Studies of fire prevention issues in exterior wall thermal insulation system

Author(s):  
Lei Hu ◽  
Tanshu Yang
2013 ◽  
Vol 405-408 ◽  
pp. 2438-2442
Author(s):  
Yan Feng Li ◽  
Cong Cong Xu ◽  
Xue Fei Xing ◽  
Jin Zhang ◽  
Cheng Hu

Fire overflow on exterior wall with thermal insulation system has been studied by numerical simulation. The spread laws of fire overflow are analyzed through the temperature distribution near the window. The computational results are compared with those of test in the Exterior Insulation Fire Barrier Technical Guidelines (EIFBTG). It has been found that the calculated maximum temperature points is closed to the test on the first floor, the first ceiling, and the points near the above two windows. However, there are differences between two kinds of results above two floors and ceilings, and the points near the first window. It has also shown that when the HHR is 7.5KW, the scope of damage of exterior thermal insulation layer is about 15 square meters near the window. The research would provide reference for fire protection design of exterior wall thermal insulation in the high-rise buildings.


2013 ◽  
Vol 357-360 ◽  
pp. 1480-1483
Author(s):  
Fu Dong Zhang ◽  
Ai Peng Chen ◽  
Ying Xin Zhai

This text induces the common kind of thermal insulation materials first, then analyzes the fire characteristics of building external thermal insulating system, and puts forward some fire prevention and control measures for it.


2012 ◽  
Vol 174-177 ◽  
pp. 1363-1366 ◽  
Author(s):  
Jia Wei Yao ◽  
Zhao Ming Hou ◽  
Yi Shu Yao

With the deep reform of national policy of building energy conservation and the increasing requirements of building fire protection, building insulation industry appeared a hitherto unknown development opportunity and challenge. This paper introduces the research and application of phenolic foam plate, modified phenolic foam plate with thermal insulation, fire prevention, environmental protection and other excellent properties, puts forward in the field of building energy conservation should be vigorously promoted the application of phenolic foam.


2013 ◽  
Vol 724-725 ◽  
pp. 1495-1499 ◽  
Author(s):  
Shu Hua Wei ◽  
Xiao Jun Wang

External thermal insulation system of Cast-in-situ concrete exterior wall in high-rise civil building includes with network and without network system, wherein the cast-in-place concrete exterior wall insulation without network system is the most economical and the external thermal insulation system. This system applies to new buildings, can also be applied to energy saving renovation of existing buildings. In this paper, the system technology without steelmesh is synthetically introduced so that more engineers can know and use it better.


2014 ◽  
Vol 686 ◽  
pp. 660-665
Author(s):  
Ming Gui Zhou

This paper applies the method of numerical simulation and field detection, and studied energy-saving insulation characteristics on the external walls of high-rise buildings in cold area, analyze and recommend the best arrangement of building and the most generous exterior wall insulation system suitable for cold area, and the degree of insulation materials were studied. The results show that: the mode preferred cold area is exterior insulation, insulation material made of extruded polystyrene board, frame structure filling wall preferred ceramsite hollow block.


2021 ◽  
Vol 13 (5) ◽  
pp. 2491
Author(s):  
Alena Tažiková ◽  
Zuzana Struková ◽  
Mária Kozlovská

This study deals with small investors’ demands on thermal insulation systems when choosing the most suitable solution for a family house. By 2050, seventy percent of current buildings, including residential buildings, are still expected to be in operation. To reach carbon neutrality, it is necessary to reduce operational energy consumption and thus reduce the related cost of building operations and the cost of the life cycle of buildings. One solution is to adapt envelopes of buildings by proper insulation solutions. To choose an optimal thermal insulation system that will reduce energy consumption of building, it is necessary to consider the environmental cost of insulation materials in addition to the construction cost of the materials. The environmental cost of a material depends on the carbon footprint from the initial origin of the material. This study presents the results of a multi-criteria decision-making analysis, where five different contractors set the evaluation criteria for selection of the optimal thermal insulation system. In their decision-making, they involved the requirements of small investors. The most common requirements were selected: the construction cost, the construction time (represented by the total man-hours), the thermal conductivity coefficient, the diffusion resistance factor, and the reaction to fire. The confidences of the criteria were then determined with the help of the pairwise comparison method. This was followed by multi-criteria decision-making using the method of index coefficients, also known as the method of basic variant. The multi-criteria decision-making included thermal insulation systems based on polystyrene, mineral wool, thermal insulation plaster, and aerogels’ nanotechnology. As a result, it was concluded that, currently, in Slovakia, small investors emphasize the cost of material and the coefficient of thermal conductivity and they do not care as much about the carbon footprint of the material manufacturing, the importance of which is mentioned in this study.


2011 ◽  
Vol 243-249 ◽  
pp. 6976-6983
Author(s):  
Zhi Rong Niu ◽  
Zhen Li Huang

The current domestic exterior insulation system fire incidents are frequent. The study of exterior insulation system fire performance gets more and more relevant national authorities and insiders' attention. Based on two sides wall exterior insulation system as the research object, fire prevention experimental research method of insulation system and the insulation system temperature spread rule are expounded. Reveals the insulation system burning speed and scope of the fire from spreading under the action of the fire. The temperature and temperature field change regularity and insulation system of damaged situation after combustion are compared, and structural measures to improve the insulation system fire performance role is drawn.


Sign in / Sign up

Export Citation Format

Share Document