Flow and heat transfer of non-Newtonian power-law fluids over a stretching surface with variable thermal conductivity

2019 ◽  
Vol 15 (4) ◽  
pp. 686-698 ◽  
Author(s):  
Meng Yang ◽  
Yanhai Lin
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Temperature Field ◽  
Differential Equations ◽  
Power Law ◽  
Numerical Solutions ◽  
Physical Parameters ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Power Law Fluids

Purpose The purpose of this paper is to investigate the flow and heat transfer of power-law fluids over a non-linearly stretching sheet with non-Newtonian power-law stretching features. Design/methodology/approach The governing non-linear partial differential equations are reduced to a series of ordinary differential equations by suitable similarity transformations and the numerical solutions are obtained by the shooting method. Findings As the temperature power-law index or the power-law number of the fluids increases, the dimensionless stream function, dimensionless velocity and dimensionless temperature decrease, while the velocity boundary layer and temperature boundary layer become thinner for other fixed physical parameters. The thermal diffusivity varying as a function of the temperature gradient can be used to present the characteristics of flow and heat transfer of non-Newtonian power-law fluids. Originality/value Unlike classical works, the effect of power-law viscosity on the temperature field is considered by assuming that the temperature field is similar to the velocity field with modified Fourier’s law heat conduction for power-law fluid media.

scholarly journals Flow and heat transfer past a permeable stretching/shrinking sheet in Cu−Al2O3/water hybrid nanofluid

2019 ◽  
Vol 30 (3) ◽  
pp. 1197-1222 ◽  
Author(s):  
Rusya Iryanti Yahaya ◽  
Norihan M. Arifin ◽  
Roslinda Nazar ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Numerical Solutions ◽  
Skin Friction Coefficient ◽  
The Other ◽  
Shrinking Sheet ◽  
Physical Parameters ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose The purpose of this paper is to study the flow and heat transfer of a hybrid nanofluid, Cu–Al2O3/water, past a permeable stretching/shrinking sheet. The effects of Brownian motion and thermophoresis are considered here. Design/methodology/approach Similarity transformations are used to reduce the governing partial differential equations to a system of ordinary (similarity) differential equations. A MATLAB solver called the bvp4c is then used to compute the numerical solutions of equations (12) to (14) subject to the boundary conditions of equation (15). Then, the effects of various physical parameters on the flow and thermal fields of the hybrid nanofluid are analyzed. Findings Multiple (dual) solutions are found for the basic boundary layer equations. A stability analysis is performed to see which solutions are stable and, therefore, applicable in practice and which are not stable. Besides that, a comparison is made between the hybrid nanofluid and a traditional nanofluid, Cu/water. The skin friction coefficient and Nusselt number of the hybrid nanofluid are found to be greater than that of the other nanofluid. Thus, the hybrid nanofluid has a higher heat transfer rate than the other nanofluid. However, the increase in the shrinking parameter reduces the velocity of the hybrid nanofluid. Originality/value The present results are original and new for the study of the flow and heat transfer past a permeable stretching/shrinking sheet in Cu–Al2O3/water hybrid nanofluid.

Numerical solutions of non-alignment stagnation-point flow and heat transfer over a stretching/shrinking surface in a nanofluid

2016 ◽  
Vol 26 (6) ◽  
pp. 1747-1767 ◽  
Author(s):  
Ioan Pop ◽  
Kohi Naganthran ◽  
Roslinda Nazar
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Numerical Solutions ◽  
Dual Solutions ◽  
Stagnation Point Flow ◽  
Content Type ◽  
Boundary Layer Equations ◽  
Flow And Heat Transfer ◽  
Shrinking Surface

