Statistical lag time in fluctuation model of liquid dielectric breakdown and experimental results

AbstractWe discuss the gate electrode effects on SiO2 degradation in MOS structures. The gate electrode material was poly‐silicon, but the impurity doping procedure was varied in terms of species and concentrations. First, the origin of the substrate hole current observed in n‐MOSFETs, by injecting electrons from the silicon substrate, is discussed in terms of oxide thickness and gate electrode doping species, because the dielectric breakdown is closely related to the total hole fluence in the oxide. The effects of the gate electrode on the oxide network structure and on the Si/SiO2 interface are also experimentally investigated. Finally, the experimental results obtained for Qbd of different gate electrode MOSFETs are shown, including the polarity dependence of Qbd. Furthermore, the percolation analysis to explain the polarity dependence is introduced, since the dielectric breakdown process is really stochastic.

Download Full-text

Ameliorated Mechanical and Dielectric Properties of Heat-Resistant Radome Cyanate Composites

Molecules ◽

10.3390/molecules25143117 ◽

2020 ◽

Vol 25 (14) ◽

pp. 3117

Author(s):

Hou-Yu Li ◽

Chang-Ming Li ◽

Jun-Guo Gao ◽

Wei-Feng Sun

Keyword(s):

High Temperature ◽

Dielectric Properties ◽

Heat Resistance ◽

Dielectric Breakdown ◽

Wave Transmission ◽

Experimental Results ◽

Electrical Insulation ◽

Breakdown Field ◽

Tensile Fracture ◽

Heat Resistant

In order to improve the mechanical and dielectric properties of radome cyanate, a synergistic reinforcement method is employed to develop a resin-based ternary-composite with high heat-resistance and preferable radar-band transmission, which is expected to be applied to fabricate radomes capable of resisting high temperature and strong electric field. According to copolymerization characteristics and self-curing mechanism, epoxy resin (EP) and bismaleimide (BMI) are employed as reinforcements mixed into a cyanate ester (CE) matrix to prepare CE/BMI/EP composites of a heat-resistant radome material by high-temperature viscous-flow blending methods under the catalysis of aluminum acetylpyruvate. The crystallization temperature, transition heat, and reaction rate of cured polymers were tested to analyze heat-resistance characteristics and evaluate material synthesis processes. Scanning electron microscopy was used to characterize the micro-morphology of tensile fracture, which was combined with the tensile strength test and dynamic thermomechanical analysis to investigate the composite modifications on tenacity and rigidity. Weibull statistics were performed to analyze the experimental results of the dielectric breakdown field, and the dielectric-polarization and wave-transmission performances were investigated according to alternative current dielectric spectra. Compared with the pure CE and the CE composites individually reinforced by EP or BMI, the CE/BMI/EP composite acquires the most significant amelioration in both the mechanical and electrical insulation performances as indicated by the breaking elongation and dielectric breakdown strength being simultaneously improved by 40%, which are consistently manifested by the obviously increased transverse lines uniformly distributed on the fracture cross-section. Furthermore, the glass-transition temperature of CE/BMI/EP composite reaches the highest values of nearly 300 °C, with the relative dielectric constant and dielectric loss being mostly reduced to less than 3.2 and 0.01, respectively. The experimental results demonstrate that the CE/BMI/EP composite is a highly-qualified wave-transmission material with preferences in mechanical, thermostability, and electrical insulation performances, suggesting its prospective applications in low-frequency transmittance radomes.

Download Full-text

Diagnostics of Gold Laser Plasmas

International Astronomical Union Colloquium ◽

10.1017/s0252921100108085 ◽

1988 ◽

Vol 102 ◽

pp. 357-360

Author(s):

J.C. Gauthier ◽

J.P. Geindre ◽

P. Monier ◽

C. Chenais-Popovics ◽

N. Tragin ◽

...

Keyword(s):

Experimental Results ◽

Pure Gold ◽

Electronic Temperature ◽

X Ray ◽

Laser Plasmas ◽

Collisional Radiative Model ◽

Radiative Model

AbstractIn order to achieve a nickel-like X ray laser scheme we need a tool to determine the parameters which characterise the high-Z plasma. The aim of this work is to study gold laser plasmas and to compare experimental results to a collisional-radiative model which describes nickel-like ions. The electronic temperature and density are measured by the emission of an aluminium tracer. They are compared to the predictions of the nickel-like model for pure gold. The results show that the density and temperature can be estimated in a pure gold plasma.

