scholarly journals BAN working frequency: A trade-off between antenna efficiency and propagation losses

Author(s):  
Luca Petrillo ◽  
Theodoros Mavridis ◽  
Julien Sarrazin ◽  
Jean-Michel Dricot ◽  
Aziz Benlarbi-Delai ◽  
...  
Electronics ◽  
2021 ◽  
Vol 10 (23) ◽  
pp. 2936
Author(s):  
Ming-An Chung ◽  
Cheng-Wei Hsiao ◽  
Chih-Wei Yang ◽  
Bing-Ruei Chuang

This paper proposes a small-slot antenna system (50 mm × 9 mm × 2.7 mm) for 4 × 4 multiple-input multiple-output (MIMO) on smart glasses devices. The antenna is set on the plastic temple, and the inverted F antenna radiates through the slot in the ground plane of the sputtered copper layer outside the temple. Two symmetrical antennas and slots on the same temple and series capacitive elements enhance the isolation between the two antenna ports. When both temples are equipped with the proposed antennas, 4 × 4 MIMO transmission can be achieved. The antenna substrate is made of polycarbonate (PC), and its thickness is 2.7 mm εr=2.85, tanδ=0.0092. According to the actual measurement results, this antenna has two working frequency bands when the reflection coefficient is lower than −10dB, its working frequency bandwidth at 4.58–5.72 GHz and 6.38–7.0 GHz. The proposed antenna has a peak gain of 4.3 dBi and antenna efficiency of 85.69% at 5.14 GHz. In addition, it also can obtain a peak gain of 3.3 dBi and antenna efficiency of 82.78% at 6.8 GHz. The measurement results show that this antenna has good performance, allowing future smart eyewear devices to be applied to Wi-Fi 5G (5.18–5.85 GHz) and Wi-Fi 6e (5.925–7.125 GHz).


2022 ◽  
Vol 6 (1) ◽  
Author(s):  
Po-Han Chang ◽  
Charles Lin ◽  
Amr S. Helmy

AbstractOptical devices capable of suppressing diffraction nature of light are of great technological importance to many nanophotonic applications. One important technique to achieve diffractionless optics is to exploit field canalization effect. However, current technological platforms based on metamaterial structures typically suffer from strict loss-confinement trade-off, or lack dynamic reconfigurability over device operations. Here we report an integrated canalization platform that can alleviate this performance trade-off. It is found that by leveraging material absorption of anisotropic 2D materials, the dispersion of this class of materials can flatten without increasing propagation losses and compromising confinement. The realization of such plasmon canalization can be considered using black phosphorus (BP), where topological transition from elliptic to hyperbolic curves can be induced by dynamically leveraging material absorption of BP. At the transition point, BP film can support long range, deeply subwavelength, near-diffractionless field propagation, exhibiting diffraction angle of 5.5°, propagation distance of 10λspp, and λspp < λ0/300.


1982 ◽  
Vol 14 (2) ◽  
pp. 109-113 ◽  
Author(s):  
Suleyman Tufekci
Keyword(s):  

2012 ◽  
Vol 11 (3) ◽  
pp. 118-126 ◽  
Author(s):  
Olive Emil Wetter ◽  
Jürgen Wegge ◽  
Klaus Jonas ◽  
Klaus-Helmut Schmidt

In most work contexts, several performance goals coexist, and conflicts between them and trade-offs can occur. Our paper is the first to contrast a dual goal for speed and accuracy with a single goal for speed on the same task. The Sternberg paradigm (Experiment 1, n = 57) and the d2 test (Experiment 2, n = 19) were used as performance tasks. Speed measures and errors revealed in both experiments that dual as well as single goals increase performance by enhancing memory scanning. However, the single speed goal triggered a speed-accuracy trade-off, favoring speed over accuracy, whereas this was not the case with the dual goal. In difficult trials, dual goals slowed down scanning processes again so that errors could be prevented. This new finding is particularly relevant for security domains, where both aspects have to be managed simultaneously.


Sign in / Sign up

Export Citation Format

Share Document