöft ◽  
...  

2008 ◽  
Vol 25 (3) ◽  
pp. 435-442 ◽  
Author(s):  
F. N. B. Nahui ◽  
M. R. Nascimento ◽  
E. B. Cavalcanti ◽  
E. O. Vilar

Sign in / Sign up

Export Citation Format

Share Document