Effects of magnetic field and viscous dissipation on entropy generation of mixed convection in porous lid-driven cavity with corner heater

2016 ◽  
Vol 26 (5) ◽  
pp. 1548-1566 ◽  
Author(s):  
Sameh E Ahmed ◽  
Hakan F. Öztop ◽  
Khaled Al-Salem
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Mixed Convection ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Hartmann Number ◽  
Heat Transfer Fluid ◽  
Content Type ◽  
Driven Cavity ◽  
Corner Heater

Purpose – The purpose of this paper is to investigate the effects of magnetic field and viscous dissipation on mixed convection heat transfer, fluid flow and entropy generation in a porous media filled square enclosure heated with corner isothermal heater. Design/methodology/approach – Finite volume method has been used to solve governing equations. A code is developed by FORTRAN and entropy generation is calculated from the obtained results of velocities and temperature. Results are presented via streamlines, isotherms, local and mean Nusselt number for different values of Richardson number (0.001=Ri=100), Hartmann number (0.001=Ha=100), Darcy number (0.001=Da=0.1), length of heaters (0.25=hx=hy=0.75) and viscous dissipation factors (10−4=ε=10−6). Findings – It is observed that entropy is generated mostly due to lid-driven wall and right side of the heater. Entropy generation decreases with increasing of Hartmann number and heat transfer increases with decreasing of viscous parameter. Originality/value – The originality of this work is to application of magnetic field and viscous dissipation on entropy generation in a lid-driven cavity with corner heater. Here, both corner heater and the external forces are original parameters.

Numerical simulation of water/alumina nanofluid mixed convection in square lid-driven cavity

2019 ◽  
Vol 30 (5) ◽  
pp. 2781-2807
Author(s):  
Davood Toghraie ◽  
Ehsan Shirani
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Mixed Convection ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Richardson Number ◽  
Hartmann Number ◽  
Two Phase ◽  
Content Type ◽  
Driven Cavity

Purpose The purpose of this paper is to investigate the mixed convection of a two-phase water–aluminum oxide nanofluid in a cavity under a uniform magnetic field. Design/methodology/approach The upper wall of the cavity is cold and the lower wall is warm. The effects of different values of Richardson number, Hartmann number, cavitation length and solid nanoparticles concentration on the flow and temperature field and heat transfer rate were evaluated. In this paper, the heat flux was assumed to be constant of 10 (W/m2) and the Reynolds number was assumed to be constant of 300 and the Hartmann number and the volume fraction of solid nanoparticles varied from 0 to 60 and 0 to 0.06, respectively. The Richardson number was considered to be 0.1, 1 and 5. Aspect ratios were 1, 1.5 and 2. Findings Comparison of the results of this paper with the results of the numerical and experimental studies of other researchers showed a good correlation. The results were presented in the form of velocity and temperature profiles, stream and isotherm lines and Nusselt numbers. The results showed that by increasing the Hartmann number, the heat transfer rate decreases. An increase from 0 to 20 in Hartmann number results in a 20 per cent decrease in Nusselt numbers, and by increasing the Hartmann number from 20 to 40, a 16 per cent decrease is observed in Nusselt number. Accordingly, it is inferred that by increasing the Hartmann number, the reduction in the Nusselt number is decreased. As the Richardson number increased, the heat transfer rate and, consequently, the Nusselt number increased. Therefore, an increase in the Richardson number results in an increase of the Nusselt number, that is, an increase in Richardson number from 0.1 to 1 and from 1 to 5 results in 37 and 47 per cent increase in Nusselt number, respectively. Originality/value Even though there have been numerous investigations conducted on convection in cavities under various configurations and boundary conditions, relatively few studies are conducted for the case of nanofluid mixed convection in square lid-driven cavity under the effect of magnetic field using two-phase model.

