Recurrent Algorithm Of Passive Location In Sensor Network By Angle Of Arrival Of A Signal

Author(s):  
Igor O. Tovkach ◽  
Serhii Ya. Zhuk ◽  
Oleksandr S. Neuimin ◽  
Viacheslav O. Chmelov
Author(s):  
Ankur Shrivastava ◽  
Nitin Gupta ◽  
Shreya Srivastav

In wireless sensor network, node localization is helpful in reporting the event's origin, assisting querying of sensors, routing, and various cyber-physical system applications, where sensors are required to report geographically meaningful data for location-based applications. One of the accurate ways of localization is the use of anchor nodes which are generally equipped with global positioning system. However, in range-based approaches used in literature, like Angle of Arrival, the accuracy and precision decreases in case of multipath fading environment. Therefore, this chapter proposes an angle of signal propagation-based method where each node emits only two signals in a particular direction and knows its approximate position while receiving the second signal. Further, a method is proposed to define the coordinates of the nodes in reference to a local coordinate frame. The proposed method does the work with a smaller number of transmissions in the network even in the presence of malicious adversaries.


Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1558 ◽  
Author(s):  
Yao Zhang ◽  
Zhongliang Deng ◽  
Yuhui Gao

Location technology is playing an increasingly important role in urban life. Various active and passive wireless positioning technologies for mobile terminals have attracted research attention. However, positioning signals experience serious interference in high-density residential areas or in the interior of large buildings. The main type of interference is that caused by non-line-of-sight (NLOS) propagation. In this paper, we present a new method for optimizing the angle of arrival (AOA) measurement to obtain high accuracy location results based on proximal policy optimization (PPO). PPO is a new family of policy gradient methods for reinforcement learning, which can be used to adjust the sampling data under different environments using stochastic gradient ascent. Therefore, PPO can correct the NLOS propagation errors to produce a clear AOA measurement data set without building an offline fingerprinting database. Then, we used the least square method to calculate the location. The simulation result shows that the AOA passive location algorithm based on PPO produced more accurate location information.


Sensors ◽  
2020 ◽  
Vol 20 (21) ◽  
pp. 6278 ◽  
Author(s):  
Damir Arbula ◽  
Sandi Ljubic

Accurate, inexpensive, and reliable real-time indoor localization holds the key to the full potential of the context-aware applications and location-based Internet of Things (IoT) services. State-of-the-art indoor localization systems are coping with the complex non-line-of-sight (NLOS) signal propagation which hinders the use of proven multiangulation and multilateration methods, as well as with prohibitive installation costs, computational demands, and energy requirements. In this paper, we present a novel sensor utilizing low-range infrared (IR) signal in the line-of-sight (LOS) context providing high precision angle-of-arrival (AoA) estimation. The proposed sensor is used in the pragmatic solution to the localization problem that avoids NLOS propagation issues by exploiting the powerful concept of the wireless sensor network (WSN). To demonstrate the proposed solution, we applied it in the challenging context of the supermarket cart navigation. In this specific use case, a proof-of-concept navigation system was implemented with the following components: IR-AoA sensor prototype and the corresponding WSN used for cart localization, server-side application programming interface (API), and client application suite consisting of smartphone and smartwatch applications. The localization performance of the proposed solution was assessed in, altogether, four evaluation procedures, including both empirical and simulation settings. The evaluation outcomes are ranging from centimeter-level accuracy achieved in static-1D context up to 1 m mean localization error obtained for a mobile cart moving at 140 cm/s in a 2D setup. These results show that, for the supermarket context, appropriate localization accuracy can be achieved, along with the real-time navigation support, using readily available IR technology with inexpensive hardware components.


Author(s):  
Sudha H. Thimmaiah ◽  
Mahadevan G

Wireless Sensor Networks (WSN) is useful in collecting data from various sensor devices that are distributed over a network which is generally positioned in a stationary manner. Wireless sensor based communication system is an ever growing sector in the industry of communication. Wireless infrastructure is a network that enables correspondence between various devices associated through an infrastructure protocol. Finding the position or location of sensor node (Localization) is an important factor in sensor network for proving efficient service to end user. The existing technique proposed so for adopt AOA (Angle of Arrival), TOA (Time of Arrival) etc… suffers in estimating the likelihood of localization error and induces high cost of deployment. To cater this in this work the author proposes a cost effective RSS (Received signal strength) based localization technique and also proposes an adaptive information estimation to reduce or approximate the localization error in wireless sensor network. The author compares our proposed localization model with existing protocol and analyse its efficiency.


2014 ◽  
Vol 98 (7) ◽  
pp. 26-29 ◽  
Author(s):  
Deeksha Verma ◽  
Sachin Umrao ◽  
Rahul Verma ◽  
Arun Kumar Tripathi

2020 ◽  
Vol 20 (3) ◽  
pp. 13-20
Author(s):  
Jinsoo Kim ◽  
◽  
Hyukjin Kwon ◽  
Dongkyoo Shin ◽  
Sunghoon Hong

Sign in / Sign up

Export Citation Format

Share Document