Materials consumption, indoor thermal comfort and associated energy flows of urban residential buildings

2019 ◽  
Vol 37 (5) ◽  
pp. 579-596 ◽  
Author(s):  
Zhen Peng ◽  
Wu Deng ◽  
Yuanda Hong
Keyword(s):  
Energy Consumption ◽  
Thermal Comfort ◽  
Residential Buildings ◽  
Cold Climate ◽  
Embodied Energy ◽  
Insulating Materials ◽  
Content Type ◽  
Indoor Thermal Comfort ◽  
Comfort Levels ◽  
Energy Flows

Purpose From the 2000s onward, construction practices of urban residential buildings in China have shown a material transformation from clay brick to aerated concrete block. Moreover, the consumption of insulating materials for buildings has been increasing due to the new requirements in building energy-saving standards. This transformation and the increased consumption of insulating materials might have a vital impact on a building’s thermal comfort and its associated energy flows. Therefore, the purpose of this paper is to investigate the indoor thermal performance of urban residential buildings built with different materials and further discuss the correlations between indoor thermal comfort and the associated energy input. Design/methodology/approach This study investigated four residential buildings selected from four residential communities located in the cold climate zone of China. The Integrated Environment Solutions program was used to evaluate the thermal comfort levels and to quantify the operational energy consumption of the case study buildings. Additionally, the University of Bath’s Inventory of Carbon and Energy database was used to estimate the embodied energy consumption and CO2 emissions. Findings The study found that materials transition and increasing consumption did not necessarily improve indoor thermal comfort. However, the materials transition has significantly decreased the embodied energy consumption of urban residential buildings. Furthermore, the increased utilization of insulating materials has also decreased the heating and cooling energy consumption. Therefore, overall, the environmental impacts of urban residential buildings have been reduced significantly. Practical implications In the future, residential buildings completed in the 1990s will need regular maintenance, such as adding insulation. Residential buildings completed based on the latest energy-saving requirements should optimize their ventilation design, for example, by increasing the ventilation rate and by reducing solar heat gains in the summer. Originality/value This paper investigates the effects of the materials change on thermal comfort levels and the environmental impacts of urban residential buildings in the cold climate zone of China, as these have not been the focus of many previous studies.

Evaluation of vernacular and new housing indoor comfort conditions in cold climate – a field survey in eastern Turkey

2019 ◽  
Vol 13 (2) ◽  
pp. 207-226
Author(s):  
Fatma Kürüm Varolgüneş
Keyword(s):  
Thermal Comfort ◽  
Material Selection ◽  
Mechanical Systems ◽  
General Information ◽  
Cold Climate ◽  
Survey Study ◽  
Visual Comfort ◽  
Content Type ◽  
Indoor Thermal Comfort ◽  
Occupant Satisfaction

Purpose The purpose of this study is to compare vernacular and new houses in terms of indoor occupant satisfaction and thermal and visual comfort in a region with cold climatic conditions. In line with the data obtained, the contribution of passive design techniques to comfort in housing indoor will be revealed. Design/methodology/approach In this study, the comfort conditions to be provided in a residence were determined and evaluated in Bingol with the help of questionnaires applied on vernacular and new houses. The information gathered from the occupants and the survey study was mainly designed for three purposes: (i) acquiring general information about houses; (ii) acquiring general information about occupants; and (iii) inquiring about the physical comfort satisfaction of the occupants (thermal comfort and visual comfort). Findings Although the average occupant satisfaction in terms of thermal performance in vernacular houses in summer and winter is 3.91, this average is 2.01 for new houses. The average of the general visual comfort of occupants in vernacular houses is 3.59, whereas this rate is 2.63 in new houses. According to the data obtained, occupant satisfaction was higher in vernacular houses than in new houses. In general, the new settlement area is designed and positioned independently of climate and environmental conditions. This situation increases the need to use mechanical systems to provide indoor thermal comfort conditions. The increase in the need for mechanical systems leads to a significant increase in energy expenditures, as well as deterioration of health conditions in places. Research limitations/implications To ensure occupant satisfaction, indoor thermal comfort conditions and healthy environments, vernacular houses should be an example for the design and building of new houses in terms of orientation, environment relations, space dimensions and space usage in accordance with the character of the region and material selection. Originality/value There has not been a serious research on bioclimatic, socioeconomic and cultural sustainability of the vernacular architecture of Bingol. Therefore, this region has been preferred as the study area.

