Numerical investigation of anguilliform locomotion by the SPH method

2019 ◽  
Vol 30 (1) ◽  
pp. 328-346 ◽  
Author(s):  
Amin Rahmat ◽  
Hossein Nasiri ◽  
Marjan Goodarzi ◽  
Ehsan Heidaryan
Keyword(s):  
Drag Coefficient ◽  
Numerical Investigation ◽  
Sph Method ◽  
Content Type ◽  
Aquatic Locomotion ◽  
Wide Range ◽  
Particle Hydrodynamics ◽  
Dummy Particles ◽  
Smoothed Particle ◽  
Sph Algorithm

Purpose This paper aims to introduce a numerical investigation of aquatic locomotion using the smoothed particle hydrodynamics (SPH) method. Design/methodology/approach To model this problem, a simple improved SPH algorithm is presented that can handle complex geometries using updatable dummy particles. The computational code is validated by solving the flow over a two-dimensional cylinder and comparing its drag coefficient for two different Reynolds numbers with those in the literature. Findings Additionally, the drag coefficient and vortices created behind the aquatic swimmer are quantitatively and qualitatively compared with available credential data. Afterward, the flow over an aquatic swimmer is simulated for a wide range of Reynolds and Strouhal numbers, as well as for the amplitude envelope. Moreover, comprehensive discussions on drag coefficient and vorticity patterns behind the aquatic are made. Originality/value It is found that by increasing both Reynolds and Strouhal numbers separately, the anguilliform motion approaches the self-propulsion condition; however, the vortices show different pattern with these increments.

Numerical simulation of dissolution of solid particles in fluid flow using the SPH method

2019 ◽  
Vol 30 (1) ◽  
pp. 290-307 ◽  
Author(s):  
Amin Rahmat ◽  
Mostafa Barigou ◽  
Alessio Alexiadis
Keyword(s):  
Three Dimensional ◽  
Solid Particles ◽  
Sph Method ◽  
Content Type ◽  
Wide Range ◽  
Particle Hydrodynamics ◽  
Schmidt Numbers ◽  
Smoothed Particle ◽  
Diffusion Mass ◽  
Mass Transport Equation

Purpose The purpose of this paper is to numerically study the dissolution of solid particles using the smoothed particle hydrodynamics (SPH) method. Design/methodology/approach To implement dissolution, an advection–diffusion mass transport equation is solved over computational particles. Subsequently, these particles disintegrate from the solute when their concentration falls below a certain threshold. Findings It is shown that the implementation of dissolution is in good agreement with available data in the literature. The dissolution of solid particles is studied for a wide range of Reynolds and Schmidt numbers. Two-dimensional (2D) results are compared with three-dimensional (3D) cases to identify where 2D results are accurate for modelling 3D dissolution phenomena. Originality/value The present numerical model is capable of addressing related problems in pharmaceutical, biochemical, food processing and detergent industries.

Incompressible smoothed particle hydrodynamics for MHD double-diffusive natural convection of a nanofluid in a cavity containing an oscillating pipe

2019 ◽  
Vol 30 (2) ◽  
pp. 882-917 ◽  
Author(s):  
Abdelraheem M. Aly
Keyword(s):  
Natural Convection ◽  
Smoothed Particle Hydrodynamics ◽  
Cavity Wall ◽  
Lagrangian Description ◽  
Content Type ◽  
Wide Range ◽  
Particle Hydrodynamics ◽  
Smoothed Particle ◽  
Incompressible Smoothed Particle Hydrodynamics ◽  
Double Diffusive

Purpose This paper aims to adopt incompressible smoothed particle hydrodynamics (ISPH) method to simulate MHD double-diffusive natural convection in a cavity containing an oscillating pipe and filled with nanofluid. Design/methodology/approach The Lagrangian description of the governing partial differential equations are solved numerically using improved ISPH method. The inner oscillating pipe is divided into two different pipes as an open and a closed pipe. The sidewalls of the cavity are cooled with a lower concentration C_c and the horizontal walls are adiabatic. The inner pipe is heated with higher concentration C_h. The analysis has been conducted for the two different cases of inner oscillating pipes under the effects of wide range of governing parameters. Findings It is found that a suitable oscillating pipe makes a well convective transport inside a cavity. Presence of the oscillating pipe has effects on the heat and mass transfer and fluid intensity inside a cavity. Hartman parameter suppresses the velocity and weakens the maximum values of the stream function. An increase on Hartman, Lewis and solid volume fraction parameters leads to an increase on average Nusselt number on an oscillating pipe and left cavity wall. Average Sherwood number on an oscillating pipe and left cavity wall decreases as Hartman parameter increases. Originality/value The main objective of this work is to study the MHD double-diffusive natural convection of a nanofluid in a square cavity containing an oscillating pipe using improved ISPH method.

