Study on Geo-environment load capacity evaluation: With a case study in Longquan Mountain of Chengdu

Author(s):  
Wang Meng ◽  
Qiao Jianping ◽  
Yang Zongji ◽  
Tian Hongling ◽  
Huang Dong
2021 ◽  
Vol 9 (8) ◽  
pp. 839
Author(s):  
Tarek N. Salem ◽  
Nadia M. Elkhawas ◽  
Ahmed M. Elnady

The erosion of limestone and calcarenite ridges that existed parallel to the Mediterranean shoreline forms the calcareous sand (CS) formation at the surface layer of Egypt's northern coast. The CS is often combined with broken shells which are considered geotechnically problematic due to their possible crushability and relatively high compressibility. In this research, CS samples collected from a site along the northern coast of Egypt are studied to better understand its behavior under normal and shear stresses. Reconstituted CS specimens with different ratios of broken shells (BS) are also investigated to study the effect of BS ratios on the soil mixture strength behavior. The strength is evaluated using laboratory direct-shear and one-dimensional compression tests (oedometer test). The CS specimens are not exposed to significant crushability even under relatively high-stress levels. In addition, a 3D finite element analysis (FEA) is presented in this paper to study the degradation offshore pile capacity in CS having different percentages of BS. The stress–strain results using oedometer tests are compared with a numerical model, and it gave identical matching for most cases. The effects of pile diameter and embedment depth parameters are then studied for the case study on the northern coast. Three different mixing ratios of CS and BS have been used, CS + 10% BS, CS + 30% BS, and CS + 50% BS, which resulted in a decrease of the ultimate vertical compression pile load capacity by 8.8%, 15%, and 16%, respectively.


1978 ◽  
Vol 192 (1) ◽  
pp. 81-92
Author(s):  
B. B. Hundy ◽  
S. Broadstock

The use of aluminium alloy instead of steel for the structural components of a 32 ton articulated lorry has been examined. The probable manufacturing difficulties have been assessed and shown to be minimal. The savings in weight possible by using aluminium have been calculated from a structural analysis of the cab, tractor chassis and trailer and from this and an assessment of the manufacturing processes the extra cost of manufacturing in aluminium has been determined. A typical case study shows that this extra cost can be easily recovered by utilising the increased load capacity of the vehicle during the first few years of its life.


Erdkunde ◽  
2021 ◽  
Vol 75 (2) ◽  
pp. 139-162
Author(s):  
M. Belén Gómez-Martín ◽  
Xosé A. Armesto-López ◽  
Martí Cors-Iglesias

This paper seeks to contribute to existing literature by exploring the potential impacts of Peer-to-Peer (p2p) accommodation on a rural mountain area in the Pyrenees in Catalonia (Spain). The results indicate how widely p2p accommodation can penetrate areas of this kind. The findings suggest that this phenomenon has brought few benefits for local development and has created severe competition for conventional tourism accommodation, despite having a smaller economic impact in terms of job creation and tourist spending. In addition, the relative ease with which it avoids administrative and fiscal controls has negative repercussions for the tax revenues of local authorities. The growth in tourist rental properties is also having harmful effects on the study area in terms of its tourist load capacity, and the high pressure it puts on housing stock is causing shortages in residential housing and sharp price increases.


2020 ◽  
Author(s):  
Okan Özcan ◽  
Orkan Özcan

<p>Evaluating the multi-hazard performance of river crossing bridges under probable earthquake, flood, and scouring scenarios is a cumbersome task in performance-based engineering. The loss of lateral load capacity at bridge foundations may induce bridges to become highly vulnerable to failure when the effects of scour and floods are combined. Besides, the assessment of local scouring mechanism around bridge piers provides information for decision‐making regarding the pile footing design and for predicting the safety of bridges under critical scoured conditions. Thereby, accurate high-resolution Digital Elevation Models (DEMs) are critical for many hydraulic applications such as erosion, hydraulic modelling, sediment transport, and morphodynamics. In the present study, an automated unmanned aerial vehicle (UAV) based multi-hazard performance assessment system was developed to respond to rapid performance evaluation and performance prediction needs for river crossing reinforced concrete (RC) bridges. The Bogacay Bridge constructed over Bogacay in Antalya, Turkey was selected as the case study. In the developed system, firstly the seasonally acquired UAV measurements were used to obtain the DEMs of the river bed from 2016 to 2019. The transverse cross sections of the river bed that were taken close to the inspected bridge were used to measure the depth of the scoured regions along the bridge piles under the present conditions. Separately, in conjunction with the flood simulation and validation with 2003 flood event (corresponds to Q<sub>50</sub>=1940 m<sup>3</sup>/s), the scour depth after maximum probable flood load according to the return period of 500 years (Q<sub>500</sub>=2560 m<sup>3</sup>/s) were predicted by HEC-RAS software. Afterwards, the 3D finite element model (FEM) of the bridge was constituted automatically with the developed code considering the scoured piles. The flood loads were exerted on the modeled bridge with regard to the HEC-RAS flood inundation map and relevant water depth estimations around the bridge piers. For the seismic evaluation, nonlinear time history analyses (THA) were conducted by using scaled eleven scaled earthquake acceleration records that were acting in both principal axes of the bridge simultaneously by considering maximum direction spectra (SaRotD100) as compatible with the region seismicity. In the analyses; as the scour depth increased, the fundamental periods, shear forces and the bending moments were observed to increase while the pile lateral load capacities diminished. Therefore, the applicability of the proposed system was verified using the case study bridge.</p>


Sign in / Sign up

Export Citation Format

Share Document