Low-cost hardware for a time-domain microwave system for breast health monitoring

2016 ◽  
Author(s):  
Adam Santorelli ◽  
Emily Porter ◽  
Stefano Dantas ◽  
Milica Popovic ◽  
Joshua Schwartz
Keyword(s):  
Health Monitoring ◽  
Time Domain ◽  
Low Cost ◽  
Breast Health ◽  
Microwave System

scholarly journals Sensor Networks for Structures Health Monitoring: Placement, Implementations, and Challenges—A Review

Vibration ◽  
2021 ◽  
Vol 4 (3) ◽  
pp. 551-584
Author(s):  
Samir Mustapha ◽  
Ye Lu ◽  
Ching-Tai Ng ◽  
Pawel Malinowski
Keyword(s):  
Sensor Networks ◽  
Health Monitoring ◽  
Data Transmission ◽  
System Integration ◽  
Structural Integrity ◽  
Low Cost ◽  
Data Communication ◽  
Total Cost ◽  
Design And Optimization ◽  
Successful Case

The development of structural health monitoring (SHM) systems and their integration in actual structures has become a necessity as it can provide a robust and low-cost solution for monitoring the structural integrity of and the ability to predict the remaining life of structures. In this review, we aim at focusing on one of the important issues of SHM, the design, and implementation of sensor networks. Location and number of sensors, in any SHM system, are of high importance as they impact the system integration, system performance, and accuracy of assessment, as well as the total cost. Hence we are interested in shedding the light on the sensor networks as an essential component of SHM systems. The review discusses several important parameters including design and optimization of sensor networks, development of academic and commercial solutions, powering of sensors, data communication, data transmission, and analytics. Finally, we presented some successful case studies including the challenges and limitations associated with the sensor networks.

Dynamic Simulation Control Algorithm Based on the Time Domain

2014 ◽  
Vol 568-570 ◽  
pp. 1020-1025
Author(s):  
Zhuo Wei Jiang ◽  
Chun Ming Gao
Keyword(s):  
Dynamic Simulation ◽  
Time Domain ◽  
Control Algorithm ◽  
Low Cost ◽  
Analog Filter ◽  
Cost Performance ◽  
Dynamic Simulator ◽  
Simulation Control ◽  
The Time Domain ◽  
Computation Speed

In view of badly transplanting of analog filter and low cost performance of digital filter for the washing out signal methods used by dynamic simulator, this paper proposed a computer intelligent time domain method. We decompose signal with the computer intelligence in the time domain, and convert the signal into the corresponding movement form respectively, then get the final result by overlaying them. The experimental results show that this method not only can achieve the effect of the traditional methods, better portability and faster computation speed, but also can be achieved directly on general computers.

scholarly journals Advances in the Structural Health Monitoring of Bridges Using Piezoelectric Transducers

Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4312 ◽  
Author(s):  
Yunzhu Chen ◽  
Xingwei Xue
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Piezoelectric Materials ◽  
Low Cost ◽  
Rapid Development ◽  
Concrete Strength ◽  
Steel Corrosion ◽  
Fast Response ◽  
Future Application ◽  
Structural Health

With the rapid development of the world’s transportation infrastructure, many long-span bridges were constructed in recent years, especially in China. However, these bridges are easily subjected to various damages due to dynamic loads (such as wind-, earthquake-, and vehicle-induced vibration) or environmental factors (such as corrosion). Therefore, structural health monitoring (SHM) is vital to guarantee the safety of bridges in their service lives. With its wide frequency response range, fast response, simple preparation process, ease of processing, low cost, and other advantages, the piezoelectric transducer is commonly employed for the SHM of bridges. This paper summarizes the application of piezoelectric materials for the SHM of bridges, including the monitoring of the concrete strength, bolt looseness, steel corrosion, and grouting density. For each problem, the application of piezoelectric materials in different research methods is described. The related data processing methods for four types of bridge detection are briefly summarized, and the principles of each method in practical application are listed. Finally, issues to be studied when using piezoelectric materials for monitoring are discussed, and future application prospects and development directions are presented.

scholarly journals Reliable Data Acquisition System for a Low-Cost Accelerograph Applied to Structural Health Monitoring

2020 ◽  
Vol 3 (2) ◽  
pp. 181-194
Author(s):  
Milton Muñoz ◽  
Remigio Guevara ◽  
Santiago González ◽  
Juan Carlos Jiménez
Keyword(s):  
Structural Health Monitoring ◽  
Data Acquisition ◽  
Health Monitoring ◽  
Seismic Event ◽  
Low Cost ◽  
Recording System ◽  
Continuous Recording ◽  
Remote Communication ◽  
Structural Health ◽  
Hydroelectric Dam

This paper presents and evaluates a continuous recording system designed for a low-cost seismic station. The architecture has three main blocks. An accelerometer sensor based on MEMS technology (Microelectromechanical Systems), an SBC platform (Single Board Computer) with embedded Linux and a microcontroller device. In particular, the microcontroller represents the central component which operates as an intermediate agent to manage the communication between the accelerometer and the SBC block. This strategy allows the system for data acquisition in real time. On the other hand, the SBC platform is used for storing and processing data as well as in order to configure the remote communication with the station. This proposal is intended as a robust solution for structural health monitoring (i.e. in order to characterize the response of an infrastructure before, during and after a seismic event). The paper details the communication scheme between the system components, which has been minutely designed to ensure the samples are collected without information loss. Furthermore, for the experimental evaluation the station was located in the facilities on a relevant infrastructure, specifically a hydroelectric dam. The system operation was compared and verified with respect to a certified accelerograph station. Results prove that the continuous recording system operates successfully and allows for detecting seismic events according to requirements of structural health applications (i.e. detects events with a frequency of vibration less than 100 Hz). Specifically, through the system implemented it was possible to characterize the effect of a seismic event of 4 MD reported by the regional seismology network and with epicenter located about 30 Km of the hydroelectric dam. Particularly, the vibration frequencies detected on the infrastructure are in the range of 13 Hz and 29 Hz. Regarding the station performance, results from experiments reveals an average CPU load of 51%, consequently the processes configured on the SBC platform do not involve an overload. Finally, the average energy consumption of the station is close to 2.4 W, therefore autonomy provided by the backup system is aroud of 10 hours.

Sign in / Sign up

Export Citation Format

Share Document