Purpose – The purpose of this paper is to analyse numerically the steady stagnation-point flow of a viscous and incompressible fluid over continuously non-aligned stretching or shrinking surface in its own plane in a water-based nanofluid which contains three different types of nanoparticles, namely, Cu, Al2O3 and TiO2. Design/methodology/approach – Similarity transformation is used to convert the system of boundary layer equations which are in the form of partial differential equations into a system of ordinary differential equations. The system of similarity governing equations is then reduced to a system of first-order differential equations and solved numerically using the bvp4c function in Matlab software. Findings – Unique solution exists when the surface is stretched and dual solutions exist as the surface shrunk. For the dual solutions, stability analysis has revealed that the first solution (upper branch) is stable and physically realizable, while the second solution (lower branch) is unstable. The effect of non-alignment is huge for the shrinking surface which is in contrast with the stretching surface. Practical implications – The results obtained can be used to explain the characteristics and applications of nanofluids, which are widely used as coolants, lubricants, heat exchangers and micro-channel heat sinks. This problem also applies to some situations such as materials which are manufactured by extrusion, production of glass-fibre and shrinking balloon. In this kind of circumstance, the rate of cooling and the stretching/shrinking process play an important role in moulding the final product according to preferable features. Originality/value – The present results are original and new for the study of fluid flow and heat transfer over a stretching/shrinking surface for the problem considered by Wang (2008) in a viscous fluid and extends to nanofluid by using the Tiwari and Das (2007) model.

scholarly journals Flow and Heat Transfer at a Nonlinearly Shrinking Porous Sheet:The Case of Asymptotically Large Powerlaw Shrinking Rates

2013 ◽  
Vol 18 (3) ◽  
pp. 779-791 ◽  
Author(s):  
K.V. Prasad ◽  
K. Vajravelu ◽  
I. Pop
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Power Law ◽  
Numerical Solutions ◽  
Skin Friction Coefficient ◽  
Temperature Fields ◽  
Shrinking Sheet ◽  
Arbitrary Power ◽  
Keller Box Method ◽  
Flow And Heat Transfer

Abstract The boundary layer flow and heat transfer of a viscous fluid over a nonlinear permeable shrinking sheet in a thermally stratified environment is considered. The sheet is assumed to shrink in its own plane with an arbitrary power-law velocity proportional to the distance from the stagnation point. The governing differential equations are first transformed into ordinary differential equations by introducing a new similarity transformation. This is different from the transform commonly used in the literature in that it permits numerical solutions even for asymptotically large values of the power-law index, m. The coupled non-linear boundary value problem is solved numerically by an implicit finite difference scheme known as the Keller- Box method. Numerical computations are performed for a wide variety of power-law parameters (1 < m < 100,000) so as to capture the effects of the thermally stratified environment on the velocity and temperature fields. The numerical solutions are presented through a number of graphs and tables. Numerical results for the skin-friction coefficient and the Nusselt number are tabulated for various values of the pertinent parameters.

scholarly journals UNSTEADY BOUNDARY LAYERS: CONVECTIVE HEAT TRANSFER OVER A VERTICAL FLAT PLATE

2009 ◽  
Vol 50 (4) ◽  
pp. 541-549 ◽  
Author(s):  
ROBERT A. VAN GORDER ◽  
K. VAJRAVELU
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Numerical Solutions ◽  
Approximate Solutions ◽  
Shear Thinning ◽  
Momentum Equation ◽  
Physical Parameters ◽  
Flow And Heat Transfer ◽  
Special Cases ◽  
Layer Flow

AbstractIn this paper, we extend the results in the literature for boundary layer flow over a horizontal plate, by considering the buoyancy force term in the momentum equation. Using a similarity transformation, we transform the partial differential equations of the problem into coupled nonlinear ordinary differential equations. We first analyse several special cases dealing with the properties of the exact and approximate solutions. Then, for the general problem, we construct series solutions for arbitrary values of the physical parameters. Furthermore, we obtain numerical solutions for several sets of values of the parameters. The numerical results thus obtained are presented through graphs and tables and the effects of the physical parameters on the flow and heat transfer characteristics are discussed. The results obtained reveal many interesting behaviours that warrant further study of the equations related to non-Newtonian fluid phenomena, especially the shear-thinning phenomena. Shear thinning reduces the wall shear stress.

