UAV Based Multi-Hazard Vulnerability Assessment System for Bridges Exposed to Scour

Author(s):  
Okan Özcan ◽  
Orkan Özcan

<p>Evaluating the multi-hazard performance of river crossing bridges under probable earthquake, flood, and scouring scenarios is a cumbersome task in performance-based engineering. The loss of lateral load capacity at bridge foundations may induce bridges to become highly vulnerable to failure when the effects of scour and floods are combined. Besides, the assessment of local scouring mechanism around bridge piers provides information for decision‐making regarding the pile footing design and for predicting the safety of bridges under critical scoured conditions. Thereby, accurate high-resolution Digital Elevation Models (DEMs) are critical for many hydraulic applications such as erosion, hydraulic modelling, sediment transport, and morphodynamics. In the present study, an automated unmanned aerial vehicle (UAV) based multi-hazard performance assessment system was developed to respond to rapid performance evaluation and performance prediction needs for river crossing reinforced concrete (RC) bridges. The Bogacay Bridge constructed over Bogacay in Antalya, Turkey was selected as the case study. In the developed system, firstly the seasonally acquired UAV measurements were used to obtain the DEMs of the river bed from 2016 to 2019. The transverse cross sections of the river bed that were taken close to the inspected bridge were used to measure the depth of the scoured regions along the bridge piles under the present conditions. Separately, in conjunction with the flood simulation and validation with 2003 flood event (corresponds to Q<sub>50</sub>=1940 m<sup>3</sup>/s), the scour depth after maximum probable flood load according to the return period of 500 years (Q<sub>500</sub>=2560 m<sup>3</sup>/s) were predicted by HEC-RAS software. Afterwards, the 3D finite element model (FEM) of the bridge was constituted automatically with the developed code considering the scoured piles. The flood loads were exerted on the modeled bridge with regard to the HEC-RAS flood inundation map and relevant water depth estimations around the bridge piers. For the seismic evaluation, nonlinear time history analyses (THA) were conducted by using scaled eleven scaled earthquake acceleration records that were acting in both principal axes of the bridge simultaneously by considering maximum direction spectra (SaRotD100) as compatible with the region seismicity. In the analyses; as the scour depth increased, the fundamental periods, shear forces and the bending moments were observed to increase while the pile lateral load capacities diminished. Therefore, the applicability of the proposed system was verified using the case study bridge.</p>

2020 ◽  
Vol 144 ◽  
pp. 01008
Author(s):  
Shaolin Yue ◽  
Huan Zhou ◽  
Wenlong Zhu ◽  
Minxi Zhang

The riverbeds or sea beds are usually composed of multi-layers of sediments. The scour around bridge piers sited on such beds is vital to the bridge safety, but is still very difficult to be predicated as its complicated interaction between the flow and bed layers. A simple model is proposed in this study for calculating the local scour maximum depth around bridge piers sited on multi-layer of sedimentary bed, which is based on HEC-18 formula revised by Richardson and Davis (2001) and the formula of the repose angle of sediment particles proposed by Cheng (1993). This model considers the particle sorting when the scour proceeds. An application of the model into the local scour depth of Guopan bridge pier sited on the Weihe River bed in Baoji city of China preliminarily demonstrates its reliability to calculate the local scour maximum depth around bridge piers sited on multi-layer of sedimentary bed.


2016 ◽  
Vol 2016 ◽  
pp. 1-12 ◽  
Author(s):  
Anxin Guo ◽  
Huixing Gao

This paper investigates the seismic performance of posttensioned concrete piers with external viscoelastic dampers to improve the energy dissipation capacity of this type of structure. An installation scheme for viscoelastic dampers on bridge piers is proposed, and the mechanical models of the damper are analyzed according to the installation scheme. By attaching the viscoelastic dampers to the posttensioned bridge piers, the analytical model of the hybrid system is established using the OpenSees finite element analysis package. Cyclic behavior and time history analyses are conducted on a posttensioned bridge with and without viscoelastic dampers using the established finite element model. The analysis results indicate that the viscoelastic dampers can effectively improve the seismic performance of the bridge structures with posttensioned piers.


Author(s):  
Saif Aldabagh ◽  
Saqib Khan ◽  
M. Shahria Alam

Design codes in the United States and Canada limit the use of high-strength steel (HSS) and high-strength concrete (HSC) to bridge components that are expected to remain elastic during a seismic event. Although HSS and HSC have higher tensile and compressive strengths, respectively, their lower inelastic strain capacities impose for such restrictions. To assess the seismic performance of HSS and HSC, the pier of an existing bridge is redesigned using concrete compressive strength of 50 and 80 MPa, and reinforcement yield strength of 420, 690, and 830 MPa. Static pushover and nonlinear dynamic time-history analyses were performed to generate force-deformation and seismic fragility curves. Bridge piers incorporating HSS and HSC attained the maximum load capacity yet were the least ductile. They were less seismically vulnerable than those incorporating conventional materials at minimal and repairable damage states, but not at extensive and probable replacement damage states.