Geometrically nonlinear analysis of two-dimensional structures using an improved smoothed particle hydrodynamics method

2015 ◽  
Vol 32 (3) ◽  
pp. 779-805 ◽  
Author(s):  
Jun Lin ◽  
Hakim Naceur ◽  
Daniel Coutellier ◽  
Abdel Laksimi
Keyword(s):  
Nonlinear Analysis ◽  
Smoothed Particle Hydrodynamics ◽  
Time Integration ◽  
Geometrically Nonlinear ◽  
Sph Method ◽  
Geometrically Nonlinear Analysis ◽  
Content Type ◽  
Particle Hydrodynamics ◽  
Sph Model ◽  
Smoothed Particle

Purpose – The purpose of this paper is to present an efficient smoothed particle hydrodynamics (SPH) method particularly adapted for the geometrically nonlinear analysis of structures. Design/methodology/approach – In order to resolve the inconsistency phenomenon which systematically occurs in the standard SPH method at the domain’s boundaries of the studied structure, the classical kernel function and its spatial derivatives were modified by the use of Taylor series expansion. The well-known tensile instabilities inherent to the Eulerian SPH formulation were attenuated by the use of the Total Lagrangian Formulation (TLF). Findings – In order to demonstrate the effectiveness of the present improved SPH method, several numerical applications involving geometrically nonlinear behaviors were carried out using the explicit dynamics scheme for the time integration of the PDEs. Comparisons of the obtained results using the present SPH model with analytical reference solutions and with those obtained using ABAQUS finite element (FE) commercial software, show its good accuracy and robustness. Practical implications – An additional application including a multilayered composite structure and involving buckling and delamination was investigated using the present improved SPH model and the results are compared to the FE results, they confirmed both the efficiency and the accuracy of the proposed method. Originality/value – An efficient 2D-continuum SPH model for the geometrically nonlinear analysis of thin and thick structures is proposed. Contrarily to the classical SPH approaches, here the constitutive material relations are used to link naturally the stresses and strains. The Total Lagrangian approach is investigated to alleviate the tensile instabilities problem, allowing at the same time to avoid the updating procedure of the neighboring particles search and therefore reducing CPU usage. The proposed approach is valid for isotropic and multilayered composites structures undergoing large transformations. CPU time savings and better results with the new 2D-continuum SPH formulation compared to the classical continuum SPH. The explicit dynamic scheme was used for time integration allowing a fast resolution algorithm even for highly nonlinear problems.

scholarly journals Effect of Bird Yaw/Pitch Angles on Soft Impact Damage of a Fan Assembly

Complexity ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Junjie Li ◽  
Yunfeng Lou ◽  
Gaoyuan Yu ◽  
Tong Li ◽  
Xianlong Jin
Keyword(s):  
Numerical Investigation ◽  
Smoothed Particle Hydrodynamics ◽  
Pitch Angle ◽  
Impact Damage ◽  
Bird Strike ◽  
Sph Method ◽  
Rotating Blades ◽  
Particle Hydrodynamics ◽  
Smoothed Particle ◽  
Yaw Angle

This paper presents a numerical investigation of bird attitude angles affecting the soft-impact damage of a full fan assembly. Firstly, considering the geometry of a mallard, a real bird model is established by the Smoothed Particle Hydrodynamics (SPH) method and calibrated with available test data. Then, complying with airworthiness requirements, simulations of a full-bladed fan assembly subjected to a real bird were conducted to determine the critical ingestion parameters (CIP). Furthermore, a real bird with different attitude angles aimed at a full fan assembly was simulated. Results show that attitude angles of the bird produce a significant impact on the effect of the bird strike on rotating blades and would increase the possibility of blade failures, especially for the yaw angle of -45° and the pitch angle of −60°. It is invaluable for commercial airlines and engine manufactures to provide safe flight and landing by adopting the real bird model with critical yaw and pitch angles in the design for resistance to bird ingestion.