Lie Symmetry Analysis of Boundary Layer Stagnation-Point Flow and Heat Transfer of Non-Newtonian Power-Law Fluids Over a Nonlinearly Shrinking/Stretching Sheet with Thermal Radiation

2018 ◽  
Vol 19 (3-4) ◽  
pp. 415-426 ◽  
Author(s):  
G.C. Layek ◽  
Bidyut Mandal ◽  
Krishnendu Bhattacharyya ◽  
Astick Banerjee
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Thermal Radiation ◽  
Stagnation Point ◽  
Power Law ◽  
Stretching Sheet ◽  
Symmetry Analysis ◽  
Flow And Heat Transfer ◽  
Power Law Fluids ◽  
Self Similar

AbstractA symmetry analysis of steady two-dimensional boundary layer stagnation-point flow and heat transfer of viscous incompressible non-Newtonian power-law fluids over a nonlinearly shrinking/stretching sheet with thermal radiation effect is presented. Lie group of continuous symmetry transformations is employed to the boundary layer flow and heat transfer equations, that gives scaling laws and self-similar equations for a special type of shrinking/stretching velocity ($c{x^{1/3}}$) and free-stream straining velocity ($a{x^{1/3}}$) along the axial direction to the sheet. The self-similar equations are solved numerically using very efficient shooting method. For the above nonlinear velocities, the unique self-similar solution is obtained for straining velocity being always less than the shrinking/stretching velocity for Newtonian and non-Newtonian power-law fluids. The thickness of velocity boundary layer becomes thinner with power-law index for shrinking as well as stretching sheet cases. Also, the thermal boundary layer thickness decreases with increasing values the Prandtl number and the radiation parameter.

scholarly journals Dual Solutions in the Boundary Layer Flow and Heat Transfer in the Presence of Thermal Radiation with Suction Effect

2018 ◽  
Vol 7 (4.33) ◽  
pp. 17
Author(s):  
Siti Nur Aisyah Azeman ◽  
. .
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Differential Equations ◽  
Thermal Radiation ◽  
Boundary Layer Flow ◽  
Numerical Solutions ◽  
Dual Solutions ◽  
Shooting Technique ◽  
Flow And Heat Transfer ◽  
Layer Flow

The dual solutions in the boundary layer flow and heat transfer in the presence of thermal radiation is quantitatively studied. The governing partial differential equations are derived into a system of ordinary differential equations using a similarity transformation, and afterward numerical solution obtained by a shooting technique. Dual solutions execute within a certain range of opposing and assisting flow which related to these numerical solutions. The similarity equations have two branches, upper or lower branch solutions, within a certain range of the mixed convection parameters. Further numerical results exist in our observations which enable to discuss the features of the respective solutions.  

Coupling Effects of Viscous Sheet and Ambient Fluid on Boundary Layer Flow and Heat Transfer in Power-Law Fluids

2019 ◽  
Vol 141 (6) ◽  
Author(s):  
Xiaochuan Liu ◽  
Liancun Zheng ◽  
Goong Chen ◽  
Lianxi Ma
Keyword(s):  
Heat Transfer ◽  
Power Law ◽  
Numerical Solutions ◽  
Skin Friction Coefficient ◽  
Similarity Solutions ◽  
Temperature Fields ◽  
Ambient Fluid ◽  
Local Skin ◽  
Flow And Heat Transfer ◽  
Power Law Fluids

This paper investigates the flow and heat transfer of power-law fluids over a stretching sheet where the coupling dynamics influence of viscous sheet and ambient fluid is taken into account via the stress balance. A modified Fourier's law is introduced in which the effects of viscous dissipation are taken into account by assuming that the thermal conductivity is to be shear-dependent on the velocity gradient. The conditions for both velocity and thermal boundary layers admitting similarity solutions are found, and numerical solutions are computed by a Bvp4c program. The results show that the viscous sheet and rheological properties of ambient fluids have significantly influences on both velocity and temperature fields characteristics. The formation of sheet varies with the viscosity of fluid and draw ratio, which then strongly affects the relations of the local skin friction coefficient, the local Nusselt number, and the generalized Reynolds number. Moreover, for specified parameters, the flow and heat transfer behaviors are discussed in detail.

