Heat transfer and entropy generation analysis of Cu-water nanofluid in a vertical channel

2018 ◽  
Vol 15 (5) ◽  
pp. 604-613
Author(s):  
Essma Belahmadi ◽  
Rachid Bessaih
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Mixed Convection ◽  
Friction Factor ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Vertical Channel ◽  
Simple Algorithm ◽  
Content Type

Purpose The purpose of this study is to analyze heat transfer and entropy generation of a Cu-water nanofluid in a vertical channel. The channel walls are maintained at a hot temperature Tw. An up flow penetrates the channel at a uniform velocity v0 and a cold temperature T0 (T0 < Tw). The effects of Reynolds number Re, Grashof number Gr and solid volume fraction ϕ on streamlines, isotherms, entropy generation, friction factor, local and mean Nusselt numbers are evaluated. Design/methodology/approach The Cu-water nanofluid is used in this study. The software Ansys-fluent 14.5, based on the finite-volume method and SIMPLE algorithm, is used to simulate the mixed convection problem with entropy generation in a vertical channel. Findings The results show that the increase of Reynolds and Grashof numbers and solid volume fraction improves heat transfer and reduces entropy generation. Correlations for the mean Nusselt number and friction factor in terms of Reynolds number and solid volume fraction are obtained. The present results are compared with those found in the literature, which reveal a very good agreement. Originality/value The originality of this work is to understand the heat transfer and entropy generation for mixed convection of a Cu-water nanofluid in a vertical channel.

Fluid flow and heat transfer of a stratified system during natural convection – influence of chamfered corners

2019 ◽  
Vol 29 (2) ◽  
pp. 470-486 ◽  
Author(s):  
Alireza Rahimi ◽  
Aravindhan Surendar ◽  
Aygul Z. Ibatova ◽  
Abbas Kasaeipoor ◽  
Emad Hasani Malekshah
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Natural Convection ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Three Dimensional ◽  
Immiscible Fluids ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose This paper aims to investigate the three-dimensional natural convection and entropy generation in the rectangular cuboid cavities included by chamfered triangular partition made by polypropylene. Design/methodology/approach The enclosure is filled by multi-walled carbon nanotubes (MWCNTs)-H2O nanofluid and air as two immiscible fluids. The finite volume approach is used for computation. The fluid flow and heat transfer are considered with combination of local entropy generation due to fluid friction and heat transfer. Moreover, a numerical method is developed based on three-dimensional solution of Navier–Stokes equations. Findings Effects of side ratio of triangular partitions (SR = 0.5, 1 and 2), Rayleigh number (103 < Ra < 105) and solid volume fraction (f = 0.002, 0.004 and 0.01 Vol.%) of nanofluid are investigated on both natural convection characteristic and volumetric entropy generation. The results show that the partitions can be a suitable method to control fluid flow and energy consumption, and three-dimensional solutions renders more accurate results. Originality/value The originality of this work is to study the three-dimensional natural convection and entropy generation of a stratified system.

scholarly journals Numerical Simulation of the Cooling of Heated Electronic Blocks in Horizontal Channel by Mixed Convection of Nanofluids

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Mustapha Ait Hssain ◽  
Rachid Mir ◽  
Youness El Hammami
Keyword(s):  
Heat Transfer ◽  
Mixed Convection ◽  
Volume Fraction ◽  
Numerical Study ◽  
Solid Volume Fraction ◽  
Simple Algorithm ◽  
Separation Distance ◽  
Horizontal Channel ◽  
Laminar Mixed Convection ◽  
Finite Volume Approach