Investigation of Wave Characteristics in Oscillatory Motion of Partially Filled Rectangular Tanks

2017 ◽  
Vol 140 (4) ◽  
Author(s):  
M. Ozbulut ◽  
N. Tofighi ◽  
O. Goren ◽  
M. Yildiz
Keyword(s):  
Dynamic Properties ◽  
Fluid Motion ◽  
Oscillatory Motion ◽  
Response Analysis ◽  
Governing Equations ◽  
Sph Method ◽  
Wave Response ◽  
Wide Range ◽  
Particle Hydrodynamics ◽  
Smoothed Particle

Simulations of oscillatory motion in partially filled rectangular tanks with different tank geometries, fullness ratios, and motion frequencies are presented. Smoothed particle hydrodynamics (SPH) method is used to discretize the governing equations together with new velocity variance-based free surface (VFS) and artificial particle displacement (APD) algorithms to enhance the robustness and the accuracy of the numerical scheme. Two-dimensional (2D) oscillatory motion is investigated for three different scenarios where the first one scrutinizes the kinematic characteristics in resonance conditions, the second one covers a wave response analysis in a wide range of enforced motion frequencies, and the last one examines the dynamic properties of the fluid motion in detail. The simulations are carried on for at least 50 periods in the wave response analysis. It is shown that numerical results of the proposed SPH scheme are in match with experimental and numerical findings of the literature.

scholarly journals Numerical Simulation of Non-Homogeneous Viscous Debris-Flows Based on the Smoothed Particle Hydrodynamics (SPH) Method

Water ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 2314 ◽  
Author(s):  
Shu Wang ◽  
Anping Shu ◽  
Matteo Rubinato ◽  
Mengyao Wang ◽  
Jiping Qin
Keyword(s):  
Debris Flow ◽  
Water Content ◽  
Smoothed Particle Hydrodynamics ◽  
Debris Flows ◽  
Sph Method ◽  
Particle Hydrodynamics ◽  
Sph Model ◽  
Smoothed Particle ◽  
The Impact ◽  
Kinetic And Potential Energies

Non-homogeneous viscous debris flows are characterized by high density, impact force and destructiveness, and the complexity of the materials they are made of. This has always made these flows challenging to simulate numerically, and to reproduce experimentally debris flow processes. In this study, the formation-movement process of non-homogeneous debris flow under three different soil configurations was simulated numerically by modifying the formulation of collision, friction, and yield stresses for the existing Smoothed Particle Hydrodynamics (SPH) method. The results obtained by applying this modification to the SPH model clearly demonstrated that the configuration where fine and coarse particles are fully mixed, with no specific layering, produces more fluctuations and instability of the debris flow. The kinetic and potential energies of the fluctuating particles calculated for each scenario have been shown to be affected by the water content by focusing on small local areas. Therefore, this study provides a better understanding and new insights regarding intermittent debris flows, and explains the impact of the water content on their formation and movement processes.

scholarly journals Progress in the Smoothed Particle Hydrodynamics Method to Simulate and Post-process Numerical Simulations of Annular Airblast Atomizers

2020 ◽  
Vol 105 (4) ◽  
pp. 1119-1147
Author(s):  
G. Chaussonnet ◽  
T. Dauch ◽  
M. Keller ◽  
M. Okraschevski ◽  
C. Ates ◽  
...  
Keyword(s):  
Smoothed Particle Hydrodynamics ◽  
Flux Ratio ◽  
Liquid Sheet ◽  
Sph Method ◽  
Post Process ◽  
Finite Time Lyapunov Exponent ◽  
Fragmentation Spectrum ◽  
Particle Hydrodynamics ◽  
Primary Breakup ◽  
Smoothed Particle

