Quantifying the Impact of Nonlinear Internal Waves on the Marine Atmospheric Surface Layer

Author(s):  
David G. Ortiz-Suslow ◽  
Ivan Savelyev ◽  
Qing Wang ◽  
John Kalogiros ◽  
Ryan Yamaguchi ◽  
...  
Author(s):  
Sean C. C. Bailey ◽  
Caleb A. Canter ◽  
Michael P. Sama ◽  
Adam L. Houston ◽  
Suzanne Weaver Smith

We use unmanned aerial vehicles to interrogate the surface layer processes during a solar eclipse and gain a comprehensive look at the changes made to the atmospheric surface layer as a result of the rapid change of insolation. Measurements of the atmospheric surface layer structure made by the unmanned systems are connected to surface measurements to provide a holistic view of the impact of the eclipse on the near-surface behaviour, large-scale turbulent structures and small-scale turbulent dynamics. Different regimes of atmospheric surface layer behaviour were identified, with the most significant impact including the formation of a stable layer just after totality and evidence of Kelvin–Helmholtz waves appearing at the interface between this layer and the residual layer forming above it. The decrease in surface heating caused a commensurate decrease in buoyant turbulent production, which resulted in a rapid decay of the turbulence in the atmospheric surface layer both within the stable layer and in the mixed layer forming above it. Significant changes in the wind direction were imposed by the decrease in insolation, with evidence supporting the formation of a nocturnal jet, as well as backing of the wind vector within the stable layer.


Purpose. Estimation of the impact of State Enterprise ‘Kolky Forestry’ pollutants emissions on atmospheric air. Methods. Environmental chemical analysis, instrumental analysis, computational method, generalization and systematization methods, comparativeanalytical, descriptive and cartographic methods. Results. The sources of pollutant emissions of State Enterprise ‘Kolky Forestry’ were examined. During the equipment operation, the following substances are emitted into the atmospheric air: iron oxide, manganese and its compounds, nitrogen oxides (in terms of dioxide), carbon monoxide, sulfur dioxide, substances in the form of chemically undifferentiated suspended solids, hydrogen sulfide, benzene, hydrocarbons, xylene, toluene, sodium hydroxide, greenhouse gases (methane, carbon dioxide, dinitrogen oxide, NMVOCs). The assessment of pollutants emissions impact on the state of air pollution is carried out according to the results of the estimated dispersion of pollutants in the air and data obtained via instrumental research methods. The concentration of pollutants in the atmospheric surface layer at the borderline of the 100 m sanitary bufferis as follows: nitrogen oxides (in terms of dioxide) – 0.18 MPC, suspended solids – 0.55 MPC, sodium hydroxide (lye, caustic soda) – 0.10 MPC. Conclusions. The estimationof pollutants concentrationon the basis of actual and estimated emission rates revealed that harmful substances concentration in the atmospheric surface layer does not exceed the maximum permissible concentration and does not have a negative effect on human health and the state of the environment at the borderline of the sanitary buffer.


2021 ◽  
Vol 6 (7) ◽  
Author(s):  
Mohammad Allouche ◽  
Gabriel G. Katul ◽  
Jose D. Fuentes ◽  
Elie Bou-Zeid

2021 ◽  
Vol 6 (6) ◽  
pp. 79
Author(s):  
Nuno M. M. Ramos ◽  
Joana Maia ◽  
Andrea R. Souza ◽  
Ricardo M. S. F. Almeida ◽  
Luís Silva

Near-infrared (NIR) reflective materials are being developed for mitigating building cooling needs. Their use contributes to broadening the range of colours, responding to the urban aesthetic demand without compromising the building performance. Despite the increase in NIR reflective pigments investigation, there is still a knowledge gap in their applicability, impact, and durability in multilayer finishing coatings of External Thermal Insulation Composite Systems (ETICS). Hence, the main goal of this work consists of evaluating the impact of incorporating NIR reflective pigments (NRP) in the solar reflectance of the surface layer of ETICS, without affecting the colour perception, as well as their influence on the colour durability and surface temperature. As such, colour, solar reflectance, and surface temperature were monitored for 2 years in dark-coloured specimens of ETICS, with and without NRP and a primer layer. It was confirmed that the main contribution of NRP is the increase of solar reflectance and, consequently, the decrease in surface temperature, especially for high exterior temperatures (around 30 ºC). Moreover, these pigments highly increase the NIR reflectance without affecting the visible colour. In addition, they contribute to maintaining the colour characteristics. The application of primer increased the surface temperature, especially for higher exterior temperatures. However, it contributes to a lower colour difference and solar reflectance variation, which is an important achievement for durability purposes.


Sign in / Sign up

Export Citation Format

Share Document