The present work is devoted to the numerical study of steady and laminar mixed convection of nanofluid (water nanoparticles) in a horizontal channel provided with sources of heat at constant temperature, which simulate hot electronic components. The transport equations for continuity, momentum, and energy are solved with finite volume approach using the SIMPLE algorithm. The effective thermal conductivity and the dynamic viscosity of the nanofluid are calculated using, respectively, the Maxwell-Garnett and Brinkman model. The influence of the volume fraction of the nanoparticles 0%≤φ≤10%, Reynolds numbers 5≤Re≤75, the distance between the blocks 0≤d/H≤3, and the types of nanoparticles added (TiO2, Al2O3, CuO, Ag, Cu, and MgO) were investigated and discussed. It emerges from this simulation that the heat transfer increases with the increase in the volume fraction of the nanoparticles and the Reynolds number and decreases with the augmentation of separation distance between heated sources. Moreover, the study shows that the heat transfer is improved by 20% at a solid volume fraction of 10% of Cu nanoparticles.

Numerical analysis of mixed convection of different nanofluids in concentric annulus

2019 ◽  
Vol 29 (4) ◽  
pp. 1506-1525 ◽  
Author(s):  
Ahad Abedini ◽  
Saeed Emadoddin ◽  
Taher Armaghani
Keyword(s):  
Heat Transfer ◽  
Mixed Convection ◽  
Flow Pattern ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Convection Heat Transfer ◽  
Simple Algorithm ◽  
Content Type ◽  
Volume Method

Purpose This study aims to investigate the numerical analysis of mixed convection within the horizontal annulus in the presence of water-based fluid with nanoparticles of aluminum oxide, copper, silver and titanium oxide. Numerical solution is performed using a finite-volume method based on the SIMPLE algorithm, and the discretization of the equations is generally of the second order. Inner and outer cylinders have a constant temperature, and the inner cylinder temperature is higher than the outer one. The two cylinders can be rotated in both directions at a constant angular velocity. The effect of parameters such as Rayleigh, Richardson, Reynolds and the volume fraction of nanoparticles on heat transfer and flow pattern are investigated. The results show that the heat transfer rate increases with the increase of the Rayleigh number, as well as by increasing the volume fraction of the nanoparticles, the heat transfer rate increases, and this increase is about 8.25 per cent for 5 per cent volumetric fraction. Rotation of the cylinders reduces the overall heat transfer. Different directions of rotation have a great influence on the flow pattern and isotherms, and ultimately on heat transfer. The addition of nanoparticles does not have much effect on the flow pattern and isotherms, but it is quantitatively effective. The extracted results are in good agreement with previous works. Design/methodology/approach Studying mixed convection heat transfer in the horizontal annulus in the presence of a water-based fluid with aluminum oxide, copper, silver and titanium oxide nanoparticles is carried out quantitatively using a finite-volume method based on the SIMPLE algorithm. Findings Increasing the Rayleigh number increases the Nusselt number. Increasing the Richardson number increases heat transfer. Adding nanoparticles does not have much effect on the flow pattern but is effective quantitatively on heat transfer parameters. The addition of nanoparticles sometimes increases the heat transfer rate by about 8.25 per cent. In constant Rayleigh numbers, increasing the Reynolds number reduces heat transfer. The Rayleigh and Reynolds numbers greatly affect the isotherms and streamlines. In addition to the thermal conductivity of nanoparticles, the thermo-physical properties of nanoparticles has great effect in the formation of isotherms and streamlines and ultimately heat transfer. Originality/value Studying the effect of different direction of rotation on the isotherms and streamlines, as well as the comparison of different nanoparticles on mixed convection heat transfer in annulus.

