Thermal Stabilization of the Layered System $\text{Fe}_{3}\text{Zr}-\alpha-\text{Fe}$

Author(s):  
Abzal K. Zhubaev ◽  
Gulzat Zh. Omarpatsha ◽  
Amangul Sh. Amantayeva ◽  
Diana M. Bakhtiyarova
2018 ◽  
Vol 1115 ◽  
pp. 052039
Author(s):  
A K Zhubaev ◽  
B Zh Suleimanov ◽  
M Ye Bersieva ◽  
T S Mukhanbetzhan

2020 ◽  
Vol 14 (4) ◽  
pp. 7481-7497
Author(s):  
Yousef Najjar ◽  
Abdelrahman Irbai

This work covers waste energy utilization of the combined power cycle by using it in the candle raw material (paraffin) melting process and an economic study for this process. After a partial utilization of the burned fuel energy in a real bottoming steam power generation, the exhaust gas contains 0.033 of the initially burned energy. This tail energy with about 128 ºC is partly driven in the heat exchanger of the paraffin melting system. Ansys-Fluent Software was used to study the paraffin wax melting process by using a layered system that utilizes an increased interface area between the heat transfer fluid (HTF) and the phase change material (PCM) to improve the paraffin melting process. The results indicate that using 47.35 kg/s, which is 5% of the entire exhaust gas (881.33 kg/s) from the exit of the combined power cycle, would be enough for producing 1100 tons per month, which corresponds to the production quantity by real candle's factories. Also, 63% of the LPG cost will be saved, and the payback period of the melting system is 2.4 years. Moreover, as the exhaust gas temperature increases, the consumed power and the payback period will decrease.


1999 ◽  
Vol 64 (1) ◽  
pp. 138-148 ◽  
Author(s):  
Miroslav Michvocík ◽  
Dušan Mravec ◽  
Milan Hronec ◽  
Agáta Smiešková ◽  
Pavol Hudec

The influence of thermal stabilization of NH4-Y zeolite and modification of USY zeolites with solutions of hydrochloric acid on the cyclohexylation of naphthalene in the liquid phase was studied. Removal of the part of extra-framework aluminium from zeolite structure has a positive effect on both conversion of naphthalene and amount of dicyclohexylnaphthalenes formed. Modification of zeolites leads to an increase in conversion and selectivity of β-substitution in the naphthalene cyclohexylation.


1995 ◽  
Vol 30 (4) ◽  
pp. 299-303 ◽  
Author(s):  
Vasanthy Arasaratnam ◽  
Kandiah Balasubramaniam

2014 ◽  
Vol 82 (9) ◽  
pp. 1947-1959 ◽  
Author(s):  
Sojin Moon ◽  
Du-kyo Jung ◽  
George N. Phillips ◽  
Euiyoung Bae

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1283
Author(s):  
Ivan Dominguez-Candela ◽  
Jose Miguel Ferri ◽  
Salvador Cayetano Cardona ◽  
Jaime Lora ◽  
Vicent Fombuena

The use of a new bio-based plasticizer derived from epoxidized chia seed oil (ECO) was applied in a poly(lactic acid) (PLA) matrix. ECO was used due to its high epoxy content (6.7%), which led to an improved chemical interaction with PLA. Melt extrusion was used to plasticize PLA with different ECO content in the 0–10 wt.% range. Mechanical, morphological, and thermal characterization was carried out to evaluate the effect of ECO percentage. Besides, disintegration and migration tests were studied to assess the future application in packaging industry. Ductile properties improve by 700% in elongation at break with 10 wt.% ECO content. Field emission scanning electron microscopy (FESEM) showed a phase separation with ECO content equal or higher than 7.5 wt.%. Thermal stabilization was improved 14 °C as ECO content increased. All plasticized PLA was disintegrated under composting conditions, not observing a delay up to 5 wt.% ECO. Migration tests pointed out a very low migration, less than 0.11 wt.%, which is to interest to the packaging industry.


2021 ◽  
Vol 11 (4) ◽  
pp. 1723
Author(s):  
Yuri D. Ivanov ◽  
Tatyana O. Pleshakova ◽  
Ivan D. Shumov ◽  
Andrey F. Kozlov ◽  
Irina A. Ivanova ◽  
...  

Flow-based coiled systems, through which a heat transfer fluid (such as glycerol) is pumped, are widely used for thermal stabilization of bioreactors and biosensor cuvettes and cells. Previously, using horseradish peroxidase (HRP) as a model protein, we have demonstrated that the incubation of a protein solution in a flow-based system over coiled pipe with flowing glycerol leads to a change in the adsorption properties of the protein macromolecules. Herein, we have studied the effect of the glycerol flow on the properties of HRP, the solution of which was placed differently: i.e., near either the inflow or the outflow linear sections of the pipe, while the coiled section of the pipe was shielded with a grounded metallic cover. Atomic force microscopy (AFM) has been employed in order to visualize the HRP protein macromolecules adsorbed from its solution onto the mica substrate surface. The quantity of adsorbed protein was estimated based on the AFM data. The enzymatic activity of HRP was estimated by spectrophotometry. We demonstrate that a change in the properties of HRP enzyme was observed after the incubation of its solution near the inflow/outflow linear sections of the pipe with flowing glycerol. Namely, after the incubation of HRP solution near the inflow section, a decrease in the protein adsorption onto mica was observed, but its enzymatic activity remained unchanged in comparison to the control sample. In another case, when the HRP solution was incubated near the outflow section, an increased protein adsorption was observed, while the enzyme exhibited considerably lower activity.


Sign in / Sign up

Export Citation Format

Share Document