Iterative Reweighted Local Cross Correlation Method for Nonlinear Registration of Multiphase Liver CT Images

Author(s):  
Chongfei Huang ◽  
Chenhui Qiu ◽  
Zhiyi Peng ◽  
Jing Yuan ◽  
Dexing Kong
Author(s):  
D. E. Luzzi ◽  
L. D. Marks ◽  
M. I. Buckett

As the HREM becomes increasingly used for the study of dynamic localized phenomena, the development of techniques to recover the desired information from a real image is important. Often, the important features are not strongly scattering in comparison to the matrix material in addition to being masked by statistical and amorphous noise. The desired information will usually involve the accurate knowledge of the position and intensity of the contrast. In order to decipher the desired information from a complex image, cross-correlation (xcf) techniques can be utilized. Unlike other image processing methods which rely on data massaging (e.g. high/low pass filtering or Fourier filtering), the cross-correlation method is a rigorous data reduction technique with no a priori assumptions.We have examined basic cross-correlation procedures using images of discrete gaussian peaks and have developed an iterative procedure to greatly enhance the capabilities of these techniques when the contrast from the peaks overlap.


2013 ◽  
Vol 58 (2) ◽  
pp. 122-125 ◽  
Author(s):  
O.V. Gnatovskyy ◽  
◽  
A.M. Negriyko ◽  
V.O. Gnatovskyy ◽  
A.V. Sidorenko ◽  
...  

Sensors ◽  
2020 ◽  
Vol 21 (1) ◽  
pp. 222
Author(s):  
Tao Li ◽  
Chenqi Shi ◽  
Peihao Li ◽  
Pengpeng Chen

In this paper, we propose a novel gesture recognition system based on a smartphone. Due to the limitation of Channel State Information (CSI) extraction equipment, existing WiFi-based gesture recognition is limited to the microcomputer terminal equipped with Intel 5300 or Atheros 9580 network cards. Therefore, accurate gesture recognition can only be performed in an area relatively fixed to the transceiver link. The new gesture recognition system proposed by us breaks this limitation. First, we use nexmon firmware to obtain 256 CSI subcarriers from the bottom layer of the smartphone in IEEE 802.11ac mode on 80 MHz bandwidth to realize the gesture recognition system’s mobility. Second, we adopt the cross-correlation method to integrate the extracted CSI features in the time and frequency domain to reduce the influence of changes in the smartphone location. Third, we use a new improved DTW algorithm to classify and recognize gestures. We implemented vast experiments to verify the system’s recognition accuracy at different distances in different directions and environments. The results show that the system can effectively improve the recognition accuracy.


2006 ◽  
Vol 06 (01) ◽  
pp. L1-L6
Author(s):  
JONG U. KIM ◽  
LASZLO B. KISH

We propose a new cross-correlation method that can recognize independent realizations of the same type of stochastic processes and can be used as a new kind of pattern recognition tool in biometrics, sensing, forensic, security and image processing applications. The method, which we call bispectrum correlation coefficient method, makes use of the cross-correlation of the bispectra. Three kinds of cross-correlation coefficients are introduced. To demonstrate the new method, six different random telegraph signals are tested, where four of them have the same power density spectrum. It is shown that the three coefficients can map the different stochastic processes to specific sub-volumes in a cube.


2021 ◽  
Vol 36 (9) ◽  
pp. 1294-1304
Author(s):  
Li-juan ZHANG ◽  
◽  
Run ZHANG ◽  
Dong-ming LI ◽  
Yang LI ◽  
...  

2018 ◽  
Vol 102 ◽  
pp. 102-108 ◽  
Author(s):  
Usman Mahmood ◽  
Natally Horvat ◽  
Joao Vicente Horvat ◽  
Davinia Ryan ◽  
Yiming Gao ◽  
...  

1972 ◽  
Vol 5 (4) ◽  
pp. 142-146
Author(s):  
M S Beck ◽  
N E Gough ◽  
J N Smithies

A novel method of controlling the flow rates of fluids has been devised which is particularly suitable for highly erosive fluids and slurries. The width of pulses in a pulse train actuating an on-off valve is modulated according to the error between the desired and measured flow rates and thus the ratio of the total times the valve spends in its ‘on’ and ‘off’ states is varied. The method has been tested with an on-line computer which was used to measure the flow rate of water by a cross-correlation method to determine the transit time of temperature fluctuations between two thermocouples in the pipe, and to implement the pulse width modulation control. Satisfactory results have been obtained for start-up, set-point changes and load disturbances for flow rates in the turbulent region (Re > 3 600). Future development includes the use of a fluidic diverter as the on-off device.


2007 ◽  
Vol 43 (6) ◽  
pp. 509-516
Author(s):  
V. P. Yushchenko ◽  
S. A. Litvinenko ◽  
V. B. Romodin ◽  
L. V. Shchebalkova

Sign in / Sign up

Export Citation Format

Share Document