Performance of combined spectral collocation method and artificial compressibility method for 3D incompressible fluid flow and heat transfer

2020 ◽  
Vol 30 (12) ◽  
pp. 5037-5062
Author(s):  
Jing-Kui Zhang ◽  
Miao Cui ◽  
Ben-Wen Li ◽  
Ya-Song Sun
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Incompressible Flow ◽  
Three Dimensional ◽  
Function Form ◽  
Combined Method ◽  
Time Step ◽  
Content Type ◽  
Artificial Compressibility ◽  
Flow And Heat Transfer

Purpose The purpose of this paper is to develop a combined method for three-dimensional incompressible flow and heat transfer by the spectral collocation method (SCM) and the artificial compressibility method (ACM), and further to study the performance of the combined method SCM-ACM for three-dimensional incompressible flow and heat transfer. Design/methodology/approach The partial differentials in space are discretized by the SCM with Chebyshev polynomial and Chebyshev–Gauss–Lobbatto collocation points. The unsteady artificial compressibility equations are solved to obtain the steady results by the ACM. Three-dimensional exact solutions with trigonometric function form and exponential function form are constructed to test the accuracy of the combined method. Findings The SCM-ACM is developed successfully for three-dimensional incompressible flow and heat transfer with high accuracy that the minimum value of variance can reach. The accuracy increases exponentially along with time marching steps. The accuracy is also improved exponentially with the increasing of nodes before stable accuracy is achieved, while it keeps stably with the increasing of the time step. The central processing unit time increases exponentially with the increasing of nodes and decreasing of the time step. Research limitations/implications It is difficult for the implementation of the implicit scheme by the developed SCM-ACM. The SCM-ACM can be used for solving unsteady impressible fluid flow and heat transfer. Practical implications The SCM-ACM is applied for two classic cases of lid-driven cavity flow and natural convection in cubic cavities. The present results show good agreement with the published results with much fewer nodes. Originality/value The combined method SCM-ACM is developed, firstly, for solving three-dimensional incompressible fluid flow and heat transfer by the SCM and ACM. The performance of SCM-ACM is investigated. This combined method provides a new choice for solving three-dimensional fluid flow and heat transfer with high accuracy.

Fluid flow and heat transfer of a stratified system during natural convection – influence of chamfered corners

2019 ◽  
Vol 29 (2) ◽  
pp. 470-486 ◽  
Author(s):  
Alireza Rahimi ◽  
Aravindhan Surendar ◽  
Aygul Z. Ibatova ◽  
Abbas Kasaeipoor ◽  
Emad Hasani Malekshah
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Natural Convection ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Three Dimensional ◽  
Immiscible Fluids ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose This paper aims to investigate the three-dimensional natural convection and entropy generation in the rectangular cuboid cavities included by chamfered triangular partition made by polypropylene. Design/methodology/approach The enclosure is filled by multi-walled carbon nanotubes (MWCNTs)-H2O nanofluid and air as two immiscible fluids. The finite volume approach is used for computation. The fluid flow and heat transfer are considered with combination of local entropy generation due to fluid friction and heat transfer. Moreover, a numerical method is developed based on three-dimensional solution of Navier–Stokes equations. Findings Effects of side ratio of triangular partitions (SR = 0.5, 1 and 2), Rayleigh number (103 < Ra < 105) and solid volume fraction (f = 0.002, 0.004 and 0.01 Vol.%) of nanofluid are investigated on both natural convection characteristic and volumetric entropy generation. The results show that the partitions can be a suitable method to control fluid flow and energy consumption, and three-dimensional solutions renders more accurate results. Originality/value The originality of this work is to study the three-dimensional natural convection and entropy generation of a stratified system.

Verification of Finite Volume Computations on Steady-State Fluid Flow and Heat Transfer

2001 ◽  
Vol 124 (1) ◽  
pp. 11-21 ◽  
Author(s):  
J. Cadafalch ◽  
C. D. Pe´rez-Segarra ◽  
R. Co`nsul ◽  
A. Oliva
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Steady State ◽  
Finite Volume ◽  
Numerical Solutions ◽  
Three Dimensional ◽  
Independent Solution ◽  
Post Processing ◽  
Square Duct ◽  
Flow And Heat Transfer

This work presents a post-processing tool for the verification of steady-state fluid flow and heat transfer finite volume computations. It is based both on the generalized Richardson extrapolation and the Grid Convergence Index GCI. The observed order of accuracy and a error band where the grid independent solution is expected to be contained are estimated. The results corresponding to the following two and three-dimensional steady-state simulations are post-processed: a flow inside a cavity with moving top wall, an axisymmetric turbulent flow through a compressor valve, a premixed methane/air laminar flat flame on a perforated burner, and the heat transfer from an isothermal cylinder enclosed by a square duct. Discussion is carried out about the certainty of the estimators obtained with the post-processing procedure. They have been shown to be useful parameters in order to assess credibility and quality to the reported numerical solutions.

