Abstract
1—It has been shown that, in conformity with published behavior of other conducting substances (metallic sols, etc.), carbon black may be incorporated in a dielectric such as rubber without detracting from its insulating or dielectric properties. Published results to the contrary were in error, probably because the material was added in excessive amounts. 2—In addition to this effect, it has been shown that the well-known ability of carbon black to adsorb water and dissolved electrolytes endows carbon black???rubber insulating compounds of various types with improved dielectric strength, resistivity, and power factor, the specific inductive capacity remaining substantially unchanged. In some cases this improvement may exceed 50 per cent. 3—The prevailing opinion that carbon black is injurious to rubber insulating compounds which are to be used next to the wire, or which in general are expected to serve as electrical insulation, has been shown to be erroneous, provided the proper proportions are employed. 4—These results would seem to render advisable the rewriting of many specifications dealing with rubber insulating compounds, and thus make it possible to apply the well-known beneficial effects of carbon black compounding—improved toughness, density, wearing resistance, imperviousness to light, tear resistance, etc.—to the electrical insulation field, from which it has hitherto been barred. 5—Although it is strongly recommended that the proper dosage of carbon black (which must be of suitable quality and thoroughly dry) be redetermined in each case, the writers' results would indicate that up to 10 per cent of carbon black on the crude rubber (plus the rubber content of any reclaimed rubber present) will effect the desired improvement in electrical properties.