Nonhomogeneous model for conjugate mixed convection of nanofluid and entropy generation in an enclosure in presence of inclined magnetic field with Joule heating

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Subhasree Dutta ◽  
Somnath Bhattacharyya ◽  
Ioan Pop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Mixed Convection ◽  
Entropy Generation ◽  
Joule Heating ◽  
Conjugate Heat Transfer ◽  
Inclined Magnetic Field ◽  
Content Type ◽  
The Impact ◽  
The Magnetic Field

Purpose This study aims to numerically analyse the impact of an inclined magnetic field and Joule heating on the conjugate heat transfer because of the mixed convection of an Al2O3–water nanofluid in a thick wall enclosure. Design/methodology/approach A horizontal temperature gradient together with the shear-driven Flow creates the mixed convection inside the enclosure. The nonhomogeneous model, in which the nanoparticles have a slip velocity because of thermophoresis and Brownian diffusion, is adopted in the present study. The thermal performance is evaluated by determining the entropy generation, which includes the contribution because of magnetic field. A control volume method over a staggered grid arrangement is adopted to compute the governing equations. Findings The Lorentz force created by the applied magnetic field has an adverse effect on the flow and thermal field, and consequently, the heat transfer and entropy generation attenuate because of the presence of magnetic force. The Joule heating enhances the fluid temperature but attenuates the heat transfer. The impact of the magnetic field diminishes as the angle of inclination of the magnetic field is increased, and it manifests as the volume fraction of nanoparticles is increased. Addition of nanoparticles enhances both the heat transfer and entropy generation compared to the clear fluid with enhancement in entropy generation higher than the rate by which the heat transfer augments. The average Bejan number and mixing-cup temperature are evaluated to analyse the thermodynamic characteristics of the nanofluid. Originality/value This literature survey suggests that the impact of an inclined magnetic field and Joule heating on conjugate heat transfer based on a two-phase model has not been addressed before. The impact of the relative slip velocity of nanoparticles diminishes as the magnetic field becomes stronger.

Magnetohydrodynamics Mixed Convection in a Lid-Driven Cavity Having a Corrugated Bottom Wall and Filled With a Non-Newtonian Power-Law Fluid Under the Influence of an Inclined Magnetic Field

2016 ◽  
Vol 8 (2) ◽  
Author(s):  
Fatih Selimefendigil ◽  
Ali J. Chamkha
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Fluid Flow ◽  
Mixed Convection ◽  
Power Law ◽  
Richardson Number ◽  
Hartmann Number ◽  
Power Law Fluid ◽  
Driven Cavity ◽  
The Magnetic Field

In this study, the problem of magnetohydrodynamics (MHD) mixed convection of lid-driven cavity with a triangular-wave shaped corrugated bottom wall filled with a non-Newtonian power-law fluid is numerically studied. The bottom corrugated wall of the cavity is heated and the top moving wall is kept at a constant lower temperature while the vertical walls of the enclosure are considered to be adiabatic. The governing equations are solved by the Galerkin weighted residual finite element formulation. The influence of the Richardson number (between 0.01 and 100), Hartmann number (between 0 and 50), inclination angle of the magnetic field (between 0 deg and 90 deg), and the power-law index (between 0.6 and 1.4) on the fluid flow and heat transfer characteristics are numerically investigated. It is observed that the effects of free convection are more pronounced for a shear-thinning fluid and the buoyancy force is weaker for the dilatant fluid flow compared to that of the Newtonian fluid. The averaged heat transfer decreases with increasing values of the Richardson number and enhancement is more effective for a shear-thickening fluid. At the highest value of the Hartmann number, the averaged heat transfer is the lowest for a pseudoplastic fluid. As the inclination angle of the magnetic field increases, the averaged Nusselt number generally enhances.