Unsteady mixed convection flow at a three-dimensional stagnation point

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Amin Noor ◽  
Roslinda Nazar ◽  
Kohilavani Naganthran ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Mixed Convection ◽  
Stagnation Point ◽  
Three Dimensional ◽  
Convection Flow ◽  
Mixed Convection Flow ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Unsteady Mixed Convection

Purpose This paper aims to probe the problem of an unsteady mixed convection stagnation point flow and heat transfer past a stationary surface in an incompressible viscous fluid numerically. Design/methodology/approach The governing nonlinear partial differential equations are transformed into a system of ordinary differential equations by a similarity transformation, which is then solved numerically by a Runge – Kutta – Fehlberg method with shooting technique and a collocation method, namely, the bvp4c function. Findings The effects of the governing parameters on the fluid flow and heat transfer characteristics are illustrated in tables and figures. It is found that dual (upper and lower branch) solutions exist for both the cases of assisting and opposing flow situations. A stability analysis has also been conducted to determine the physical meaning and stability of the dual solutions. Practical implications This theoretical study is significantly relevant to the applications of the heat exchangers placed in a low-velocity environment and electronic devices cooled by fans. Originality/value The case of suction on unsteady mixed convection flow at a three-dimensional stagnation point has not been studied before; hence, all generated numerical results are claimed to be novel.

Numerical and Experimental Prediction of Transitional Characteristics of Flow and Heat Transfer in an Array of Heated Blocks

1999 ◽  
Vol 121 (3) ◽  
pp. 202-208 ◽  
Author(s):  
Y. Asako ◽  
Y. Yamaguchi ◽  
M. Faghri
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Fluid Flow ◽  
Parallel Plate ◽  
Three Dimensional ◽  
Parallel Plates ◽  
Number Range ◽  
Flow And Heat Transfer ◽  
Numerical Predictions ◽  
Experimental Prediction

Three-dimensional numerical analysis, for transitional characteristics of fluid flow and heat transfer in periodic fully developed region of an array of the heated square blocks deployed along one wall of the parallel plates duct, is carried out by using Lam-Bremhorst low-Reynolds-number two equation turbulence model. Computations were performed for Prandtl number of 0.7, in the Reynolds number range of 200 to 2000 and for two sets of geometric parameters characterizing the array. The predicted transitional Reynolds number is lower than the value for the parallel plate duct and it decreases with increasing the height above the module. Experiments were also performed for pressure drop measurements and for flow visualization and the results were compared with the numerical predictions.

A Numerical Study of Flow and Heat Transfer in a Smooth and Ribbed U-Duct With and Without Rotation

2000 ◽  
Vol 123 (2) ◽  
pp. 219-232 ◽  
Author(s):  
Y.-L. Lin ◽  
T. I.-P. Shih ◽  
M. A. Stephens ◽  
M. K. Chyu
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Fluid Flow ◽  
Mach Number ◽  
Vector Fields ◽  
Numerical Study ◽  
Density Ratio ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Flow And Heat Transfer

Computations were performed to study the three-dimensional flow and heat transfer in a U-shaped duct of square cross section under rotating and non-rotating conditions. The parameters investigated were two rotation numbers (0, 0.24) and smooth versus ribbed walls at a Reynolds number of 25,000, a density ratio of 0.13, and an inlet Mach number of 0.05. Results are presented for streamlines, velocity vector fields, and contours of Mach number, pressure, temperature, and Nusselt numbers. These results show how fluid flow in a U-duct evolves from a unidirectional one to one with convoluted secondary flows because of Coriolis force, centrifugal buoyancy, staggered inclined ribs, and a 180 deg bend. These results also show how the nature of the fluid flow affects surface heat transfer. The computations are based on the ensemble-averaged conservation equations of mass, momentum (compressible Navier-Stokes), and energy closed by the low Reynolds number SST turbulence model. Solutions were generated by a cell-centered finite-volume method that uses second-order flux-difference splitting and a diagonalized alternating-direction implicit scheme with local time stepping and V-cycle multigrid.

Sign in / Sign up

Export Citation Format

Share Document