Lattice Boltzmann simulation of free convection in nanofluid filled cavity with partially active walls – entropy generation and heatline visualization

2018 ◽  
Vol 28 (10) ◽  
pp. 2254-2283 ◽  
Author(s):  
Alireza Rahimi ◽  
Abbas Kasaeipoor ◽  
Emad Hasani Malekshah ◽  
Lioua Kolsi
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Entropy Generation ◽  
Lattice Boltzmann ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Heat Transfer ◽  
Content Type ◽  
Lattice Boltzmann Simulation

Purpose This paper aims to perform the lattice Boltzmann simulation of natural convection heat transfer in cavities included with active hot and cold walls at the side walls and internal hot and cold obstacles. Design/methodology/approach The cavity is filled with double wall carbon nanotubes (DWCNTs)-water nanofluid. Different approaches such as local and total entropy generation, local and average Nusselt number and heatline visualization are used to analyze the natural convection heat transfer. The cavity is filled with DWCNTs-water nanofluid and the thermal conductivity and dynamic viscosity are measured experimentally at different solid volume fractions of 0.01 per cent, 0.02 per cent, 0.05 per cent, 0.1 per cent, 0.2 per cent and 0.5 per cent and at a temperature range of 300 to 340 (K). Findings Two sets of correlations for these parameters based on temperature and solid volume fraction are developed and used in the numerical simulations. The influences of different governing parameters such as Rayleigh number, solid volume fraction and different arrangements of active walls on the fluid flow, heat transfer and entropy generation are presented, comprehensively. It is found that the different arrangements of active walls have pronounced influence on the flow structure and heat transfer performance. Furthermore, the Nusselt number has direct relationship with Rayleigh number and solid volume fraction. On the other hand, the total entropy generation has direct and reverse relationship with Rayleigh number and solid volume fraction, respectively. Originality/value The originality of this work is to analyze the two-dimensional natural convection using lattice Boltzmann method and different approaches such as entropy generation and heatline visualization.

scholarly journals Entropy generation analysis of mixed convection with considering magnetohydrodynamic effects in an open C-shaped cavity

2019 ◽  
Vol 23 (6 Part A) ◽  
pp. 3455-3465 ◽  
Author(s):  
Taher Armaghani ◽  
Abbas Kasaeipoor ◽  
Usef Mohammadpoor
Keyword(s):  
Heat Transfer ◽  
Aspect Ratio ◽  
Mixed Convection ◽  
Entropy Generation ◽  
Thermal Performance ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Heat Transfer ◽  
Coefficient Of Performance ◽  
Mixed Convection Heat Transfer

This paper studies the effect of a constant magnetic field on the mixed convection heat transfer and the entropy generation of CuO-water nanofluid in an open C-shaped cavity with a numerical method. The governing equations are presented by control volume method and they are solved simultaneously by the SIMPLE algorithm. This study examines the effect of the Hartman number, aspect ratio, Reynolds number, and Richardson number parameters for different solid volume fraction of nanoparticles. Also Nusselt number, entropy generation, thermal performance criteria and coefficient of performance is studied in this research. The calculated parameters are the Hartman number, aspect ratio, Reynolds number, Richardson number, nanofluid solid volume fraction, Nusselt number, and coefficient of performance. The results show that increasing the Hartmann number reduces the entropy generation. However, the thermal performance increases. Increasing the aspect ratio raises heat transfer and thermal performance. The effects of nanofluid solid volume fraction on mixed convection heat transfer and entropy generation are also investigated and discussed.

Magnetohydrodynamic Mixed Convection of a Cu-Water Nanofluid in a Vertical Channel

2013 ◽  
Vol 135 (7) ◽  
Author(s):  
A. Raisi ◽  
S. M. Aminossadati ◽  
B. Ghasemi
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Mixed Convection ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Heat Transfer ◽  
Vertical Channel ◽  
Mixed Convection Heat Transfer

This technical brief numerically examines the mixed convection heat transfer of a Cu-water nanofluid in a parallel-plate vertical channel that is influenced by a magnetic field. An upward flow of Cu-water nanofluid enters the channel at a relatively low temperature and a uniform velocity. It is found that the magnetic field has dissimilar effects on the heat transfer rate at different Richardson numbers. The increase of solid volume fraction results in an increase of the heat transfer rate especially at low Richardson numbers.