Download Full-text

Effects of Electrical Discharges in Low Pressure Gases on the Morphology of Polyethylene Crystals

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100052730 ◽

1974 ◽

Vol 32 ◽

pp. 544-545

Author(s):

L.H. Bolz ◽

D.H. Reneker

Keyword(s):

Power Distribution ◽

Electrical Discharge ◽

Dielectric Breakdown ◽

Ionic Species ◽

Low Pressure ◽

Polymer Surfaces ◽

Electrical Discharges ◽

Adhesive Bonds ◽

Power Distribution Lines ◽

Modification Of The Surface

The attack, on the surface of a polymer, by the atomic, molecular and ionic species that are created in a low pressure electrical discharge in a gas is interesting because: 1) significant interior morphological features may be revealed, 2) dielectric breakdown of polymeric insulation on high voltage power distribution lines involves the attack on the polymer of such species created in a corona discharge, 3) adhesive bonds formed between polymer surfaces subjected to such SDecies are much stronger than bonds between untreated surfaces, 4) the chemical modification of the surface creates a reactive surface to which a thin layer of another polymer may be bonded by glow discharge polymerization.

Download Full-text

Observation of Phase Contrast Images in STEM and CTEM Modes by Using 100 kV Field Emission Electron Gun

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100051967 ◽

1974 ◽

Vol 32 ◽

pp. 390-391

Author(s):

Y. Harada ◽

T. Goto ◽

H. Koike ◽

T. Someya

Keyword(s):

Field Emission ◽

Phase Contrast ◽

Image Formation ◽

Fresnel Diffraction ◽

Experimental Results ◽

Electron Gun ◽

Scanning Microscopy ◽

Emission Electron ◽

Lattice Images

Since phase contrasts of STEM images, that is, Fresnel diffraction fringes or lattice images, manifest themselves in field emission scanning microscopy, the mechanism for image formation in the STEM mode has been investigated and compared with that in CTEM mode, resulting in the theory of reciprocity. It reveals that contrast in STEM images exhibits the same properties as contrast in CTEM images. However, it appears that the validity of the reciprocity theory, especially on the details of phase contrast, has not yet been fully proven by the experiments. In this work, we shall investigate the phase contrast images obtained in both the STEM and CTEM modes of a field emission microscope (100kV), and evaluate the validity of the reciprocity theory by comparing the experimental results.

Download Full-text

A new dissociation mode for dislocations in silicon

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100108878 ◽

1978 ◽

Vol 36 (1) ◽

pp. 346-347

Author(s):

A. Ourmazd ◽

G.R. Booker ◽

C.J. Humphreys

Keyword(s):

Detailed Examination ◽

Experimental Results ◽

Dislocation Network ◽

Weak Beam ◽

Phosphorus Doped

A (111) phosphorus-doped Si specimen, thinned to give a TEM foil of thickness ∼ 150nm, contained a dislocation network lying on the (111) plane. The dislocation lines were along the three <211> directions and their total Burgers vectors,ḇt, were of the type , each dislocation being of edge character. TEM examination under proper weak-beam conditions seemed initially to show the standard contrast behaviour for such dislocations, indicating some dislocation segments were undissociated (contrast A), while other segments were dissociated to give two Shockley partials separated by approximately 6nm (contrast B) . A more detailed examination, however, revealed that some segments exhibited a third and anomalous contrast behaviour (contrast C), interpreted here as being due to a new dissociation not previously reported. Experimental results obtained for a dislocation along [211] with for the six <220> type reflections using (g,5g) weak-beam conditions are summarised in the table below, together with the relevant values.

Download Full-text

Multislice calculations of RHEED patterns from vicinal Si (001)

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100150836 ◽

1993 ◽

Vol 51 ◽

pp. 1000-1001

Author(s):

Scott Lordi

Keyword(s):

Misorientation Angle ◽

Incident Angle ◽

Incident Beam ◽

Experimental Results ◽

Bragg Condition ◽

Vicinal Surfaces ◽

Kinematic Theory ◽

Step Edges

Vicinal Si (001) surfaces are interesting because they are good substrates for the growth of III-V semiconductors. Spots in RHEED patterns from vicinal surfaces are split due to scattering from ordered step arrays and this splitting can be used to determine the misorientation angle, using kinematic arguments. Kinematic theory is generally regarded to be inadequate for the calculation of RHEED intensities; however, only a few dynamical RHEED simulations have been attempted for vicinal surfaces. The multislice formulation of Cowley and Moodie with a recently developed edge patching method was used to calculate RHEED patterns from vicinal Si (001) surfaces. The calculated patterns are qualitatively similar to published experimental results and the positions of the split spots quantitatively agree with kinematic calculations.RHEED patterns were calculated for unreconstructed (bulk terminated) Si (001) surfaces misoriented towards [110] ,with an energy of 15 keV, at an incident angle of 36.63 mrad ([004] bragg condition), and a beam azimuth of [110] (perpendicular to the step edges) and the incident beam pointed down the step staircase.

Download Full-text