Low-cost retrofit packages for residential buildings in hot-humid Lagos, Nigeria

2019 ◽  
Vol 37 (3) ◽  
pp. 250-272 ◽  
Author(s):  
Nwakaego Chikaodinaka Onyenokporo ◽  
Ekele Thompson Ochedi
Keyword(s):  
Energy Consumption ◽  
Thermal Comfort ◽  
Low Income ◽  
Residential Buildings ◽  
Relevant Literature ◽  
Building Envelope ◽  
Design Strategies ◽  
Content Type ◽  
Passive Design ◽  
Reducing Energy

Purpose The purpose of this paper is to develop a set of affordable retrofit packages that can be applied to existing residential buildings in hot-humid regions to improve occupants’ thermal comfort and reduce energy consumption. Design/methodology/approach A critical review of relevant literature to identify passive design strategies for improving thermal comfort and reducing energy consumption in hot-humid climates with focus on the building envelope was conducted in addition to a simulation study of an existing building typology in study area. Findings There is enormous potential to reduce energy costs and improve thermal comfort through building retrofit packages which is a recent concept in developing countries, such as Nigeria. Analysing the results of the retrofit interventions using building energy simulation helped in developing affordable retrofit packages which had optimum effect in improving indoor comfort temperature to the neutral temperature specified for hot humid Nigeria and further down to 3°C less than that of the reference building used. The use of passive design strategies to retrofit the building might help homeowners reduce their annual energy consumption by up to 46.3 per cent just by improving the indoor thermal comfort. Originality/value In addition to improving thermal comfort and reducing energy consumption, this research identified affordable retrofit packages and considered its cost implications especially to low-income earners who form a larger population of Lagos, Nigeria, as this was not considered by many previous researchers.

scholarly journals Energy-saving potential of intermittent heating system: Influence of composite phase change wall and optimization strategy

2020 ◽  
pp. 014459872096921
Author(s):  
Yanru Li ◽  
Enshen Long ◽  
Lili Zhang ◽  
Xiangyu Dong ◽  
Suo Wang
Keyword(s):  
Energy Consumption ◽  
Thermal Comfort ◽  
Phase Change ◽  
Air Temperature ◽  
Indoor Air ◽  
Thermal Environment ◽  
Optimization Strategy ◽  
Indoor Thermal Environment ◽  
Indoor Thermal Comfort ◽  
Intermittent Heating

In the Yangtze River zone of China, the heating operation in buildings is mainly part-time and part-space, which could affect the indoor thermal comfort while making the thermal process of building envelope different. This paper proposed to integrate phase change material (PCM) to building walls to increase the indoor thermal comfort and attenuate the temperature fluctuations during intermittent heating. The aim of this study is to investigate the influence of this kind of composite phase change wall (composite-PCW) on the indoor thermal environment and energy consumption of intermittent heating, and further develop an optimization strategy of intermittent heating operation by using EnergyPlus simulation. Results show that the indoor air temperature of the building with the composite-PCW was 2–3°C higher than the building with the reference wall (normal foamed concrete wall) during the heating-off process. Moreover, the indoor air temperature was higher than 18°C and the mean radiation temperature was above 20°C in the first 1 h after stopping heating. Under the optimized operation condition of turning off the heating device 1 h in advance, the heat release process of the composite-PCW to the indoor environment could maintain the indoor thermal environment within the comfortable range effectively. The composite-PCW could decrease 4.74% of the yearly heating energy consumption compared with the reference wall. The optimization described can provide useful information and guidance for the energy saving of intermittently heated buildings.

scholarly journals Optimization of Window Design for Daylight and Thermal Comfort in Cold Climate Conditions

Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 8013
Author(s):  
Tony-Andreas Arntsen ◽  
Bozena Dorota Hrynyszyn
Keyword(s):  
Thermal Comfort ◽  
Energy Demand ◽  
National Level ◽  
Cold Climate ◽  
Alternative Methods ◽  
Indoor Thermal Comfort ◽  
Heating And Cooling ◽  
Overall Performance ◽  
European Standards ◽  
Window Design