Effect of non-uniform asymmetric heating on the thermal and entropy generation characteristics for flow of Al2O3-water nanofluid in a micro-channel

2019 ◽  
Vol 29 (3) ◽  
pp. 981-999 ◽  
Author(s):  
Manash Protim Boruah ◽  
Pitambar R. Randive ◽  
Sukumar Pati
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Reynolds Number ◽  
Phase Difference ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Optimal Choice ◽  
Maximum Heat ◽  
Content Type ◽  
Maximum Heat Transfer

Purpose The purpose of this study is to numerically analyze the thermal and entropy generation characteristics on two-dimensional, incompressible, laminar single-phase flow of Al2O3-water nanofluid in a micro-channel subjected to asymmetric sinusoidal wall heating with varying amplitude, length of fluctuation period and phase difference of applied heat flux for Reynolds number in the range of 25-1000. Design/methodology/approach The numerical computation is based on the Finite Element Method and the Lagrange finite element technique is used for approximating the flow variables within the computational domain. Findings The average Nusselt number increases with increasing Reynolds number (Re) for all the volume fractions of nanofluid. However, the total entropy generation decreases up to a critical value of Re and increases thereafter. Increase in volume fraction shifts the critical Re towards the lower Re regime. The average Nusselt number and total entropy generation increase with amplitude and length of fluctuation period of heat flux. The optimal choice of volume fraction for lesser entropy generation and higher heat transfer is found to be 3 per cent independent of the value of amplitude, length of fluctuation period and phase difference of the heat flux. Originality/value To the best of authors’ knowledge, the interplay of various parameters concerning non-uniform heating in achieving the maximum heat transfer with minimum irreversibility has not been investigated. Focusing on this agenda, the results of this study would benefit the industrial sector in achieving the maximum heat transfer at the cost of minimum irreversibilities with an optimal choice of inlet Reynolds number, volume fraction of nanofluid, amplitude, length of the period of fluctuation of heat flux and phase difference of applied heat flux.

Local entropy generation rate through convective heat transfer in tubes with wire coil inserts

2016 ◽  
Vol 26 (5) ◽  
pp. 1365-1379 ◽  
Author(s):  
Senda Agrebi ◽  
Juan P. Solano ◽  
Ali Snoussi ◽  
Ammar Ben Brahim
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Mixed Convection ◽  
Friction Factor ◽  
Entropy Generation ◽  
Smooth Tube ◽  
Local Entropy ◽  
Content Type ◽  
Wire Coil ◽  
Local Entropy Generation

Purpose – The purpose of this paper is to present a numerical analysis of the flow and heat transfer in a tube with a wire coil insert. A second law analysis of the results is accounted for, in order to assess the local and overall entropy generation in relation with the increased pressure drop and convective heat transfer. A wire coil with p/D=1.25 and e/D=0.076 is selected as insert device. A Reynolds number range between 100 and 1,000 is investigated, which corresponds to the typical operating regimes in the risers of liquid solar collectors. Different wall heat fluxes and inclination angles allow to analyze the potential impact of mixed convection in the presence of tube inserts. Design/methodology/approach – Three-dimensional numerical simulations are performed using a finite-volume solver, assuming laminar flow conditions. Pure water and a mixture of water and propylene-glycol (20 percent) are used as working fluids, with temperature-dependent properties. Fanning friction factor, Nusselt number and local entropy generation results are obtained in the fully developed region. Findings – The friction factor results are successfully compared with a well-known experimental correlation for wire coil inserts. The earlier onset of transition is devised at Re > 300. Nusselt number augmentations between 2.5- and 6-fold are reported with respect to the smooth tube. The mixed convection regime encountered in the smooth tube for the operating conditions investigated is canceled in the wire coiled tube, owing to the opposed effect of the swirl flow induced and the bouyancy forces. Frictional, heat transfer and overall entropy generation rates are computed locally in the fully developed region, allowing to relate these results with the flow structures in the mixed convection smooth tube and in the wire coiled tube. A threefold decrease in the entropy generation rate is reported for tubes with wire coil inserts. Originality/value – An holistic understanding of the heat transfer enhancement in tubes with wire coil inserts is provided through the analysis of the flow pattern, Fanning friction factor, Nusselt number and local entropy generation rates. The reduced entropy generation in the enhanced tube serves as a performance criteria to confirm the positive effect of wire coil inserts in heat transfer for the operating regime under investigation, in spite of the increased pressure drop.

