Ultra high frequency integrated circuits using transferred substrate heterojunction bipolar transistors

Author(s):  
M. Rodwell ◽  
Q. Lee ◽  
D. Mensa ◽  
J. Guthrie ◽  
Y. Betser ◽  
...  
Author(s):  
N. David Theodore ◽  
Donald Y.C Lie ◽  
J. H. Song ◽  
Peter Crozier

SiGe is being extensively investigated for use in heterojunction bipolar-transistors (HBT) and high-speed integrated circuits. The material offers adjustable bandgaps, improved carrier mobilities over Si homostructures, and compatibility with Si-based integrated-circuit manufacturing. SiGe HBT performance can be improved by increasing the base-doping or by widening the base link-region by ion implantation. A problem that arises however is that implantation can enhance strain-relaxation of SiGe/Si.Furthermore, once misfit or threading dislocations result, the defects can give rise to recombination-generation in depletion regions of semiconductor devices. It is of relevance therefore to study the damage and anneal behavior of implanted SiGe layers. The present study investigates the microstructural behavior of phosphorus implanted pseudomorphic metastable Si0.88Ge0.12 films on silicon, exposed to various anneals.Metastable pseudomorphic Si0.88Ge0.12 films were grown ~265 nm thick on a silicon wafer by molecular-beam epitaxy. Pieces of this wafer were then implanted at room temperature with 100 keV phosphorus ions to a dose of 1.5×1015 cm-2.


1998 ◽  
Vol 525 ◽  
Author(s):  
B. Tillack ◽  
D. Bolze ◽  
G. Fischer ◽  
G. Kissinger ◽  
D. Knoll ◽  
...  

ABSTRACTWe have determined the process capability of Low Pressure (Rapid Thermal) Chemical Vapor Deposition (LP(RT)CVD) of epitaxial Si/SiGe/Si stacks for heterojunction bipolar transistors (HIBTs). The transistor parameters primarily influenced by the epitaxial characteristics were measured for 600 identically processed 4” wafers. The results demonstrate that it is possible to control accurately the epitaxial process for a 25 nm thick graded SiGe base profile with 20 % Ge and very narrow B doping (5 nm). The pipe limited device yield of about 90 % for an emitter area of 104 μm2 indicates a very low defect density in the epitaxial layer stack. The process capability indices determined from about 40,000 data points demonstrate the stability and capability of the LP(RT)CVD epitaxy with regard to manufacturing requirements.


Author(s):  
T.I. Kamins ◽  
K. Nauka ◽  
L.H. Camnitz ◽  
J.B. Kruger ◽  
J.E. Turner ◽  
...  

2002 ◽  
Vol T101 (1) ◽  
pp. 45 ◽  
Author(s):  
H. H. Radamson ◽  
B. Mohadjeri ◽  
C. Menon ◽  
A. Bentzen ◽  
J. Grahn ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document