Effects of two-phase nanofluid model on convection in a double lid-driven cavity in the presence of a magnetic field

2019 ◽  
Vol 29 (4) ◽  
pp. 1272-1299 ◽  
Author(s):  
Ammar I. Alsabery ◽  
Taher Armaghani ◽  
Ali J. Chamkha ◽  
Muhammad Adil Sadiq ◽  
Ishak Hashim
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Mixed Convection ◽  
Convection Heat Transfer ◽  
Convection Heat ◽  
Square Cavity ◽  
Two Phase ◽  
Content Type ◽  
Driven Cavity ◽  
Horizontal Wall

Purpose The aim of this study is to investigate the effects of two-phase nanofluid model on mixed convection in a double lid-driven square cavity in the presence of a magnetic field. The authors believe that this work is a good contribution for improving the thermal performance and the heat transfer enhancement in some engineering instruments. Design/methodology/approach The current work investigates the problem of mixed convection heat transfer in a double lid-driven square cavity in the presence of magnetic field. The used cavity is filled with water-Al2O3 nanofluid based on Buongiorno’s two-phase model. The bottom horizontal wall is maintained at a constant high temperature and moves to the left/right, while the top horizontal wall is maintained at a constant low temperature and moves to the right/left. The left and right vertical walls are thermally insulated. The dimensionless governing equations are solved numerically using the Galerkin weighted residual finite element method. Findings The obtained results show that the heat transfer rate enhances with an increment of Reynolds number or a reduction of Hartmann number. In addition, effects of thermophoresis and Brownian motion play a significant role in the growth of convection heat transfer. Originality/value According to above-mentioned studies and to the authors’ best knowledge, there has no study reported the MHD mixed convection heat transfer in a double lid-driven cavity using the two-phase nanofluid model. Thus, the authors of the present study believe that this work is valuable. Therefore, the aim of this comprehensive numerical study is to investigate the effects of two-phase nanofluid model on mixed convection in a double lid-driven square cavity in the presence of a magnetic field. The authors believe that this work is a good contribution for improving the thermal performance and the heat transfer enhancement in some engineering instruments.

Entropy generation optimization for MHD natural convection of a nanofluid in porous media-filled enclosure with active parts and viscous dissipation

2017 ◽  
Vol 27 (2) ◽  
pp. 379-399 ◽  
Author(s):  
M.A. Mansour ◽  
Sameh Elsayed Ahmed ◽  
Ali J. Chamkha
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Convection Flow ◽  
Negative Effects ◽  
Content Type ◽  
Volume Method

Purpose This paper aims to investigate the entropy generation due to magnetohydrodynamic natural convection flow and heat transfer in a porous enclosure filled with Cu-water nanofluid in the presence of viscous dissipation effect. The left and right walls of the cavity are thermally insulated. There are heated and cold parts, and these are placed on the bottom and top wall, respectively, whereas the remaining parts are thermally insulated. Design/methodology/approach The finite volume method is used to solve the dimensionless partial differential equations governing the problem. A comparison with previously published woks is presented and is found to be in an excellent agreement. Findings The minimization of entropy generation and local heat transfer according to different values of the governing parameters are presented in details. It is found that the presence of magnetic field has negative effects on the local entropy generation because of heat transfer and the local total entropy generation. Also, the increase in the heated part length leads to a decrease in the local Nusselt number. Originality/value This problem is original, as it has not been considered previously.

Effects of moving lid direction on mixed convection and entropy generation in a cubical cavity with longitudinal triangular fin insertion

2017 ◽  
Vol 27 (4) ◽  
pp. 839-860 ◽  
Author(s):  
Lioua Kolsi ◽  
Hakan F. Öztop ◽  
Nidal Abu-Hamdeh ◽  
Borjini Mohamad Naceur ◽  
Habib Ben Assia
Keyword(s):  
Mixed Convection ◽  
Entropy Generation ◽  
Three Dimensional ◽  
Thermal Conductivity Ratio ◽  
Governing Equations ◽  
Content Type ◽  
Driven Cavity ◽  
Triangular Fin ◽  
Cubical Cavity ◽  
3D Problem

Purpose The main purpose of this work is to arrive at a three-dimensional (3D) numerical solution on mixed convection in a cubic cavity with a longitudinally located triangular fin in different sides. Design/methodology/approach The 3D governing equations are solved via finite volume technique by writing a code in FORTRAN platform. The governing parameters are chosen as Richardson number, 0.01 ≤ Ri ≤ 10 and thermal conductivity ratio 0.01 ≤ Rc ≤ 100 for fixed parameters of Pr = 0.7 and Re = 100. Two cases are considered for a lid-driven wall from left to right (V+) and right to left (V−). Findings It is observed that entropy generation due to heat transfer becomes dominant onto entropy generation because of fluid friction. The most important parameter is the direction of the moving lid, and lower values are obtained when the lid moves from right to left. Originality The main originality of this work is to arrive at a solution of a 3D problem of mixed convection and entropy generation for lid-driven cavity with conductive triangular fin attachments.