Effect of wall-mounted V-baffle position in a turbulent flow through a channel

2019 ◽  
Vol 29 (10) ◽  
pp. 3908-3937 ◽  
Author(s):  
Younes Menni ◽  
Ahmed Azzi ◽  
Ali J. Chamkha ◽  
Souad Harmand
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Stokes Equations ◽  
Numerical Study ◽  
Rectangular Channel ◽  
Simple Algorithm ◽  
Two Dimensions ◽  
Large Reynolds Number ◽  
Constant Property ◽  
Content Type

Purpose The purpose of this paper is to carry out a numerical study on the dynamic and thermal behavior of a fluid with a constant property and flowing turbulently through a two-dimensional horizontal rectangular channel. The upper surface was put in a constant temperature condition, while the lower one was thermally insulated. Two transverse, solid-type obstacles, having different shapes, i.e. flat rectangular and V-shaped, were inserted into the channel and fixed to the top and bottom walls of the channel, in a periodically staggered manner to force vortices to improve the mixing, and consequently the heat transfer. The flat rectangular obstacle was put in the first position and was placed on the hot top wall of the channel. However, the second V-shaped obstacle was placed on the insulated bottom wall, at an attack angle of 45°; its position was varied to find the optimum configuration for optimal heat transfer. Design/methodology/approach The fluid is considered Newtonian, incompressible with constant properties. The Reynolds averaged Navier–Stokes equations, along with the standard k-epsilon turbulence model and the energy equation, are used to control the channel flow model. The finite volume method is used to integrate all the equations in two-dimensions; the commercial CFD software FLUENT along with the SIMPLE-algorithm is used for pressure-velocity coupling. Various values of the Reynolds number and obstacle spacing were selected to perform the numerical runs, using air as the working medium. Findings The channel containing the flat fin and the 45° V-shaped baffle with a large Reynolds number gave higher heat transfer and friction loss than the one with a smaller Reynolds number. Also, short separation distances between obstacles provided higher values of the ratios Nu/Nu0 and f/f0 and a larger thermal enhancement factor (TEF) than do larger distances. Originality/value This is an original work, as it uses a novel method for the improvement of heat transfer in completely new flow geometry.

scholarly journals Entropy generation of a hybrid nanofluid on MHD mixed convection is a lid-driven cavity with partial heating having two rounded corners

2021 ◽  
Vol 321 ◽  
pp. 02004
Author(s):  
Zakaria Korei ◽  
Smail Benissaad
Keyword(s):  
Thermal Conductivity ◽  
Reynolds Number ◽  
Mixed Convection ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Object Oriented ◽  
Reynolds Numbers ◽  
Hybrid Nanofluid ◽  
Driven Cavity ◽  
Partial Heating

This research aims to investigate thermal and flow behaviors and entropy generation of magnetohydrodynamic Al2O3-Cu/water hybrid nanofluid in a lid-driven cavity having two rounded corners. A solver based on C ++ object-oriented language was developed where the finite volume was used. Parameter’s analysis is provided by varying Reynolds numbers (Re), Hartmann numbers (Ha), the volume fraction of hybrid nanofluid (ϕ), radii of the rounded corners. The findings show that reducing the radii of the rounded corners minimizes the irreversibility. Furthermore, the thermal conductivity and dynamic viscosity of hybrid nanofluid contribute to increasing the irreversibility. Finally, the entropy generation is decreased by increasing the Hartman number and increases by rising the Reynolds number.

Sign in / Sign up

Export Citation Format

Share Document