Magnetohydrodynamics Thermocapillary Marangoni Convection Heat Transfer of Power-Law Fluids Driven by Temperature Gradient

2013 ◽  
Vol 135 (5) ◽  
Author(s):  
Yanhai Lin ◽  
Liancun Zheng ◽  
Xinxin Zhang
Keyword(s):  
Heat Transfer ◽  
Temperature Gradient ◽  
Differential Equations ◽  
Power Law ◽  
Numerical Solutions ◽  
Marangoni Convection ◽  
Convection Heat Transfer ◽  
Temperature Fields ◽  
Convection Heat ◽  
Power Law Fluids

This paper presents an investigation for magnetohydrodynamics (MHD) thermocapillary Marangoni convection heat transfer of an electrically conducting power-law fluid driven by temperature gradient. The surface tension is assumed to vary linearly with temperature and the effects of power-law viscosity on temperature fields are taken into account by modified Fourier law for power-law fluids (proposed by Pop). The governing partial differential equations are converted into ordinary differential equations and numerical solutions are presented. The effects of the Hartmann number, the power-law index and the Marangoni number on the velocity and temperature fields are discussed and analyzed in detail.

scholarly journals BOUNDARY LAYER FLOW AND HEAT TRANSFER WITH VARIABLE VISCOSITY IN THE PRESENCE OF MAGNETIC FIELD

2016 ◽  
Vol 12 (7) ◽  
pp. 6412-6421
Author(s):  
Ajala O.A ◽  
Aseelebe L. O ◽  
Ogunwobi Z. O
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Differential Equations ◽  
Ordinary Differential Equations ◽  
Boundary Layer Flow ◽  
Variable Viscosity ◽  
Physical Parameters ◽  
Flow And Heat Transfer ◽  
Dimensional Boundary ◽  
Layer Flow

A steady two dimensional boundary layer flow and heat transfer with variable viscosity electrically conducting fluid at T in the presence of magnetic fields and thermal radiation was considered. The governing equations which are partial differential equations were transformed into ordinary differential equations using similarity variables, and the resulting coupled ordinary differential equations were solved using collocation method in MAPLE 18. The velocity and temperature profiles were studied graphically for different physical parameters. The effects of the parameters on velocity and temperature profile were showed.

Finite element analysis of magnetohydrodynamic flow over flat surface moving in parallel free stream with viscous dissipation and Joule heating

2018 ◽  
Vol 35 (4) ◽  
pp. 1675-1693 ◽  
Author(s):  
Santosh Chaudhary ◽  
Mohan Kumar Choudhary
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Finite Element Method ◽  
Finite Element ◽  
Differential Equations ◽  
Viscous Dissipation ◽  
Joule Heating ◽  
Flat Surface ◽  
Content Type ◽  
Flow And Heat Transfer

PurposeThe purpose of this paper is to investigate two-dimensional viscous incompressible magnetohydrodynamic boundary layer flow and heat transfer of an electrically conducting fluid over a continuous moving flat surface considering the viscous dissipation and Joule heating.Design/methodology/approachSuitable similarity variables are introduced to reduce the governing nonlinear boundary layer partial differential equations to ordinary differential equations. A numerical solution of the resulting two-point boundary value problem is carried out by using the finite element method with the help of Gauss elimination technique.FindingsA comparison of obtained results is made with the previous work under the limiting cases. Behavior of flow and thermal fields against various governing parameters like mass transfer parameter, moving flat surface parameter, magnetic parameter, Prandtl number and Eckert number are analyzed and demonstrated graphically. Moreover, shear stress and heat flux at the moving surface for various values of the physical parameters are presented numerically in tabular form and discussed in detail.Originality/valueThe work is relatively original, as very little work has been reported on magnetohydrodynamic flow and heat transfer over a continuous moving flat surface. Viscous dissipation and Joule heating are neglected in most of the previous studies. The numerical method applied to solve governing equations is finite element method which is new and efficient.

Sign in / Sign up

Export Citation Format

Share Document