Effect of infill walls on cumulative plastic deformation energy of RC frame structures

2019 ◽  
Vol 16 (2) ◽  
pp. 293-305
Author(s):  
Bing Bing Tu
Keyword(s):  
Plastic Deformation ◽  
Time History ◽  
Deformation Energy ◽  
Frame Structures ◽  
Response Analysis ◽  
Seismic Action ◽  
Rc Frame ◽  
Infill Walls ◽  
Content Type ◽  
Rc Frame Structures

Purpose A large number of earthquake damages showed that infill walls have obvious influence on the seismic damage performance of RC frame structures. The purpose of this paper is to study the effect of infill walls on the cumulative plastic deformation energy of RC frame structures, for which four RC frame structures are build and the time-history response analysis under unidirectional seismic action is presented. Design/methodology/approach The time-history response analysis under unidirectional seismic action is presented. Then the effect of periodic reduction coefficient on the cumulative plastic deformation energy of the structures, the beams and the columns is investigated. Findings Finally, the quantitative calculation formulas are provided. The results show that the periodic reduction coefficient has an obvious effect on the distribution of the accumulated plastic deformation energy, and the influence rules are presented here. Originality/value The effect of infill walls on the cumulative plastic deformation energy of RC frame structures is quantitatively analyzed here.

scholarly journals Prediction of the Fundamental Period of Infilled RC Frame Structures Using Artificial Neural Networks

2016 ◽  
Vol 2016 ◽  
pp. 1-12 ◽  
Author(s):  
Panagiotis G. Asteris ◽  
Athanasios K. Tsaris ◽  
Liborio Cavaleri ◽  
Constantinos C. Repapis ◽  
Angeliki Papalou ◽  
...  
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Fundamental Period ◽  
Critical Parameters ◽  
Frame Structures ◽  
Rc Frame ◽  
Infill Walls ◽  
Rc Structures ◽  
Artificial Neural ◽  
Rc Frame Structures

The fundamental period is one of the most critical parameters for the seismic design of structures. There are several literature approaches for its estimation which often conflict with each other, making their use questionable. Furthermore, the majority of these approaches do not take into account the presence of infill walls into the structure despite the fact that infill walls increase the stiffness and mass of structure leading to significant changes in the fundamental period. In the present paper, artificial neural networks (ANNs) are used to predict the fundamental period of infilled reinforced concrete (RC) structures. For the training and the validation of the ANN, a large data set is used based on a detailed investigation of the parameters that affect the fundamental period of RC structures. The comparison of the predicted values with analytical ones indicates the potential of using ANNs for the prediction of the fundamental period of infilled RC frame structures taking into account the crucial parameters that influence its value.

Nonlinear Analysis of a RC Frame Structure with Semi-Interlayers Damaged during Wenchuan Earthquake

2010 ◽  
Vol 156-157 ◽  
pp. 467-472
Author(s):  
Peng Tao Yu ◽  
Jing Jiang Sun
Keyword(s):  
Nonlinear Analysis ◽  
Wenchuan Earthquake ◽  
Time History ◽  
Large Earthquake ◽  
Frame Structure ◽  
Nonlinear Time History Analysis ◽  
Frame Structures ◽  
Rc Frame ◽  
Rc Frame Structures ◽  
Nonlinear Time History

Under the excitation of large earthquake, structures enter into high nonlinear stage. Currently, Opensees, Perform-3d and Canny are used as the most popular nonlinear analysis procedures. The fiber model will be introduced firstly and the nonlinear analysis models in Canny are explained in detail. Then Canny2007 is used to conduct nonlinear time history analysis on a heavily damaged frame structure with interlayer in Dujiangyan during Wenchuan Earthquake. Analysis shows that the maximum inter-story drift appears between the interlayer and its upper layer, and the heavy damage agrees well with the results of damage investigation. By comparing the damage extent of frame structures with or without interlayer, it reveals that the seismic performance of RC frame structures without interlayer is obviously better than that of ones with interlayer.

Nonlinear Seismic Analysis of Masonry Infilled RC Frame Structures

2011 ◽  
Vol 117-119 ◽  
pp. 288-294
Author(s):  
Xiao Ying Gong ◽  
Jun Wu Dai
Keyword(s):  
Seismic Design ◽  
Frame Structures ◽  
Lateral Stiffness ◽  
Rc Frame ◽  
Stiffness Ratio ◽  
Infill Wall ◽  
Infill Walls ◽  
Floor Slab ◽  
Rc Frame Structures ◽  
Lateral Stiffness Ratio

Many RC frame structures were severely damaged or collapsed in some layer. The phenomenon was significantly different from the expected failure mode in seismic design code. This paper comprehensively sums up the earthquake characteristics of masonry infilled RC frame structures. Based on an investigation of a masonry infilled RC frame structure damaged in the earthquake area, conduct the research on frail-layer caused by infill walls uneven decorated. On the hypothesis of keeping the main load-bearing component invariant, two models were considered, i. e. frame with floor slab, and frame with both floor slab and infill wall. Furthermore, divide them into groups of the bottom, the middle and the top frail-layer to discuss by changing the arrange of infill wall. Time history analyses using three-dimensional sophisticated finite element method were conducted. The major findings are: 1)infill walls may significantly alter the failure mechanism of the RC frames. 2)controlling the initial interlayers lateral stiffness ratio in a reasonable range is an effective method to avoid frail-layer damage. These findings suggest that the effects of infill wall should be considered in seismic design, keep the initial interlayers lateral stiffness ratio less than the paper suggested, and the structural elasto-plastic analysis model should take slabs and infill walls into account.

Cumulative damage effects of mainshock-aftershock sequences on RC-frame structures

2019 ◽  
Vol 32 (3-4) ◽  
pp. 157-169
Author(s):  
Lingxin Zhang ◽  
◽  
Baijie Zhu ◽  
Yunqin Xue ◽  
Jialu Ma ◽  
...  
Keyword(s):  
Cumulative Damage ◽  
Frame Structures ◽  
Rc Frame ◽  
Aftershock Sequences ◽  
Rc Frame Structures

Design Forces for Drift and Damage Control: A Second Look at the Substitute Structure Approach

1994 ◽  
Vol 10 (2) ◽  
pp. 319-331 ◽  
Author(s):  
John F. Bonacci
Keyword(s):  
Reinforced Concrete ◽  
Damage Control ◽  
Dynamic Test ◽  
Frame Structures ◽  
Rc Frame ◽  
Test Results ◽  
Structure Approach ◽  
Maximum Displacement ◽  
Design Loads ◽  
Rc Frame Structures

This paper explores the development of a method that is useful for design of reinforced concrete (RC) frame structures to resist earthquakes. The substitute structure method, originally proposed in the 1970s, makes an analogy between viscously damped linear and hysteretic response for the purpose of estimating maximum displacement. The evolution of the method is retraced in order to emphasize its unique reliance on experimental results, which are needed to establish rules for assignment of substitute linear properties. Recent dynamic test results are used to extend significantly the calibration of the method, which furnishes design loads on the basis of drift and damage control.

Sign in / Sign up

Export Citation Format

Share Document