Effect of magnetic field-dependent thermal conductivity on natural convection of magnetic nanofluid inside a square enclosure

2019 ◽  
Vol 29 (4) ◽  
pp. 1466-1489 ◽  
Author(s):  
Mohammadhossein Hajiyan ◽  
Shohel Mahmud ◽  
Mohammad Biglarbegian ◽  
Hussein A. Abdullah ◽  
A. Chamkha
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Hartmann Number ◽  
Magnetic Nanofluid ◽  
Content Type ◽  
Square Enclosure ◽  
Field Dependent

Purpose The purpose of this paper is to investigate the convective heat transfer of magnetic nanofluid (MNF) inside a square enclosure under uniform magnetic fields considering nonlinearity of magnetic field-dependent thermal conductivity. Design/methodology/approach The properties of the MNF (Fe3O4+kerosene) were described by polynomial functions of magnetic field-dependent thermal conductivity. The effect of the transverse magnetic field (0 < H < 105), Hartmann Number (0 < Ha < 60), Rayleigh number (10 <Ra <105) and the solid volume fraction (0 < φ < 4.7%) on the heat transfer performance inside the enclosed space was examined. Continuity, momentum and energy equations were solved using the finite element method. Findings The results show that the Nusselt number increases when the Rayleigh number increases. In contrast, the convective heat transfer rate decreases when the Hartmann number increases due to the strong magnetic field which suppresses the buoyancy force. Also, a significant improvement in the heat transfer rate is observed when the magnetic field is applied and φ = 4.7% (I = 11.90%, I = 16.73%, I = 10.07% and I = 12.70%). Research limitations/implications The present numerical study was carried out for a steady, laminar and two-dimensional flow inside the square enclosure. Also, properties of the MNF are assumed to be constant (except thermal conductivity) under magnetic field. Practical implications The results can be used in thermal storage and cooling of electronic devices such as lithium-ion batteries during charging and discharging processes. Originality/value The accuracy of results and heat transfer enhancement having magnetic field-field-dependent thermal conductivity are noticeable. The results can be used for different applications to improve the heat transfer rate and enhance the efficiency of a system.

Second Law Analysis of Magnetorheological Rotational Flow With Viscous Dissipation

2016 ◽  
Vol 8 (2) ◽  
Author(s):  
Abbas Hazbavi
Keyword(s):  
Magnetic Field ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Hartmann Number ◽  
Outer Cylinder ◽  
Base Flow ◽  
Convection Flow ◽  
Fluid Temperature ◽  
Brinkman Number ◽  
Fluid Elasticity

In this study, the influences of the applied magnetic field and fluid elasticity were investigated for a nonlinear viscoelastic fluid obeying the Carreau equation between concentric annulus where the inner cylinder rotates at a constant angular velocity and the outer cylinder is stationary. The governing motion and energy balance equations are coupled while viscous dissipation is taken into account, adding complexity to the already highly correlated set of differential equations. The numerical solution is obtained for the narrow gap limit and steady-state base flow. Magnetic field effect on local entropy generation due to steady two-dimensional laminar forced convection flow was investigated. This study was focused on the entropy generation characteristics and its dependency on various dimensionless parameters. The effects of the Hartmann number, the Brinkman number, the Deborah number, and the fluid elasticity on the stability of the flow were investigated. The application of the magnetic field induces a resistive force acting in the opposite direction of the flow, thus causing its deceleration. Moreover, the study shows that the presence of magnetic field tends to slowdown the fluid motion and thus increases the fluid temperature. However, the total entropy generation number decreases as the Hartmann number and fluid elasticity increase and it increases with increasing Brinkman number.

Sign in / Sign up

Export Citation Format

Share Document