Window design affects the overall performance of a building. It is important to include window design during the initial stages of a project since it influences the performance of daylight and thermal comfort as well as the energy demand for heating and cooling. The Norwegian building code facilitates two alternative methods for achieving a sufficient daylight, and only guidelines for adequate indoor thermal comfort. In this study, a typical Norwegian residential building was modeled to investigate whether the criteria and methods facilitate consistent and good performance through different scenario changes and furthermore, how the national regulations compare to European standards. A better insulated and more air-tight building has usually a lower annual heating demand, with only a marginal decrease in the daylight performance when the window design is unchanged. A more air-tight construction increases the risk of overheating, even in cold climates. This study confirms that a revision of the window design improves the overall performance of a building, which highlights the importance of proper window design. The pursuit of lower energy demand should not be at the expense of indoor thermal comfort considering the anticipated future weather conditions. This study indicates that criteria for thermal comfort and daylight, if clearly defined, can affect the energy demand for heating and cooling, as well as the indoor climate positively, and should be taken into account at the national level. A comparison between the national regulations and the European standards was made, and this study found that the results are not consistent.

From Construction to Operation: Achieving Indoor Thermal Comfort via Altering External Walls Specifications in Egypt

2013 ◽  
Vol 689 ◽  
pp. 250-253 ◽  
Author(s):  
Mohamed M. Mahdy ◽  
Marialena Nikolopoulou
Keyword(s):  
Energy Consumption ◽  
Thermal Comfort ◽  
Natural Ventilation ◽  
Minimum Energy ◽  
Residential Energy ◽  
Indoor Thermal Comfort ◽  
Minimum Energy Consumption ◽  
Different Types ◽  
Running Cost ◽  
The Cost

The objective of this research is to study the effect of using different material specifications for the external walls on the cost of the energy consumption for achieving internal thermal comfort. We refer to this as operation running cost, which in turn is compared to initial construction cost for each type of the used external walls. In order to achieve this objective, dynamic thermal simulation were carried out for four different types of external walls – commonly used in Egypt – in two different sets of cooling: natural ventilation and mechanical means. Experiments recommend that using the Egyptian Residential Energy Code (EREC) to achieve inner thermal comfort with the minimum energy consumption (consequently the minimum CO2 emissions) and the minimum running cost as well.

Evaluation of occupant's adaptive thermal comfort behaviour in naturally ventilated courtyard houses

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Peiman Pilechiha ◽  
Alireza Norouziasas ◽  
Hoorieh Ghorbani Naeini ◽  
Kasmir Jolma
Keyword(s):  
Thermal Comfort ◽  
Design Methodology ◽  
Construction Materials ◽  
Parametric Models ◽  
Content Type ◽  
Seasonal Movement ◽  
Indoor Thermal Comfort ◽  
Adaptive Thermal Comfort ◽  
Vernacular Buildings ◽  
Hourly Basis

PurposeIn vernacular buildings, many climatic and passive solutions have been used to create indoor thermal comfort. Seasonal occupant movement is an example of a traditional response to increasing thermal comfort. This article investigates the influence of these user behaviours on thermal comfort in courtyard houses.Design/methodology/approachParametric models of three different scenarios of courtyard houses are simulated. The courtyard houses are located in Shiraz, Iran, and share the same orientation and construction materials. To enhance the accuracy of the study, the indoor adaptive thermal comfort (ATC) analysis is performed with three different window-to-wall ratios (WWR) of 25, 50 and 75%. The ACT analysis is performed on an hourly basis for summer and winter scenarios.FindingsThe results demonstrate that the indoor ATC is 8.3% higher in winter than in the summer in the seasonal zones. During the summer, the amount of ATC is relatively sustained in all zones. Unlike common beliefs, seasonal movement can enhance the ATC, especially during winter, specifically in the northern part of the courtyard. In northern zones, the seasonal movement of occupants improves the indoor ATC from 10.1 to 23.7%, and in southern zones, the improvement is from 2.2 to 4.8%.Originality/valueThis research presents a new numerical investigation into occupants' seasonal movements in courtyard houses during summer and winter. It provides a precise pattern to show how much this seasonal movement can affect the habitant's ATC.

Sign in / Sign up

Export Citation Format

Share Document