Spatial correlation-aware statistical dual-threshold voltage design of template-based asynchronous circuits

2018 ◽  
Vol 37 (3) ◽  
pp. 1189-1203
Author(s):  
Behnam Ghavami
Keyword(s):  
Low Power ◽  
Spatial Correlation ◽  
Threshold Voltage ◽  
High Performance ◽  
Process Variations ◽  
Low Power Design ◽  
Asynchronous Circuits ◽  
Asynchronous Circuit ◽  
Content Type ◽  
Dual Threshold Voltage

Purpose Power consumption is a top priority in high-performance asynchronous circuit design today. The purpose of this study is to provide a spatial correlation-aware statistical dual-threshold voltage design method for low-power design of template-based asynchronous circuits. Design/methodology/approach In this paper, the authors proposed a statistical dual-threshold voltage design of template-based asynchronous circuits considering process variations with spatial correlation. The utilized circuit model is an extended Timed Petri-Net which captures the dynamic behavior of the asynchronous circuit with statistical delay and power values. To have a more comprehensive framework, the authors model the spatial correlation information of the circuit. The authors applied a genetic optimization algorithm that uses a two-dimensional graph to calculate the power and performance of each threshold voltage assignment. Findings Experimental results show that using this statistically aware optimization, leakage power of asynchronous circuits can be reduced up to 3X. The authors also show that the spatial correlation may lead to large errors if not being considered in the design of dual-threshold-voltage asynchronous circuits. Originality/value The proposed framework is the scheme giving a low-power design of asynchronous circuits compared to other schemes. The comparison exhibits that the proposed method has better results in terms of performance and power. To consider the process variations with spatial correlation, the authors apply the principle component analysis method to transform the correlated variables into uncorrelated ones.

LOW-POWER, PARALLEL INTERFACE WITH CONTINUOUS-TIME ADAPTIVE PASSIVE EQUALIZER AND CROSSTALK CANCELLATION

2005 ◽  
Vol 15 (02) ◽  
pp. 459-476
Author(s):  
C. PATRICK YUE ◽  
JAEJIN PARK ◽  
RUIFENG SUN ◽  
L. RICK CARLEY ◽  
FRANK O'MAHONY
Keyword(s):  
Low Power ◽  
Electromagnetic Interference ◽  
Continuous Time ◽  
High Speed ◽  
High Performance ◽  
Process Variations ◽  
Cmos Process ◽  
Power Circuit ◽  
Crosstalk Cancellation ◽  
Circuit Components

This paper presents the low-power circuit techniques suitable for high-speed digital parallel interfaces each operating at over 10 Gbps. One potential application for such high-performance I/Os is the interface between the channel IC and the magnetic read head in future compact hard disk systems. First, a crosstalk cancellation technique using a novel data encoding scheme is introduced to suppress electromagnetic interference (EMI) generated by the adjacent parallel I/Os . This technique is implemented utilizing a novel 8-4-PAM signaling with a data look-ahead algorithm. The key circuit components in the high-speed interface transceiver including the receive sampler, the phase interpolator, and the transmitter output driver are described in detail. Designed in a 0.13-μm digital CMOS process, the transceiver consumes 310 mW per 10-Gps channel from a I-V supply based on simulation results. Next, a 20-Gbps continuous-time adaptive passive equalizer utilizing on-chip lumped RLC components is described. Passive equalizers offer the advantages of higher bandwidth and lower power consumption compared with conventional designs using active filter. A low-power, continuous-time servo loop is designed to automatically adjust the equalizer frequency response for the optimal gain compensation. The equalizer not only adapts to different channel characteristics, but also accommodates temperature and process variations. Implemented in a 0.25-μm, 1P6M BiCMOS process, the equalizer can compensate up to 20 dB of loss at 10 GHz while only consumes 32 mW from a 2.5-V supply.

scholarly journals Design of high performance, low power sub thresholds ram using source coupled logic for implantable applications.

2018 ◽  
Vol 7 (2.12) ◽  
pp. 205
Author(s):  
T Vasudeva Reddy ◽  
Dr B.K. Madhavi
Keyword(s):  
Low Power ◽  
High Performance ◽  
Supply Voltage ◽  
Process Variations ◽  
Primary Objective ◽  
Total Power ◽  
Threshold Region ◽  
Major Power ◽  
Low Power Circuits ◽  
Power Circuits

Low power circuits functioning in sub threshold were proposed in earlier seventies. Recently, growing with the need of low power consumption, the low power circuits have became more attractive. However, the act of sub threshold design logics has become sensitive to the supply voltage & process variations like temperature and so on. In sub threshold region of operations the supply voltage (Vgs) is less than the threshold (Vth).This leads to less power dissipation in over all circuit, but drastically increment in propagation delay. The major intention of the paper is to offer new low power & less delay digital circuits. SRAM is the major power drawing element and dissipation is about 40% in total power. The primary objective is to design of sub threshold SRAM design, Functionality and performance is estimated from the power and delay.The second objective is to offer novel Source coupled logic based SRAM (ST-SC SRA) M & Operating these design under sub threshold operating region. Performance is analyzed through power and delay. Finally comparing the traditional sub threshold SRAM with source coupled based SRAM in power and delay on par with the performance. Discussing some of the applications, where there is a requirement of less power and delay. 

scholarly journals Design of Low Power Digital Multiplier Using Dual Threshold Voltage Adder Module

2012 ◽  
Vol 30 ◽  
pp. 1179-1186 ◽  
Author(s):  
L. Raja ◽  
B.M. Prabhu ◽  
K. Thanushkodi
Keyword(s):  
Low Power ◽  
Threshold Voltage ◽  
Dual Threshold Voltage
Sign in / Sign up

Export Citation Format

Share Document