Smart Water Purification Technique

Author(s):  
Apurva Soni ◽  
Kushagra Singh ◽  
Praveen Kumar
1996 ◽  
pp. 33-40
Author(s):  
Mitsuo Morimoto ◽  
Hirofumi Onari ◽  
Takanori Saga ◽  
Kunio Maeda ◽  
Takashi Saitou

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3793
Author(s):  
Richard Barnes Asamoah ◽  
Abu Yaya ◽  
Paschal Nbelayim ◽  
Ebenezer Annan ◽  
Boateng Onwona-Agyeman

In this work we propose a facile method of preparing cost-effective clay-metaloxide/metal (CuO/Ag and ZnO/Ag) composite pellets for an efficient water purification technique. Clay, with intrinsic antibacterial activity, served as a membrane support for different metaloxide/Ag nanoparticles (NPs) concentrations (2.5, 5 and 10 wt.%), as the active fillers. The effect of time (24 and 48 h) on the bactericidal activity of these pellets was also monitored. The clay–nanocomposite pellets were characterized using: X-ray diffraction, X-ray fluorescence, scanning electron microscopy, transmission electron microscopy, ultraviolet–visible (UV–Vis) spectrophotometry and nitrogen desorption analysis. The antibacterial activity performance was tested using E. coli and S. aureus strains of ATCC25922 and ATCC25923, respectively, in two aqueous media (nutrient broth and nutrient-free) by the colony-forming unit method. The results showed that the clay-CuO/Ag composite with a bandgap (1.24 eV) exhibited overall best performance under all conditions and time factors of ~100% efficiency in nutrient-free medium for all concentrations and times and 20–40% efficiency in nutrient broth for 24 h. The clay-ZnO/Ag with a bandgap of 2.88 eV showed no bactericidal activity in both media, except for that with 10 wt.% ZnO/Ag which showed 100% efficiency in nutrient-free medium after 24 h. All the synthesized composites showed 100% bactericidal efficiency in nutrient free medium after 48 h. These results indicate that, the clay/metaloxide/Ag could serve as efficient water purification technique, with a potential for large-scale commercialization.


2020 ◽  
Author(s):  
Ruobin Dai ◽  
Hongyi Han ◽  
Tianlin Wang ◽  
Jiayi Li ◽  
Chuyang Y. Tang ◽  
...  

Commercial polymeric membranes are generally recognized to have low sustainability as membranes need to be replaced and abandoned after reaching the end of their life. At present, only techniques for downcycling end-of-life high-pressure membranes are available. For the first time, this study paves the way for upcycling fouled/end-of-life low-pressure membranes to fabricate new high-pressure membranes for water purification, forming a closed eco-loop of membrane recycling with significantly improved sustainability.


2018 ◽  
Vol 3 (1) ◽  
Author(s):  
Nusa Idaman Said

Water disinfection means the removal, deactivation or killing of pathogenic microorganisms. Microorganisms are destroyed or deactivated, resulting in termination of growth and reproduction. When microorganisms are not removed from drinking water, drinking water usage will cause people to fall ill. Chemical inactivation of microbiological contamination in natural or untreated water is usually one of the final steps to reduce pathogenic microorganisms in drinking water. Combinations of water purification steps (oxidation, coagulation, settling, disinfection, and filtration) cause (drinking) water to be safe after production. As an extra measure many countries apply a second disinfection step at the end of the water purification process, in order to protect the water from microbiological contamination in the water distribution system. Usually one uses a different kind of disinfectant from the one earlier in the process, during this disinfection process. The secondary disinfection makes sure that bacteria will not multiply in the water during distribution. This paper describes several technique of disinfection process for drinking water treatment. Disinfection can be attained by means of physical or chemical disinfectants. The agents also remove organic contaminants from water, which serve as nutrients or shelters for microorganisms. Disinfectants should not only kill microorganisms. Disinfectants must also have a residual effect, which means that they remain active in the water after disinfection. For chemical disinfection of water the following disinfectants can be used such as Chlorine (Cl2),  Hypo chlorite (OCl-), Chloramines, Chlorine dioxide (ClO2), Ozone (O3), Hydrogen peroxide etch. For physical disinfection of water the following disinfectants can be used is Ultraviolet light (UV). Every technique has its specific advantages and and disadvantages its own application area sucs as environmentally friendly, disinfection byproducts, effectivity, investment, operational costs etc. Kata Kunci : Disinfeksi, bakteria, virus, air minum, khlor, hip khlorit, khloramine, khlor dioksida, ozon, UV.


2017 ◽  
pp. 123-126
Author(s):  
S. V. Vorobjeva ◽  
O. V. Smirnov ◽  
V. O. Smirnova ◽  
T. V. Semenova

A correlation between the electrokinetic properties of biodispersion and the possibility of increasing the efficiency of water purification in electroprocessing is shown.


Sign in / Sign up

Export Citation Format

Share Document