AbstractThis paper illustrates recent progresses in the development of the smoothed particle hydrodynamics (SPH) method to simulate and post-process liquid spray generation. The simulation of a generic annular airblast atomizer is presented, in which a liquid sheet is fragmented by two concentric counter swirling air streams. The accent is put on how the SPH method can bridge the gap between the CAD geometry of a nozzle and its characterization, in terms of spray characteristics and dynamics. In addition, the Lagrangian nature of the SPH method allows to extract additional data to give further insight in the spraying process. First, the sequential breakup events can be tracked from one large liquid blob to very fine stable droplets. This is herein called the tree of fragmentation. From this tree of fragmentation, abstract quantities can be drawn such as the breakup activity and the fragmentation spectrum. Second, the Lagrangian coherent structures in the turbulent flow can be determined easily with the finite-time Lyapunov exponent (FTLE). The extraction of the FTLE is particularly feasible in the SPH framework. Finally, it is pointed out that there is no universal and ultimate non-dimensional number that can characterize airblast primary breakup. Depending on the field of interest, a non-dimensional number (e.g. Weber number) might be more appropriate than another one (e.g. momentum flux ratio) to characterize the regime, and vice versa.

scholarly journals Application of Smoothed Particle Hydrodynamics (SPH) for the Simulation of Flow-like Landslides on 3D Terrains

2022 ◽  
Author(s):  
Binghui Cui ◽  
Liaojun Zhang
Keyword(s):  
Risk Assessment ◽  
Smoothed Particle Hydrodynamics ◽  
Disaster Mitigation ◽  
Sph Method ◽  
Landslide Event ◽  
Particle Hydrodynamics ◽  
Smoothed Particle ◽  
Simulation Results ◽  
Mitigation Design ◽  
The Impact

Abstract Flow-type landslide is one type of landslide that generally exhibits characteristics of high flow velocities, long jump distances, and poor predictability. Simulation of it facilitates propagation analysis and provides solutions for risk assessment and mitigation design. The smoothed particle hydrodynamics (SPH) method has been successfully applied to the simulation of two-dimensional (2D) and three-dimensional (3D) flow-like landslides. However, the influence of boundary resistance on the whole process of landslide failure is rarely discussed. In this study, a boundary algorithm considering the friction is proposed, and integrated into the boundary condition of the SPH method, and its accuracy is verified. Moreover, the Navier-Stokes equation combined with the non-Newtonian fluid rheology model was utilized to solve the dynamic behavior of the flow-like landslide. To verify its performance, the Shuicheng landslide event, which occurred in Guizhou, China, was taken as a case study. In the 2D simulation, a sensitivity analysis was conducted, and the results showed that the shearing strength parameters have more influence on the computation accuracy in comparison with the coefficient of viscosity. Afterwards, the dynamic characteristics of the landslide, such as the velocity and the impact area, were analyzed in the 3D simulation. The simulation results are in good agreement with the field investigations. The simulation results demonstrate that the SPH method performs well in reproducing the landslide process, and facilitates the analysis of landslide characteristics as well as the affected areas, which provides a scientific basis for conducting the risk assessment and disaster mitigation design.

Smoothed Particle Hydrodynamics into the Fluid Dynamics of Classical Problems

2016 ◽  
Vol 846 ◽  
pp. 73-78 ◽  
Author(s):  
Maziar Gholami Korzani ◽  
S. Galindo Torres ◽  
Alexander Scheuermann ◽  
David J. Williams
Keyword(s):  
Fluid Dynamics ◽  
Analytical Solutions ◽  
Poiseuille Flow ◽  
Smoothed Particle Hydrodynamics ◽  
Slip Boundary Condition ◽  
Sph Method ◽  
Slip Boundary ◽  
Particle Hydrodynamics ◽  
Smoothed Particle ◽  
Computational Fluid Dynamics Cfd

The study concerns the application of the Smoothed Particle Hydrodynamics (SPH) method within the computational fluid dynamics (CFD). In the present study, some classical problems – the Poiseuille flow, the Hagen-Poiseuille flow, and the Couette flow – with the analytical solutions were investigated to verify a newly developed code of SPH. The code used for solving these problems, is an entirely parallel SPH solver in 3D and has been developed by the authors. Fluid was modelled as a viscous liquid with weak compressibility. The boundary walls were simulated with a special set of fixed boundary particles, and no-slip boundary condition was considered. Computational results were compared to available analytical solutions for transient hydraulic processes. Good agreement is achieved for the whole transient stage of the considered problems until steady state is reached. The results of this study highlight the potential of SPH to tackle a broad range of problems in fluid mechanics.

Sign in / Sign up

Export Citation Format

Share Document