2019 ◽  
Vol 4 (2) ◽  
pp. 21 ◽  
Author(s):  
Nissrine Boujia ◽  
Franziska Schmidt ◽  
Christophe Chevalier ◽  
Dominique Siegert ◽  
Damien Pham van Bang

Local scour is the removal of soil around bridge foundations under the erosive action of flowing water. This hydraulic risk has raised awareness of the need for developing continuous monitoring techniques to estimate scour depth around bridge piers and abutments. One of the emerging techniques is based on monitoring the vibration frequency of either bridge piers or a driven sensor in the riverbed. The sensor proposed in this study falls into the second category. Some unresolved issues are investigated: the effect of the geometry and material of the sensor, the effect of the embedded length and the effect of soil type. To this end, extensive laboratory tests are performed using rods of different materials, with various geometries and lengths. These tests are conducted in both dry sand and a soft clayey soil. Since the sensor will be placed in the riverbed, it is crucial to evaluate the effect of immersed conditions on its response. A numerical 3D finite-element model was developed and compared against experimental data. This model was then used to compute the ‘wet’ frequencies of the sensor. Finally, based on both the experimental and numerical results, an equivalent cantilever model is proposed to correlate the variation of the frequency of the sensor to the scour depth.


2018 ◽  
Vol 40 ◽  
pp. 03007
Author(s):  
Fong-Zuo Lee ◽  
Jihn-Sung Lai ◽  
Yuan-Bin Lin ◽  
Kuo-Chun Chang ◽  
Xiaoqin Liu ◽  
...  

In practice, it is a major challenge in real-time simulation and prediction of bridge pier scour depth, especially using 3-D numerical model. The simulation time spend too much to use 3-D numerical model simulation and inefficiently to predict bridge pier scour depth in real-time. With heavy rainfall during flood season in Taiwan, abundant sediment with flash flood from upstream watershed is transported to downstream river reaches and transportation time is limited within one day. The flood flow tends to damage bridge structures and affect channel stabilization in fluvial rivers. In addition, the main factors affecting the erosional depth around bridge piers and river bed stabilization are hydrological and hydrographic characteristics in river basin, the scouring and silting of river bed section near the bridge piers, the bridge geometry and protection works of bridge piers. Therefore, based on the observed rainfall data provided by the Central Weather Bureau and the hydrological conditions provided by the Water Resources Agency during flood event as the boundary condition, we develop an effective simulation system for scour depth of bridge piers. The scour depth at the bridge pier is observed by the National Center for Research on Earthquake Engineering for model calibration. In this study, an innovative scour monitoring system using vibration-based Micro-Electro Mechanical Systems (MEMS) sensors was applied. This vibration-based MEMS sensor was packaged inside a stainless sphere with the proper protection of the full-filled resin, which can measure free vibration signals to detect scouring/deposition processes at the bridge pier. It has demonstrated that the measurement system for monitoring bridge scour depth evolution is quite successful in the field.


2021 ◽  
Vol 11 (3) ◽  
pp. 906
Author(s):  
Payam Tehrani ◽  
Denis Mitchell

The seismic responses of continuous multi-span reinforced concrete (RC) bridges were predicted using inelastic time history analyses (ITHA) and incremental dynamic analysis (IDA). Some important issues in ITHA were studied in this research, including: the effects of using artificial and natural records on predictions of the mean seismic demands, effects of displacement directions on predictions of the mean seismic response, the use of 2D analysis with combination rules for prediction of the response obtained using 3D analysis, and prediction of the maximum radial displacement demands compared to the displacements obtained along the principal axes of the bridges. In addition, IDA was conducted and predictions were obtained at different damage states. These issues were investigated for the case of regular and irregular bridges using three different sets of natural and artificial records. The results indicated that the use of natural and artificial records typically resulted in similar predictions for the cases studied. The effect of displacement direction was important in predicting the mean seismic response. It was shown that 2D analyses with the combination rules resulted in good predictions of the radial displacement demands obtained from 3D analyses. The use of artificial records in IDA resulted in good prediction of the median collapse capacity.


Author(s):  
Mark N. Landers ◽  
David S. Mueller

Field measurements of channel scour at bridges are needed to improve the understanding of scour processes and the ability to accurately predict scour depths. An extensive data base of pier-scour measurements has been developed over the last several years in cooperative studies between state highway departments, the Federal Highway Administration, and the U.S. Geological Survey. Selected scour processes and scour design equations are evaluated using 139 measurements of local scour in live-bed and clear-water conditions. Pier-scour measurements were made at 44 bridges around 90 bridge piers in 12 states. The influence of pier width on scour depth is linear in logarithmic space. The maximum observed ratio of pier width to scour depth is 2.1 for piers aligned to the flow. Flow depth and scour depth were found to have a relation that is linear in logarithmic space and that is not bounded by some critical ratio of flow depth to pier width. Comparisons of computed and observed scour depths indicate that none of the selected equations accurately estimate the depth of scour for all of the measured conditions. Some of the equations performed well as conservative design equations; however, they overpredict many observed scour depths by large amounts. Some equations fit the data well for observed scour depths less than about 3 m (9.8 ft), but significantly underpredict larger observed scour depths.


Sign in / Sign up

Export Citation Format

Share Document